I'm really sorry to provide a generic overheating response
(I don't have a particular piece of hardware to test against),
but make sure that you have latest BIOS.
I had similar with E530 (?) and it was the middleware problem,
not software.
OpenBSD is known for being pedantic in complying to all sorts
of standards while Lenovo developers are known to be slacking
on it, hoping driver authors to figure out solutions for special
cases themselves.
Again, sorry for generic response, hopefully people with this
hardware will respond soon enough. :)
On Tue, Apr 14, 2015 at 11:41 PM, frantisek holop <min...@obiit.org> wrote:
> hello,
>
> i have hinted about this issue before, but it is
> becoming something that quite bothers me, so i
> thought i might ask for help.
>
> i have a thinkpad x60s. after resuming from lidsuspend,
> for no apparent reason the temperature keeps hanging
> around 70-71. if i make a reboot, it will go back to 55.
>
> not all resumings result in this higher temperature,
> but once it happens, it seems to keep this "state"
> after multiple lidsuspends, again, until reboot.
>
> any ideas how to track this down?
> no rogue interrupts, no high cpu usage...
>
>
> 2 users Load 1.25 1.16 1.14 (1-25 of 31) Tue Apr 14 22:32:59
> 2015
>
> SENSOR VALUE STATUS DESCRIPTION
> acpitz0.temp0 54.00 degC zone
> temperature
> acpitz1.temp0 72.00 degC zone
> temperature
> acpibtn0.indicator0 On lid open
> acpibat0.volt0 14.40 V DC voltage
> acpibat0.volt1 16.43 V DC current
> voltage
> acpibat0.power0 0.00 W rate
> acpibat0.watthour0 21.75 Wh last full
> capacity
> acpibat0.watthour1 1.09 Wh warning
> capacity
> acpibat0.watthour2 0.20 Wh low capacity
> acpibat0.watthour3 20.91 Wh OK remaining
> capacity
> acpibat0.watthour4 28.80 Wh design
> capacity
> acpibat0.raw0 0 raw OK battery idle
> acpiac0.indicator0 On power supply
> acpithinkpad0.temp0 54.00 degC
> acpithinkpad0.temp1 44.00 degC
> acpithinkpad0.temp3 51.00 degC
> acpithinkpad0.temp4 32.00 degC
> acpithinkpad0.temp6 31.00 degC
> acpithinkpad0.fan0 3090 RPM
> acpidock0.indicator0 Off unknown not docked
> cpu0.temp0 72.00 degC
> aps0.temp0 44.00 degC
> aps0.temp1 44.00 degC
> aps0.indicator0 Off Keyboard
> Active
> aps0.indicator1 Off Mouse Active
> aps0.indicator2 On Lid Open
> aps0.raw0 465 raw X_ACCEL
> aps0.raw1 512 raw Y_ACCEL
> aps0.raw2 465 raw X_VAR
> aps0.raw3 512 raw Y_VAR
> softraid0.drive0 online OK sd1
>
>
> load averages: 1.51, 1.27, 1.18
> 61 processes: 1 running, 58 idle, 2 on processor
> CPU0 states: 0.0% user, 0.0% nice, 0.2% system, 0.0% interrupt, 99.8%
> idle
> CPU1 states: 3.8% user, 0.0% nice, 2.2% system, 0.0% interrupt, 94.0%
> idle
> Memory: Real: 341M/865M act/tot Free: 1129M Cache: 365M Swap: 0K/2252M
>
> PID USERNAME PRI NICE SIZE RES STATE WAIT TIME CPU COMMAND
> 29231 _x11 2 0 15M 25M sleep select 5:30 4.64% Xorg
> 22368 f 2 0 246M 263M run poll 10:48 0.78% firefox
> 13203 f 2 0 2488K 3556K sleep kqread 1:41 0.63% tmux
> 24019 _sndio 2 -20 440K 956K idle poll 2:33 0.00% sndiod
> 10611 f 2 0 3620K 13M sleep poll 1:16 0.00% gkrellm
> ...
>
>
> $ vmstat -i
> interrupt total rate
> irq0/clock 4465583 199
> irq0/ipi 8587915 384
> irq130/acpi0 4474 0
> irq81/inteldrm0 1889 0
> irq160/azalia0 1437612 64
> irq85/ppb0 1 0
> irq83/uhci2 1 0
> irq84/uhci3 46 0
> irq84/ehci0 911663 40
> irq80/ahci0 1419214 63
> irq129/pckbc0 22 0
> irq131/pckbc0 92 0
> Total 16828512 753
>
>
>
> OpenBSD 5.7-current (GENERIC.MP) #798: Sun Apr 12 01:37:34 MDT 2015
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Core(TM) Duo CPU L2400 @ 1.66GHz ("GenuineIntel" 686-class)
> 1.67 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF
> real mem = 2137341952 (2038MB)
> avail mem = 2090119168 (1993MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: date 03/31/11, BIOS32 rev. 0 @ 0xfd690, SMBIOS rev. 2.4
> @ 0xe0010 (67 entries)
> bios0: vendor LENOVO version "7BETD8WW (2.19 )" date 03/31/2011
> bios0: LENOVO 1705CTO
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT SSDT
> SSDT SSDT
> acpi0: wakeup devices LID_(S3) SLPB(S3) DURT(S3) EXP0(S4) EXP1(S4)
> EXP2(S4) EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB7(S3) HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiec0 at acpi0
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 166MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) Duo CPU L2400 @ 1.66GHz ("GenuineIntel" 686-class)
> 1.67 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 2, remapped to apid 1
> acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (AGP_)
> acpiprt2 at acpi0: bus 2 (EXP0)
> acpiprt3 at acpi0: bus 3 (EXP1)
> acpiprt4 at acpi0: bus 4 (EXP2)
> acpiprt5 at acpi0: bus 12 (EXP3)
> acpiprt6 at acpi0: bus 21 (PCI1)
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpicpu1 at acpi0: C3, C2, C1, PSS
> acpipwrres0 at acpi0: PUBS, resource for USB0, USB2, USB7
> acpitz0 at acpi0: critical temperature is 127 degC
> acpitz1 at acpi0: critical temperature is 97 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 model "42T4629" serial 327 type LION oem "SANYO"
> acpibat1 at acpi0: BAT1 not present
> acpibat2 at acpi0: BAT2 not present
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> acpidock0 at acpi0: GDCK not docked (0)
> bios0: ROM list: 0xc0000/0xea00! 0xcf000/0x1000 0xd0000/0x1000
> 0xdc000/0x4000! 0xe0000/0x10000!
> cpu0: Enhanced SpeedStep 1663 MHz: speeds: 1667, 1333, 1000 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> inteldrm0 at vga1
> drm0 at inteldrm0
> inteldrm0: 1024x768
> wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
> azalia0: codecs: Analog Devices AD1981HD, 0x0000/0x0000, using Analog
> Devices AD1981HD
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 20
> pci1 at ppb0 bus 2
> em0 at pci1 dev 0 function 0 "Intel 82573L" rev 0x00: msi, address
> 00:16:d3:b6:19:57
> ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 21
> pci2 at ppb1 bus 3
> ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 22
> pci3 at ppb2 bus 4
> ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 23
> pci4 at ppb3 bus 12
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 16
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 17
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 19
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 19
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> pci5 at ppb4 bus 21
> cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xb4: apic 1 int 16
> "Ricoh 5C552 Firewire" rev 0x09 at pci5 dev 0 function 1 not configured
> sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x18: apic 1 int 18
> sdmmc0 at sdhc0
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0
> pcmcia0 at cardslot0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
> disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
> channel 0 configured to compatibility, channel 1 configured to compatibility
> pciide0: channel 0 disabled (no drives)
> pciide0: channel 1 ignored (disabled)
> ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI
> 1.1
> ahci0: port 0: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA THNSNC12, CJSA> SCSI3 0/direct
> fixed t10.ATA_TOSHIBA_THNSNC128GMMJ_Z05S1020THEZ
> sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1
> int 23
> iic0 at ichiic0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> uhub5 at uhub0 port 5 "Terminus Technology USB 2.0 Hub" rev 2.00/1.11 addr
> 2
> run0 at uhub5 port 1 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 3
> run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address
> 10:6f:3f:ea:87:0c
> uhidev0 at uhub5 port 2 configuration 1 interface 0 "vendor 0x1d57 2.4G
> Receiver" rev 1.10/1.10 addr 4
> uhidev0: iclass 3/1, 4 report ids
> ums0 at uhidev0 reportid 1: 5 buttons, Z dir
> wsmouse1 at ums0 mux 0
> uhid0 at uhidev0 reportid 2: input=1, output=0, feature=0
> uhid1 at uhidev0 reportid 3: input=2, output=0, feature=0
> uhid2 at uhidev0 reportid 4: input=1, output=0, feature=0
> uhidev1 at uhub5 port 2 configuration 1 interface 1 "vendor 0x1d57 2.4G
> Receiver" rev 1.10/1.10 addr 4
> uhidev1: iclass 3/1
> ukbd0 at uhidev1: 8 variable keys, 6 key codes, country code 33
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev2 at uhub5 port 4 configuration 1 interface 0 "Areson USB Device"
> rev 1.10/0.01 addr 5
> uhidev2: iclass 3/1
> ums1 at uhidev2: 5 buttons, Z dir
> wsmouse2 at ums1 mux 0
> uhidev3 at uhub5 port 4 configuration 1 interface 1 "Areson USB Device"
> rev 1.10/0.01 addr 5
> uhidev3: iclass 3/0, 1 report id
> uhid3 at uhidev3 reportid 1: input=7, output=7, feature=0
> ugen0 at uhub4 port 2 "STMicroelectronics Biometric Coprocessor" rev
> 1.00/0.01 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd0a (2a6c0cb2b714a4f0.a) swap on sd0b dump on sd0b
> --
> after two weeks of dieting, all i lost was two weeks.
>
>
--
Fly safe,
Sloz
