On Thu, Nov 13, 2014 at 12:16:46AM +0200, Antonio Barrones wrote: > Mike Larkin <mlarkin <at> azathoth.net> writes: > > > > > On Fri, Oct 10, 2014 at 10:01:18AM -0700, John Magolske wrote: > > > Hi, > > > > > > I have an X31 ThinkPad on which I've installed OpenBSD. Everything > > > > > boot -c , disable radeondrm (and also disable auto xdm start). > > > > See if you can zzz/resume from the console without radeondrm running. > > > > That will at least give us a place to start. > > > > Another thing you can try is seeing if the machine is in ddb on resume > > for some reason. Try a few (3 or 4) "bo re" commands (enter after each). > > See > > if the machine reboots, and if so you might have clues in dmesg after > > reboot. > > > > -ml > > > > > Hi, > with the current version and disabling radeondrm at boot, the resume works. > Without disabling anything the resume doesn't work. > The keyboard looks not responding, but the keys to change the lights > in the display are working
Not sure I understand. You say "...the resume works" but then say a bunch of stuff "doesn't work". Which is it? -ml > (Fn+Home or Fn+End), but no any response when I press Caps Lock, or I try to > reboot. > Disabling the radeondrm in the dmesg the keyboard is using wsdisplay0: > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > with the radeondrm there is not wsdisplay0: > wskbd0 at pckbd0: console keyboard > I don't know if this is normal or not. > > The dmesg with radeondrm disabled: > OpenBSD 5.6-current (GENERIC) #503: Wed Nov 12 00:43:00 MST 2014 > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Intel(R) Pentium(R) M processor 1400MHz ("GenuineIntel" 686-class) > 1.40 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,EST,TM2,PERF > real mem = 1341026304 (1278MB) > avail mem = 1306824704 (1246MB) > User Kernel Config > UKC> disable radeondrm > 247 radeondrm* disabled > UKC> exit > Continuing... > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 09/22/05, BIOS32 rev. 0 @ 0xfd750, > SMBIOS rev. 2.33 @ 0xe0010 (57 entries) > bios0: vendor IBM version "1QET97WW (3.02 )" date 09/22/2005 > bios0: IBM 2672C2G > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SSDT ECDT TCPA BOOT > acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) PCI0(S3) PCI1(S4) DOCK(S4) > USB0(S3) USB1(S3) AC9M(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpiec0 at acpi0 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (AGP_) > acpiprt2 at acpi0: bus 2 (PCI1) > acpiprt3 at acpi0: bus -1 (DOCK) > acpicpu0 at acpi0: C3, C2, C1, PSS > acpipwrres0 at acpi0: PUBS, resource for USB0, USB1, USB7 > acpitz0 at acpi0: critical temperature is 91 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > acpibat0 at acpi0: BAT0 model "IBM-COMPATIBLE" serial 21 type LION oem > "SANYO" > acpibat1 at acpi0: BAT1 not present > acpibat2 at acpi0: BAT2 not present > acpiac0 at acpi0: AC unit online > acpithinkpad0 at acpi0 > acpidock0 at acpi0: GDCK not docked (0) > bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000 > 0xdc000/0x4000! 0xe0000/0x10000 > cpu0 at mainbus0: (uniprocessor) > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: Enhanced SpeedStep 1399 MHz: speeds: 1400, 1200, 1000, 800, 600 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03 > intelagp0 at pchb0 > agp0 at intelagp0: aperture at 0xd0000000, size 0x10000000 > ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11 > uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11 > uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11 > ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81 > pci2 at ppb1 bus 2 > 2:0:0: mem address conflict 0xb0000000/0x1000 > 2:0:1: mem address conflict 0xb1000000/0x1000 > cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xaa: irq 11 > cbb1 at pci2 dev 0 function 1 "Ricoh 5C476 CardBus" rev 0xaa: irq 11 > "Ricoh 5C552 Firewire" rev 0x02 at pci2 dev 0 function 2 not configured > fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x81, i82562: irq 11, > address 00:0d:60:78:16:30 > inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0 > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0 > pcmcia0 at cardslot0 > cardslot1 at cbb1 slot 1 flags 0 > cardbus1 at cardslot1: bus 6 device 0 cacheline 0x0, lattimer 0xb0 > pcmcia1 at cardslot1 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01 > pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, > channel 0 configured to compatibility, channel 1 configured to compatibility > wd0 at pciide0 channel 0 drive 0: <IC25N040ATCS04-0> > wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 > pciide0: channel 1 disabled (no drives) > ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC2700CL2.5 > spdmem1 at iic0 addr 0x51: 256MB DDR SDRAM non-parity PC2300CL2.5 > auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4 > AC97 > ac97: codec id 0x41445374 (Analog Devices AD1981B) > ac97: codec features headphone, 20 bit DAC, No 3D Stereo > audio0 at auich0 > "Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on wd0a (1dcf21e6005b3dc1.a) swap on wd0b dump on wd0b > > The dmesg without disabling anything: > > OpenBSD 5.6-current (GENERIC) #503: Wed Nov 12 00:43:00 MST 2014 > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Intel(R) Pentium(R) M processor 1400MHz ("GenuineIntel" 686-class) > 1.40 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,EST,TM2,PERF > real mem = 1341026304 (1278MB) > avail mem = 1306824704 (1246MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 09/22/05, BIOS32 rev. 0 @ 0xfd750, > SMBIOS rev. 2.33 @ 0xe0010 (57 entries) > bios0: vendor IBM version "1QET97WW (3.02 )" date 09/22/2005 > bios0: IBM 2672C2G > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SSDT ECDT TCPA BOOT > acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) PCI0(S3) PCI1(S4) DOCK(S4) > USB0(S3) USB1(S3) AC9M(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpiec0 at acpi0 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (AGP_) > acpiprt2 at acpi0: bus 2 (PCI1) > acpiprt3 at acpi0: bus -1 (DOCK) > acpicpu0 at acpi0: C3, C2, C1, PSS > acpipwrres0 at acpi0: PUBS, resource for USB0, USB1, USB7 > acpitz0 at acpi0: critical temperature is 91 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > acpibat0 at acpi0: BAT0 model "IBM-COMPATIBLE" serial 21 type LION oem > "SANYO" > acpibat1 at acpi0: BAT1 not present > acpibat2 at acpi0: BAT2 not present > acpiac0 at acpi0: AC unit online > acpithinkpad0 at acpi0 > acpidock0 at acpi0: GDCK not docked (0) > bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000 > 0xdc000/0x4000! 0xe0000/0x10000 > cpu0 at mainbus0: (uniprocessor) > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: Enhanced SpeedStep 1399 MHz: speeds: 1400, 1200, 1000, 800, 600 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03 > intelagp0 at pchb0 > agp0 at intelagp0: aperture at 0xd0000000, size 0x10000000 > ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03 > pci1 at ppb0 bus 1 > radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M6" rev 0x00 > drm0 at radeondrm0 > radeondrm0: irq 11 > uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11 > uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11 > uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11 > ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81 > pci2 at ppb1 bus 2 > 2:0:0: mem address conflict 0xb0000000/0x1000 > 2:0:1: mem address conflict 0xb1000000/0x1000 > cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xaa: irq 11 > cbb1 at pci2 dev 0 function 1 "Ricoh 5C476 CardBus" rev 0xaa: irq 11 > "Ricoh 5C552 Firewire" rev 0x02 at pci2 dev 0 function 2 not configured > fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x81, i82562: irq 11, > address 00:0d:60:78:16:30 > inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0 > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0 > pcmcia0 at cardslot0 > cardslot1 at cbb1 slot 1 flags 0 > cardbus1 at cardslot1: bus 6 device 0 cacheline 0x0, lattimer 0xb0 > pcmcia1 at cardslot1 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01 > pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, > channel 0 configured to compatibility, channel 1 configured to compatibility > wd0 at pciide0 channel 0 drive 0: <IC25N040ATCS04-0> > wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 > pciide0: channel 1 disabled (no drives) > ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC2700CL2.5 > spdmem1 at iic0 addr 0x51: 256MB DDR SDRAM non-parity PC2300CL2.5 > auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4 > AC97 > ac97: codec id 0x41445374 (Analog Devices AD1981B) > ac97: codec features headphone, 20 bit DAC, No 3D Stereo > audio0 at auich0 > "Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on wd0a (1dcf21e6005b3dc1.a) swap on wd0b dump on wd0b > drm: initializing kernel modesetting (RV100 0x1002:0x4C59 0x1014:0x052F). > radeondrm0: GTT: 256M 0xD0000000 - 0xDFFFFFFF > radeondrm0: VRAM: 128M 0x00000000E0000000 - 0x00000000E7FFFFFF (16M used) > drm: Panel ID String: 1024x768 > drm: Panel Size 1024x768 > radeondrm0: 1024x768 > wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > Thanks, > Antonio