Just asking for a sanity check. I tried installing 5.6 from CD on a
WD1600AAJS HDD and was presented with "Available disks are: none." This
seems to be a fairly mainstream drive around for several years (mine being
manufactured in 2010), so I just want to check whether I've missed some
critical install instruction. I followed section 4.5 of the FAQ and
accepted default settings and used entire disk.
The same install disk has been used without incident on other installations
and a different OS was installed on the HDD after the attempt chronicled
above.
Your suggestions/advice are appreciated. dmesg to follow:
------------------------
OpenBSD 5.6 (RAMDISK_CD) #303: Fri Aug 8 00:25:26 MDT 2014
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 8401186816 (8011MB)
avail mem = 8172158976 (7793MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf0450 (82 entries)
bios0: vendor Dell Inc. version "A03" date 02/13/2010
bios0: Dell Inc. OptiPlex 780
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET ____ SLIC
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2992.90 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: apic clock running at 332MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpiprt0 at acpi0: bus 4 (PCI4)
acpiprt1 at acpi0: bus 2 (PCI2)
acpiprt2 at acpi0: bus 3 (PCI3)
acpiprt3 at acpi0: bus 1 (PCI1)
acpiprt4 at acpi0: bus -1 (PCI5)
acpiprt5 at acpi0: bus -1 (PCI6)
acpiprt6 at acpi0: bus 0 (PCI0)
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Q45 Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel Q45 PCIE" rev 0x03: msi
pci1 at ppb0 bus 1
vga1 at pci0 dev 2 function 0 "Intel Q45 Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel Q45 Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel Q45 HECI" rev 0x03 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel Q45 PT IDER" rev 0x03: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 8 int 18 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel Q45 KT" rev 0x03 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH10 D BM LM" rev 0x02: msi, address
b8:ac:6f:a4:35:01
uhci0 at pci0 dev 26 function 0 "Intel 82801JD USB" rev 0x02: apic 8 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801JD USB" rev 0x02: apic 8 int 17
uhci2 at pci0 dev 26 function 2 "Intel 82801JD USB" rev 0x02: apic 8 int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801JD USB" rev 0x02: apic 8 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel 82801JD HD Audio" rev 0x02 at pci0 dev 27 function 0 not configured
ppb1 at pci0 dev 28 function 0 "Intel 82801JD PCIE" rev 0x02: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801JD PCIE" rev 0x02: msi
pci3 at ppb2 bus 3
uhci3 at pci0 dev 29 function 0 "Intel 82801JD USB" rev 0x02: apic 8 int 23
uhci4 at pci0 dev 29 function 1 "Intel 82801JD USB" rev 0x02: apic 8 int 17
uhci5 at pci0 dev 29 function 2 "Intel 82801JD USB" rev 0x02: apic 8 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801JD USB" rev 0x02: apic 8 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa2
pci4 at ppb3 bus 4
"Intel 82801JDO LPC" rev 0x02 at pci0 dev 31 function 0 not configured
pciide1 at pci0 dev 31 function 2 "Intel 82801H RAID" rev 0x02: DMA, channel
0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 8 int 18 for native-PCI interrupt
"Intel 82801JD SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Razer Razer BlackWidow
Refresh Tournament Edition" rev 2.00/2.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 1 "Razer Razer BlackWidow
Refresh Tournament Edition" rev 2.00/2.00 addr 2
uhidev1: iclass 3/0, 5 report ids
ukbd1 at uhidev1 reportid 1
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhid at uhidev1 reportid 2 not configured
uhid at uhidev1 reportid 3 not configured
uhid at uhidev1 reportid 4 not configured
uhid at uhidev1 reportid 5 not configured
uhidev2 at uhub2 port 2 configuration 1 interface 2 "Razer Razer BlackWidow
Refresh Tournament Edition" rev 2.00/2.00 addr 2
uhidev2: iclass 3/0
uhid at uhidev2 not configured
uhidev3 at uhub3 port 2 configuration 1 interface 0 "Logitech USB Receiver"
rev 2.00/22.01 addr 2
uhidev3: iclass 3/1
uhid at uhidev3 not configured
uhidev4 at uhub3 port 2 configuration 1 interface 1 "Logitech USB Receiver"
rev 2.00/22.01 addr 2
uhidev4: iclass 3/0, 17 report ids
uhid at uhidev4 reportid 3 not configured
uhid at uhidev4 reportid 16 not configured
uhid at uhidev4 reportid 17 not configured
softraid0 at root
scsibus0 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
