On Fri, Oct 10, 2014 at 6:23 AM, Mark Patruck <m...@wrapped.cx> wrote:
> I'm running 5.6-current on a Alix 2c3. The box is connected
> via pppoe(4) and VDSL 50Mbit down/10Mbit up - max-mss is set
> to 1440.
>
> Running a few speed tests, i get almost always > 50.000kbit/s
> down, but not more than 400-600kbit/s up.
>
I just found this message looking for something else but it reminded me of
something I found with my ALIX recently: for some reason it had
autonegotiated with the (dlink) switch as half-duplex while the switch
thought it was full. Nailing the speed to 100/full in the hostname.vr?
files resulted in the speed going back up to what I expected (about 85
mbit/s). If you are still having problems you might want to check that out.
--
Darren Tucker (dtucker at zip.com.au)
GPG key 8FF4FA69 / D9A3 86E9 7EEE AF4B B2D4 37C9 C982 80C7 8FF4 FA69
Good judgement comes with experience. Unfortunately, the experience
usually comes from bad judgement.
