OpenBSD 5.6-current (RAMDISK_CD) #573: Sun Dec 14 20:08:49 MST 2014
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
An initial interactive install was succesful. A next autonstall using
bsd,rd gave a
"Cannot determine prefetch area" after selecting the sets.
(Complete dmesg and install.conf will follow)
===
Let's install the sets!
Location of sets? (disk http or 'done') [http] http
HTTP proxy URL? (e.g. 'http://proxy:8080', or 'none') [none] none
(Unable to get list from ftp.openbsd.org, but that is OK)
HTTP Server? (hostname or 'done') hercules.utp.xnet
Server directory? [pub/OpenBSD/snapshots/i386] snapshots/i386
Select sets by entering a set name, a file name pattern or 'all'. De-select
sets by prepending a '-' to the set name, file name pattern or 'all'.
Selected
sets are labelled '[X]'.
[X] bsd [X] base56.tgz [X] xbase56.tgz [X] xserv56.tgz
[X] bsd.rd [X] comp56.tgz [X] xshare56.tgz [ ] site56.tgz
[ ] bsd.mp [X] man56.tgz [X] xfont56.tgz
Set name(s)? (or 'abort' or 'done') [done] -all bsd bsd.rd bsd.mp
base56.tgz site56.tgz done
Cannot determine prefetch area. Continue without verification? [no] no
failed; check /ai.log
===
Note that all sets were specified in a single reply in the install.conf
here.
A retry with only listing a single set for each prompt, gave the same error:
===Select sets by entering a set name, a file name pattern or 'all'.
De-select
sets by prepending a '-' to the set name, file name pattern or 'all'.
Selected
sets are labelled '[X]'.
[X] bsd [X] base56.tgz [X] xbase56.tgz [X] xserv56.tgz
[X] bsd.rd [X] comp56.tgz [X] xshare56.tgz [ ] site56.tgz
[ ] bsd.mp [X] man56.tgz [X] xfont56.tgz
Set name(s)? (or 'abort' or 'done') [done] -all
[ ] bsd [ ] base56.tgz [ ] xbase56.tgz [ ] xserv56.tgz
[ ] bsd.rd [ ] comp56.tgz [ ] xshare56.tgz [ ] site56.tgz
[ ] bsd.mp [ ] man56.tgz [ ] xfont56.tgz
Set name(s)? (or 'abort' or 'done') [done] bsd
[X] bsd [ ] base56.tgz [ ] xbase56.tgz [ ] xserv56.tgz
[ ] bsd.rd [ ] comp56.tgz [ ] xshare56.tgz [ ] site56.tgz
[ ] bsd.mp [ ] man56.tgz [ ] xfont56.tgz
Set name(s)? (or 'abort' or 'done') [done] bsd.rd
[X] bsd [ ] base56.tgz [ ] xbase56.tgz [ ] xserv56.tgz
[X] bsd.rd [ ] comp56.tgz [ ] xshare56.tgz [ ] site56.tgz
[ ] bsd.mp [ ] man56.tgz [ ] xfont56.tgz
Set name(s)? (or 'abort' or 'done') [done] bsd.mp
[X] bsd [ ] base56.tgz [ ] xbase56.tgz [ ] xserv56.tgz
[X] bsd.rd [ ] comp56.tgz [ ] xshare56.tgz [ ] site56.tgz
[X] bsd.mp [ ] man56.tgz [ ] xfont56.tgz
Set name(s)? (or 'abort' or 'done') [done] base56.tgz
[X] bsd [X] base56.tgz [ ] xbase56.tgz [ ] xserv56.tgz
[X] bsd.rd [ ] comp56.tgz [ ] xshare56.tgz [ ] site56.tgz
[X] bsd.mp [ ] man56.tgz [ ] xfont56.tgz
Set name(s)? (or 'abort' or 'done') [done] site56.tgz
[X] bsd [X] base56.tgz [ ] xbase56.tgz [ ] xserv56.tgz
[X] bsd.rd [ ] comp56.tgz [ ] xshare56.tgz [X] site56.tgz
[X] bsd.mp [ ] man56.tgz [ ] xfont56.tgz
Set name(s)? (or 'abort' or 'done') [done] done
Cannot determine prefetch area. Continue without verification? [no] no
failed; check /ai.log
The install.conf for this retry:
===Terminal type? = vt220
System hostname = andromache
Which network interface do you wish to configure? = xl0
IPv4 address for = 192.168.222.188
Netmask for = 255.255.255.0
IPv6 address for = none
Which network interface do you wish to configure? = done
Default IPv4 route? = 192.168.222.10
DNS domain name? = utp.xnet
DNS nameservers? = 192.168.222.10
Password for root account? = dfsdfsdfdf
Public ssh key for root account? = ecdsa-sha2-nistp256
AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBCMPEpNB1XOPiaIcv2NJhG1c5Os595IebooZdnloA0OT+npTyk9FQbysijlFq+GWyc7Wu27qaELlhikj//qAyGc=
adri...@hercules.utp.xnet
Start sshd(8) by default? = yes
Start ntpd(8) by default? = yes
NTP server? = default
Do you expect to run the X Window System? = no
Do you want the X Window System to be started by xdm(1)? = no
Do you want to suspend on lid close? = no
Change the default console to com0? = yes
Which speed should com0 use? = 19200
What timezone are you in? = Europe/Amsterdam
Setup a user? = no
Which disk is the root disk? = sd0
Use DUIDs rather than device names in fstab? = yes
Use (W)hole disk or (E)dit the MBR? = W
Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? = a
Which disk do you wish to initialize? = done
Location of sets? = http
HTTP proxy URL? = none
HTTP Server? = hercules.utp.xnet
Server directory? = snapshots/i386
Set name(s)? = -all
Set name(s)? = bsd
Set name(s)? = bsd.rd
Set name(s)? = bsd.mp
Set name(s)? = base56.tgz
Set name(s)? = site56.tgz
Set name(s)? = done
Checksum test for site56.tgz failed. Continue anyway? = yes
Unverified sets: site56.tgz. Continue without verification? = yes
Checksum test for site56-andromache.tgz failed. Continue anyway? = yes
Unverified sets: site56-andromache.tgz. Continue without verification? =
yes
Location of sets? = done
===
The dmesg of the bsd.rd install kernel:
===
>> OpenBSD/i386 BOOT 3.26
>> OpenBSD/i386 BOOT 3.26
addr 0x0
howto
device hd0a
tty com0
image /bsd.rd
timeout 5
db_console unset
boot>
booting hd0a:/bsd.rd: 6461096+422116 [72+240048+229877]=0x703518
entry point at 0x200120
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2014 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 5.6-current (RAMDISK_CD) #573: Sun Dec 14 20:08:49 MST 2014
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 335 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,PERF
real mem = 402190336 (383MB)
avail mem = 387948544 (369MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/04/98, BIOS32 rev. 0 @ 0xfb2d0
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb74c
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdd40/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 10 11 12
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Rage Pro" rev 0x5c
vga1: aperture needed
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MPC3032AT>
wd0: 16-sector PIO, LBA, 3093MB, 6335280 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 10
"Intel 82371AB Power" rev 0x02 at pci0 dev 7 function 3 not configured
fxp0 at pci0 dev 12 function 0 "Intel 8255x" rev 0x05, i82558: irq 12,
address 00:08:c7:49:e4:c0
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
xl0 at pci0 dev 14 function 0 "3Com 3c905B 100Base-TX" rev 0x24: irq 11,
address 00:10:4b:cd:24:ea
exphy0 at xl0 phy 24: 3Com internal media interface
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
softraid0 at root
scsibus0 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/i386 5.6 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? A
Available network interfaces are: fxp0 xl0.
Which network interface should be used for the initial DHCP request? (or
'done') [fxp0] xl0
DHCPDISCOVER on xl0 - interval 3
DHCPOFFER from 192.168.222.10 (00:08:c7:05:ca:0b)
DHCPREQUEST on xl0 to 255.255.255.255
DHCPACK from 192.168.222.10 (00:08:c7:05:ca:0b)
bound to 192.168.222.243 -- renewal in 43200 seconds.
Could not determine auto mode.
Response file location? [http://192.168.222.10/install.conf]
http://192.168.222.20/install.conf
Fetching http://192.168.222.20/install.conf
Performing non-interactive install...
Terminal type? [vt220] vt220
System hostname? (short form, e.g. 'foo') andromache
====
Adriaan
