Hello, frankenstein warning: stable.mtier.org, all patches applied
the mail server in question doesn't deliver to a certain destination ("Network error on destination MXs"). Other destinations work. When I connect manually I can send messages via the destination server. But no TLS involved this way. SMTP greeting of destination server: $ nc 216.55.105.124 25 220 mobile-systems.at ESMTP Sendmail 8.14.5/8.13.4; Mon, 30 Mar 2015 13:12:39 +0200 (CEST) log entries on originating server: Mar 30 13:11:18 frax smtpd[28031]: smtp-out: Connecting to smtp+tls://216.55.105.124:25 (216.55.105.124.hera.net) on session 23d6e647b646bf14... Mar 30 13:11:18 frax smtpd[28031]: smtp-out: Connected on session 23d6e647b646bf14 Mar 30 13:11:24 frax smtpd[28031]: smtp-out: Error on session 23d6e647b646bf14: IO Error: error:1408D06E:SSL routines:SSL3_GET_KEY_EXCHANGE:bad dh p length Mar 30 13:11:24 frax smtpd[28031]: smtp-out: Disabling route [] <-> 216.55.105.124 (216.55.105.124.hera.net) for 800s Mar 30 13:11:24 frax smtpd[28031]: smtp-out: No valid route for [connector:[]->[relay:yyy.at,heloname=mail.xxx.at],0x0] Mar 30 13:11:24 frax smtpd[28031]: smtp-out: No valid route for [connector:[]->[relay:yyy.at,heloname=mail.xxx.at],0x0] I guess it's about the line: Error on session 23d6e647b646bf14: IO Error: error:1408D06E:SSL routines:SSL3_GET_KEY_EXCHANGE:bad dh p length Any hints on what's going wrong here? Any hints on how to solve or work around? Thanks in advance, Marcus P.S.: is m...@opensmtpd.org dead? https://www.opensmtpd.org/list.html does not say so, but upon sending to the list it I got a "not subscribed" warning message to my subscription address (checked the address with old subscribtion notification). OpenBSD 5.6 (GENERIC.MP) #5: Thu Dec 11 09:51:08 CET 2014 r...@stable-56-amd64.mtier.org:/binpatchng/work-binpatch56-amd64/src/sys/arch/amd64/compile/GENERIC.MP real mem = 4276822016 (4078MB) avail mem = 4154187776 (3961MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xcff9c000 (46 entries) bios0: vendor Dell Inc. version "1.4.3" date 06/05/2009 bios0: Dell Inc. PowerEdge R200 acpi0 at bios0: rev 2 acpi0: sleep states S0 S4 S5 acpi0: tables DSDT FACP APIC SPCR HPET MCFG WDAT SLIC ERST HEST BERT EINJ SSDT SSDT SSDT acpi0: wakeup devices PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz, 1600.30 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF cpu0: 3MB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 266MHz cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz, 1600.06 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF cpu1: 3MB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 ioapic1 at mainbus0: apid 3 pa 0xfec10000, version 20, 24 pins ioapic1: misconfigured as apic 0, remapped to apid 3 acpihpet0 at acpi0: 14318179 Hz acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PEX1) acpiprt2 at acpi0: bus 2 (SBE0) acpiprt3 at acpi0: bus 3 (PXHA) acpiprt4 at acpi0: bus 4 (SBE4) acpiprt5 at acpi0: bus 5 (SBE5) acpiprt6 at acpi0: bus 6 (COMP) acpicpu0 at acpi0: PSS acpicpu1 at acpi0: PSS ipmi at mainbus0 not configured cpu0: Enhanced SpeedStep 1600 MHz: speeds: 2667, 2400, 2133, 1867, 1600 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 3200/3210 Host" rev 0x01 ppb0 at pci0 dev 1 function 0 "Intel 3200/3210 PCIE" rev 0x01: msi pci1 at ppb0 bus 1 mpi0 at pci1 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x08: msi mpi0: SAS6IR, firmware 0.25.47.0 scsibus1 at mpi0: 112 targets sd0 at scsibus1 targ 0 lun 0: <Dell, VIRTUAL DISK, 1028> SCSI3 0/direct fixed naa.600508e0000000006e54a90066b37109 sd0: 152064MB, 512 bytes/sector, 311427072 sectors ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02 pci2 at ppb1 bus 2 ppb2 at pci2 dev 0 function 0 "Intel 6702PXH PCIE-PCIX" rev 0x09 pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02 pci4 at ppb3 bus 4 bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1 (0x4201): msi, address 00:25:64:3b:e9:34 brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb4 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02 pci5 at ppb4 bus 5 bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1 (0x4201): msi, address 00:25:64:3b:e9:35 brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 uhci0 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 21 uhci1 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 20 uhci2 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 21 ehci0 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 21 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 pci6 at ppb5 bus 6 radeondrm0 at pci6 dev 5 function 0 "ATI ES1000" rev 0x02 drm0 at radeondrm0 radeondrm0: apic 2 int 19 pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02 pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 2 int 23 for native-PCI interrupt atapiscsi0 at pciide0 channel 0 drive 1 scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: <TSSTcorp, CDRWDVD TS-L463A, D550> ATAPI 5/cdrom removable cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 uhub4 at uhub0 port 5 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 2 uhidev0 at uhub2 port 2 configuration 1 interface 0 "Tangtop USB CAT5" rev 1.10/0.01 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 uhidev1 at uhub2 port 2 configuration 1 interface 1 "Tangtop USB CAT5" rev 1.10/0.01 addr 2 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on sd0a (4bc519b678dfdbe1.a) swap on sd0b dump on sd0b drm: initializing kernel modesetting (RV100 0x1002:0x515E 0x1028:0x023C). radeondrm0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (32M used) radeondrm0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF drm: PCI GART of 512M enabled (table at 0x0000000008CF9000). radeondrm0: 1024x768 wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 wskbd1: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation)