another try with XHCI_DEBUG kernel (otherwise vanilla GENERIC.MP),
booted from the usb stick. this gets through the problematic
point, the ports are not disabled.
i am attaching furter info as well:
pcidump -v:
Domain /dev/pci0:
0:0:0: Intel Bay Trail Host
0x0000: Vendor ID: 8086 Product ID: 0f00
0x0004: Command: 0007 Status: 0000
0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 0e
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1025 Product ID: 0860
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0:2:0: Intel Bay Trail Video
0x0000: Vendor ID: 8086 Product ID: 0f31
0x0004: Command: 0007 Status: 0010
0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 0e
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 32bit addr: 0x90000000/0x00400000
0x0014: BAR empty (00000000)
0x0018: BAR mem prefetchable 32bit addr: 0x80000000/0x10000000
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x00002050/0x0008
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1025 Product ID: 0860
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 07 Min Gnt: 00 Max Lat: 00
0x00d0: Capability 0x01: Power Management
0x0090: Capability 0x05: Message Signaled Interrupts (MSI)
0x00b0: Capability 0x09: Vendor Specific
0:19:0: Intel Bay Trail AHCI
0x0000: Vendor ID: 8086 Product ID: 0f23
0x0004: Command: 0007 Status: 02b0
0x0008: Class: 01 Subclass: 06 Interface: 01 Revision: 0e
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR io addr: 0x00002048/0x0008
0x0014: BAR io addr: 0x0000205c/0x0004
0x0018: BAR io addr: 0x00002040/0x0008
0x001c: BAR io addr: 0x00002058/0x0004
0x0020: BAR io addr: 0x00002020/0x0020
0x0024: BAR mem 32bit addr: 0x9091d000/0x00000800
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1025 Product ID: 0860
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0070: Capability 0x01: Power Management
0x00a8: Capability 0x12: SATA
0:20:0: Intel Bay Trail xHCI
0x0000: Vendor ID: 8086 Product ID: 0f35
0x0004: Command: 0006 Status: 0290
0x0008: Class: 0c Subclass: 03 Interface: 30 Revision: 0e
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x0000000090900000/0x00010000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1025 Product ID: 0860
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x0070: Capability 0x01: Power Management
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0:26:0: Intel Bay Trail TXE
0x0000: Vendor ID: 8086 Product ID: 0f18
0x0004: Command: 0106 Status: 0010
0x0008: Class: 10 Subclass: 80 Interface: 00 Revision: 0e
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
0x0010: BAR mem 32bit addr: 0x90800000/0x00100000
0x0014: BAR mem 32bit addr: 0x90700000/0x00100000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1025 Product ID: 0860
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 07 Min Gnt: 00 Max Lat: 00
0x0080: Capability 0x01: Power Management
0x00a0: Capability 0x05: Message Signaled Interrupts (MSI)
0:27:0: Intel Bay Trail HD Audio
0x0000: Vendor ID: 8086 Product ID: 0f04
0x0004: Command: 0006 Status: 0010
0x0008: Class: 04 Subclass: 03 Interface: 00 Revision: 0e
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
0x0010: BAR mem 64bit addr: 0x0000000090910000/0x00004000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1025 Product ID: 0860
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
0x0060: Capability 0x05: Message Signaled Interrupts (MSI)
0:28:0: Intel Bay Trail I2C
0x0000: Vendor ID: 8086 Product ID: 0f48
0x0004: Command: 0003 Status: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 0e
0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 1 Subordinate Bus: 1
Secondary Latency Timer: 00
0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 2000
0x0020: Memory Base: fff0 Memory Limit: 0000
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: ffffffff
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 01 Line: 07 Bridge Control: 0000
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 5.0 GT/s Link Width: x0 / x1
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
0:28:1: Intel Bay Trail PCIE
0x0000: Vendor ID: 8086 Product ID: 0f4a
0x0004: Command: 0007 Status: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 0e
0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 2 Subordinate Bus: 2
Secondary Latency Timer: 00
0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 2000
0x0020: Memory Base: 9060 Memory Limit: 9060
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: ffffffff
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 02 Line: 0b Bridge Control: 0000
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 5.0 GT/s Link Width: x1 / x1
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
0:28:2: Intel Bay Trail PCIE
0x0000: Vendor ID: 8086 Product ID: 0f4c
0x0004: Command: 0007 Status: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 0e
0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 3 Subordinate Bus: 3
Secondary Latency Timer: 00
0x001c: I/O Base: 10 I/O Limit: 10 Secondary Status: 2000
0x0020: Memory Base: 9050 Memory Limit: 9050
0x0024: Prefetch Memory Base: 9041 Prefetch Memory Limit: 9041
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 03 Line: 0b Bridge Control: 0000
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 5.0 GT/s Link Width: x1 / x1
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
0:31:0: Intel Bay Trail LPC
0x0000: Vendor ID: 8086 Product ID: 0f1c
0x0004: Command: 0107 Status: 0210
0x0008: Class: 06 Subclass: 01 Interface: 00 Revision: 0e
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1025 Product ID: 0860
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x00e0: Capability 0x09: Vendor Specific
0:31:3: Intel Bay Trail SMBus
0x0000: Vendor ID: 8086 Product ID: 0f12
0x0004: Command: 0003 Status: 0290
0x0008: Class: 0c Subclass: 05 Interface: 00 Revision: 0e
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 32bit addr: 0x90919000/0x00000020
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x00002000/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1025 Product ID: 0860
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: 0b Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
2:0:0: Atheros AR9462
0x0000: Vendor ID: 168c Product ID: 0034
0x0004: Command: 0007 Status: 0010
0x0008: Class: 02 Subclass: 80 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
0x0010: BAR mem 64bit addr: 0x0000000090600000/0x00080000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 105b Product ID: e052
0x0030: Expansion ROM Base Address: ffff0000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x0040: Capability 0x01: Power Management
0x0050: Capability 0x05: Message Signaled Interrupts (MSI)
0x0070: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x1
3:0:0: Realtek 8168
0x0000: Vendor ID: 10ec Product ID: 8168
0x0004: Command: 0007 Status: 0010
0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 0c
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
0x0010: BAR io addr: 0x00001000/0x0100
0x0014: BAR empty (00000000)
0x0018: BAR mem 64bit addr: 0x0000000090500000/0x00001000
0x0020: BAR mem prefetchable 64bit addr: 0x0000000090400000/0x00004000
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1025 Product ID: 0860
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x0040: Capability 0x01: Power Management
0x0050: Capability 0x05: Message Signaled Interrupts (MSI)
0x0070: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x1
0x00b0: Capability 0x11: Extended Message Signaled Interrupts (MSI-X)
0x00d0: Capability 0x03: Vital Product Data (VPD)
usbdevs -v:
Controller /dev/usb0:
addr 1: super speed, self powered, config 1, xHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 addr 2: high speed, self powered, config 1, USB2.0 Hub(0x0608), Genesys
Logic(0x05e3), rev 85.37
port 1 enabled
port 2 powered
port 3 addr 3: high speed, power 200 mA, config 1, U3 Cruzer Micro(0x5406),
SanDisk Corporation(0x0781), rev 0.10, iSerialNumber 0000185E257028F7
port 4 powered
port 3 powered
port 4 addr 4: high speed, power 500 mA, config 1, HD WebCam(0x2c57),
NC2141102T503020A3LM09(0x1bcf), rev 0.09
port 5 powered
port 6 powered
port 7 powered
sysctl hw:
hw.machine=i386
hw.model=Intel(R) Pentium(R) CPU N3540 @ 2.16GHz ("GenuineIntel" 686-class)
hw.ncpu=4
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=sd0:,sd1:8dee11390a2c5c31
hw.diskcount=2
hw.sensors.acpitz0.temp0=36.00 degC (zone temperature)
hw.sensors.acpiac0.indicator0=Off (power supply)
hw.sensors.acpibat0.volt0=15.20 VDC (voltage)
hw.sensors.acpibat0.volt1=15.88 VDC (current voltage)
hw.sensors.acpibat0.current0=0.44 A (rate)
hw.sensors.acpibat0.amphour0=3.33 Ah (last full capacity)
hw.sensors.acpibat0.amphour1=0.30 Ah (warning capacity)
hw.sensors.acpibat0.amphour2=0.13 Ah (low capacity)
hw.sensors.acpibat0.amphour3=2.54 Ah (remaining capacity), OK
hw.sensors.acpibat0.amphour4=3.22 Ah (design capacity)
hw.sensors.acpibat0.raw0=1 (battery discharging), OK
hw.sensors.acpibtn2.indicator0=On (lid open)
hw.sensors.cpu0.temp0=38.00 degC
hw.cpuspeed=2159
hw.setperf=100
hw.vendor=Acer
hw.product=TravelMate B115-M
hw.version=V1.26
hw.serialno=NXVA1EG002512019CD7600
hw.uuid=aa4bc249-1943-4354-bb50-00e0b8bda7ad
hw.physmem=2027171840
hw.usermem=2026962944
hw.ncpufound=4
hw.allowpowerdown=1
hw.perfpolicy=manual
OpenBSD 5.7-current (GENERIC.MP) #5: Sat May 30 20:18:28 CEST 2015
f...@hatvan.obiit.org:/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Pentium(R) CPU N3540 @ 2.16GHz ("GenuineIntel" 686-class) 2.17
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
real mem = 2027171840 (1933MB)
avail mem = 1979674624 (1887MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 09/12/14, BIOS32 rev. 0 @ 0xef725, SMBIOS rev. 2.7 @
0xe6eb0 (22 entries)
bios0: vendor Insyde Corp. version "V1.26" date 09/12/2014
bios0: Acer TravelMate B115-M
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP UEFI UEFI SSDT HPET LPIT APIC MCFG SSDT SSDT SSDT SSDT
SSDT SSDT CSRT SSDT FPDT
acpi0: wakeup devices XHC1(S3) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4)
RP03(S4) PXSX(S4) RP04(S4) EHC1(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 83MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Pentium(R) CPU N3540 @ 2.16GHz ("GenuineIntel" 686-class) 2.17
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Pentium(R) CPU N3540 @ 2.16GHz ("GenuineIntel" 686-class) 2.17
GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Pentium(R) CPU N3540 @ 2.16GHz ("GenuineIntel" 686-class) 2.17
GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 87 pins
ioapic0: misconfigured as apic 1, remapped to apid 2
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiec0 at acpi0
acpicpu0 at acpi0: C1, PSS
acpicpu1 at acpi0: C1, PSS
acpicpu2 at acpi0: C1, PSS
acpicpu3 at acpi0: C1, PSS
acpipwrres0 at acpi0: PC05, resource for RP01
acpipwrres1 at acpi0: USBC, resource for OTG1, EHC1
acpitz0 at acpi0: critical temperature is 105 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT1 model "AC14B8K" serial 37768 type LION oem "UNKNOWN"
acpibtn2 at acpi0: LID_
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
bios0: ROM list: 0xc0000/0xe400!
cpu0: Enhanced SpeedStep 2167 MHz: speeds: 2159, 2158, 1992, 1826, 1660, 1494,
1328, 1162, 996, 830, 664, 498 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel Bay Trail Host" rev 0x0e
vga1 at pci0 dev 2 function 0 "Intel Bay Trail Video" rev 0x0e
intagp0 at vga1can't get aperture info
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ahci0 at pci0 dev 19 function 0 "Intel Bay Trail AHCI" rev 0x0e: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD5000LPVX-2, 01.0> SCSI3 0/direct
fixed naa.50014ee2b5f5f032
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
xhci0 at pci0 dev 20 function 0 "Intel Bay Trail xHCI" rev 0x0e: msi
xhci0: xHCI version 1.0
xhci0: CAPLENGTH=0x80
xhci0: DOORBELL=0x3000
xhci0: RUNTIME=0x2000
xhci0: 32 bytes context
xhci0: supported page size 0x00000001
xhci0: 7 ports and 32 slots
xhci0: 16 scratch pages
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
xhci0: DCBAAP=00x1f1f4000
xhci0: CRCR=00 (000000001f1f5000)
xhci0: ERSTBA=00x1ec69000
xhci0: ERDP=00x1f1f6000
xhci0: USBCMD=0x5
xhci0: port=2 change=0x04
xhci0: port=4 change=0x10
xhci0: IMAN=0x2
"Intel Bay Trail TXE" rev 0x0e at pci0 dev 26 function 0 not configured
azalia0 at pci0 dev 27 function 0 "Intel Bay Trail HD Audio" rev 0x0e: msi
azalia0: codecs: Realtek/0x0283, Intel/0x2882, using Realtek/0x0283
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel Bay Trail I2C" rev 0x0e: apic 2 int 16
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel Bay Trail PCIE" rev 0x0e: apic 2 int 17
pci2 at ppb1 bus 2
"Atheros AR9462" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 2 "Intel Bay Trail PCIE" rev 0x0e: apic 2 int 18
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G (0x4c00),
msi, address 2c:60:0c:75:fd:4d
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
pcib0 at pci0 dev 31 function 0 "Intel Bay Trail LPC" rev 0x0e
ichiic0 at pci0 dev 31 function 3 "Intel Bay Trail SMBus" rev 0x0e: apic 2 int
18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
xhci0: port=2 change=0x04
xhci0: xhci_cmd_slot_control
xhci0: dev 1, input=0xf53ba000 slot=0xf53ba020 ep0=0xf53ba040
xhci0: dev 1, setting DCBAA to 0x000000001ec54000
xhci_pipe_init: pipe=0xd32a9000 addr=0 depth=1 port=2 speed=3 dev 1 dci 1
(epAddr=0x0)
xhci0: xhci_cmd_set_address BSR=1
xhci0: xhci_cmd_set_address BSR=0
xhci0: dev 1 addr 1
uhub1 at uhub0 port 2 "Genesys Logic USB2.0 Hub" rev 2.00/85.37 addr 2
xhci_pipe_init: pipe=0xd32c7000 addr=2 depth=1 port=2 speed=3 dev 1 dci 3
(epAddr=0x81)
xhci0: xhci_cmd_configure_ep dev 1
xhci0: xhci_cmd_slot_control
xhci0: dev 2, input=0xf53be000 slot=0xf53be020 ep0=0xf53be040
xhci0: dev 2, setting DCBAA to 0x000000001ec58000
xhci_pipe_init: pipe=0xd32c7800 addr=0 depth=2 port=1 speed=2 dev 2 dci 1
(epAddr=0x0)
xhci0: xhci_cmd_set_address BSR=1
xhci0: xhci_cmd_set_address BSR=0
xhci0: dev 2 addr 2
xhci_abort_xfer: xfer=0xd900d120 status=IN_PROGRESS err=TIMEOUT actlen=0 len=2
idx=13
xhci0: xhci_cmd_stop_ep dev 2 dci 1
xhci_event_xfer: stopped xfer=0xd900d120
xhci0: xhci_cmd_set_tr_deq_async dev 2 dci 1
xhci_abort_xfer: xfer=0xd900d120 status=IN_PROGRESS err=TIMEOUT actlen=0 len=9
idx=21
xhci0: xhci_cmd_stop_ep dev 2 dci 1
xhci_event_xfer: stopped xfer=0xd900d120
xhci0: xhci_cmd_set_tr_deq_async dev 2 dci 1
xhci0: xhci_cmd_configure_ep dev 2
xhci0: xhci_cmd_slot_control
uhub1: device problem, disabling port 1
xhci0: xhci_cmd_slot_control
xhci0: dev 3, input=0xf53be000 slot=0xf53be020 ep0=0xf53be040
xhci0: dev 3, setting DCBAA to 0x000000001ec58000
xhci_pipe_init: pipe=0xd32c7800 addr=0 depth=2 port=3 speed=3 dev 3 dci 1
(epAddr=0x0)
xhci0: xhci_cmd_set_address BSR=1
xhci0: xhci_cmd_set_address BSR=0
xhci0: dev 3 addr 3
umass0 at uhub1 port 3 configuration 1 interface 0 "SanDisk Corporation U3
Cruzer Micro" rev 2.00/0.10 addr 3
umass0: using SCSI over Bulk-Only
xhci_pipe_init: pipe=0xd32c8000 addr=3 depth=2 port=3 speed=3 dev 3 dci 2
(epAddr=0x1)
xhci0: xhci_cmd_configure_ep dev 3
xhci_pipe_init: pipe=0xd32c8800 addr=3 depth=2 port=3 speed=3 dev 3 dci 3
(epAddr=0x81)
xhci0: xhci_cmd_configure_ep dev 3
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <SanDisk, U3 Cruzer Micro, 4.05> SCSI2 0/direct
removable serial.07815406185E257028F7
xhci0: xhci_cmd_reset_ep_async dev 3 dci 3
xhci0: xhci_cmd_set_tr_deq_async dev 3 dci 3
sd1: 3919MB, 512 bytes/sector, 8027789 sectors
xhci0: xhci_cmd_reset_ep_async dev 3 dci 3
xhci0: xhci_cmd_set_tr_deq_async dev 3 dci 3
xhci0: xhci_cmd_reset_ep_async dev 3 dci 3
xhci0: xhci_cmd_set_tr_deq_async dev 3 dci 3
xhci0: port=4 change=0x10
xhci0: xhci_cmd_slot_control
xhci0: dev 4, input=0xf53d3000 slot=0xf53d3020 ep0=0xf53d3040
xhci0: dev 4, setting DCBAA to 0x000000001ec5d000
xhci_pipe_init: pipe=0xd32c9000 addr=0 depth=1 port=4 speed=3 dev 4 dci 1
(epAddr=0x0)
xhci0: xhci_cmd_set_address BSR=1
xhci0: xhci_cmd_set_address BSR=0
xhci0: dev 4 addr 4
uvideo0 at uhub0 port 4 configuration 1 interface 0 "NC2141102T503020A3LM09 HD
WebCam" rev 2.00/0.09 addr 4
video0 at uvideo0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
xhci0: xhci_cmd_reset_ep_async dev 3 dci 3
xhci0: xhci_cmd_set_tr_deq_async dev 3 dci 3
xhci0: xhci_cmd_reset_ep_async dev 3 dci 3
xhci0: xhci_cmd_set_tr_deq_async dev 3 dci 3
xhci0: xhci_cmd_reset_ep_async dev 3 dci 3
xhci0: xhci_cmd_set_tr_deq_async dev 3 dci 3
xhci0: xhci_cmd_reset_ep_async dev 3 dci 3
xhci0: xhci_cmd_set_tr_deq_async dev 3 dci 3
root on sd1a (8dee11390a2c5c31.a) swap on sd1b dump on sd1b
xhci0: xhci_cmd_reset_ep_async dev 3 dci 3
xhci0: xhci_cmd_set_tr_deq_async dev 3 dci 3
xhci0: xhci_cmd_reset_ep_async dev 3 dci 3
xhci0: xhci_cmd_set_tr_deq_async dev 3 dci 3
xhci0: xhci_cmd_reset_ep_async dev 3 dci 3
xhci0: xhci_cmd_set_tr_deq_async dev 3 dci 3
xhci0: xhci_cmd_reset_ep_async dev 3 dci 3
xhci0: xhci_cmd_set_tr_deq_async dev 3 dci 3
xhci0: xhci_cmd_reset_ep_async dev 3 dci 3
xhci0: xhci_cmd_set_tr_deq_async dev 3 dci 3
xhci0: xhci_cmd_reset_ep_async dev 3 dci 3
xhci0: xhci_cmd_set_tr_deq_async dev 3 dci 3
--
on a scale of 1 to 10, 4 is about 7.
