Hi misc@!
With the latest version of ~current/amd64 (#1050 as of June 7th, 2015) I
get the following error trying to run pftop (noticed on two different
PCs, one of the dmesgs below):
~ $ sudo pftop
> Error Reading status (DIOCGETSTATUS): Permission denied
Did I miss any significant changes here? Any ideas or should I just
wait for the next update of ~current?
Best,
STEFAN
######################################
OpenBSD 5.7-current (GENERIC.MP) #1050: Sun Jun 7 01:19:03 MDT 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3203203072 (3054MB)
avail mem = 3102314496 (2958MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (68 entries)
bios0: vendor LENOVO version "79ETC9WW (2.09 )" date 12/22/2006
bios0: LENOVO 2007VG2
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT
SSDT SSDT SSDT acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3)
DURT(S3) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) PCI1(S4) USB0(S3) USB1(S3)
USB2(S3) USB7(S3) HDEF(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, 1994.69 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR
cpu0: 4MB 64b/line 16-way L2 cache cpu0: smt 0, core 0, package 0 mtrr:
Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic
clock running at 166MHz cpu0: mwait min=64, max=64,
C-substates=0.2.2.2.2, IBE cpu1 at mainbus0: apid 1 (application
processor) cpu1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, 1994.34 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR
cpu1: 4MB 64b/line 16-way L2 cache cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins ioapic0:
misconfigured as apic 2, remapped to apid 1 acpimcfg0 at acpi0 addr
0xf0000000, bus 0-63 acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus 4 (EXP2)
acpiprt5 at acpi0: bus 12 (EXP3)
acpiprt6 at acpi0: bus 21 (PCI1)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS, resource for USB0, USB2, USB7
acpitz0 at acpi0: critical temperature is 127 degC
acpitz1 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "92P1139" serial 2887 type LION oem
"Panasonic" acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
cpu0: Enhanced SpeedStep 1994 MHz: speeds: 2000, 1667, 1333, 1000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03: msi
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility X1300 M52-64"
rev 0x00 drm0 at radeondrm0
radeondrm0: apic 1 int 16
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Analog Devices AD1981HD, Conexant/0x2bfa, using Analog
Devices AD1981HD audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi
pci2 at ppb1 bus 2
em0 at pci2 dev 0 function 0 "Intel 82573L" rev 0x00: msi, address
00:15:58:81:15:fb ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE"
rev 0x02: msi pci3 at ppb2 bus 3
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
msi, MoW2, address 00:19:d2:85:6f:4d ppb3 at pci0 dev 28 function 2
"Intel 82801GB PCIE" rev 0x02: msi pci4 at ppb3 bus 4
xhci0 at pci4 dev 0 function 0 "Renesas uPD720202 xHCI" rev 0x02: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Renesas xHCI root hub" rev 3.00/1.00 addr 1
ppb4 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: msi
pci5 at ppb4 bus 12
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1
int 16 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02:
apic 1 int 17 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev
0x02: apic 1 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB"
rev 0x02: apic 1 int 19 ehci0 at pci0 dev 29 function 7 "Intel 82801GB
USB" rev 0x02: apic 1 int 19 usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci6 at ppb5 bus 21
cbb0 at pci6 dev 0 function 0 "TI PCI1510 CardBus" rev 0x00: apic 1 int
16 cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK6459GSXP>
wd0: 16-sector PIO, LBA48, 610480MB, 1250263728 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide0: channel 1
ignored (disabled) ahci0 at pci0 dev 31 function 2 "Intel 82801GBM
AHCI" rev 0x02: msi, AHCI 1.1 ahci0: port 0: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 840, DXM0> SCSI3
0/direct fixed naa.50025385a020da12 sd0: 488386MB, 512 bytes/sector,
1000215216 sectors, thin ichiic0 at pci0 dev 31 function 3 "Intel
82801GB SMBus" rev 0x02: apic 1 int 23 iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
uhub6 at uhub1 port 1 "Genesys Logic USB2.0 Hub" rev 2.00/9.01 addr 2
uhidev0 at uhub6 port 1 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/12.01 addr 3 uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub6 port 1 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/12.01 addr 3 uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub6 port 1 configuration 1 interface 2 "Logitech USB
Receiver" rev 2.00/12.01 addr 3 uhidev2: iclass 3/0, 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
uhidev3 at uhub6 port 2 configuration 1 interface 0 "Logitech USB-PS/2
Optical Mouse" rev 2.00/11.10 addr 4 uhidev3: iclass 3/1
ums1 at uhidev3: 3 buttons, Z dir
wsmouse3 at ums1 mux 0
umass0 at uhub1 port 5 configuration 1 interface 0 "MediaTek Inc
MT1806" rev 2.00/0.00 addr 5 umass0: using ATAPI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
cd0 at scsibus2 targ 1 lun 0: <TSSTcorp, CDDVDW SE-208DB, TS01> ATAPI
5/cdrom removable serial.0e8d180676GAD2009BB_ vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (84a682c877cee9a9.a) swap on sd0b dump on sd0b
radeondrm0: 1400x1050
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using
wskbd0 wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
