--- Jens Teglhus Mxller <[EMAIL PROTECTED]> wrote:
> On Wed, December 21, 2005 12:06, Reza Muhammad said:
> > Dear All
> >
> > "C Compiler cannot create executable" ?
> > what does it mean ?
> > My system is OpenBSD-3.8 Generic Kernel at Intel
> > Pentium M Proc 1600 Mhz (IBM Think Pad T41)
> >
> > Please help ...
> >
> > regards
> > reza
>
> http://www.openbsd.org/mail.html
>
> /jtm
>
sorry all, i tought there is short answer for my
problem so i didnt attach detailed..
# dmesg
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT
2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1600MHz
("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2
cpu0: Enhanced SpeedStep 1600 MHz (1484 mV): speeds:
1600, 1400, 1200, 1000, 800, 600 MHz
real mem = 535797760 (523240K)
avail mem = 482000896 (470704K)
using 4278 buffers containing 26894336 bytes (26264K)
of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(9c) BIOS, date 10/30/03,
BIOS32 rev. 0 @ 0xfd750
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272
(15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel
82371FB ISA" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000
0xd1000/0x1000 0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PE Hub" rev
0x03
ppb0 at pci0 dev 1 function 0 "Intel 82855PE AGP" rev
0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M7
LW" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100
emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB"
rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB"
rev 0x01: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB"
rev 0x01: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB"
rev 0x01: irq 11
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM
Hub-to-PCI" rev 0x81
pci2 at ppb1 bus 2
cbb0 at pci2 dev 0 function 0 "Texas Instruments
PCI4520 CardBus" rev 0x01: irq 11
cbb1 at pci2 dev 0 function 1 "Texas Instruments
PCI4520 CardBus" rev 0x01: irq 11
em0 at pci2 dev 1 function 0 "Intel PRO/1000MT
(82540EP)" rev 0x03: irq 11, address:
00:0d:60:11:de:9e
ipw0 at pci2 dev 2 function 0 "Intel PRO/Wireless
2100" rev 0x04: irq 11, address 00:04:23:90:fc:6b
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8,
lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8,
lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM
LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE"
rev 0x01: DMA, channel 0 configured to compatibility,
channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N040ATCS05-0>
wd0: 16-sector PIO, LBA, 34797MB, 71265266 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM
SD-R9012, 1121> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801DB SMBus" rev 0x01 at pci0 dev 31 function
3 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97"
rev 0x01: irq 11, ICH4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D
Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function
6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte
fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask efed netmask efed ttymask ffef
pctr: 686-class user-level performance counters
enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
# mount
/dev/wd0a on / type ffs (local)
#cd squid-2.5.STABLE12
# ./configure
loading cache ./config.cache
checking for a BSD compatible install...
/usr/bin/install -c
checking whether build environment is sane... yes
checking for mawk... no
checking for gawk... no
checking for nawk... nawk
checking whether make sets ${MAKE}... yes
checking whether to enable maintainer-specific
portions of Makefiles... no
checking for gcc... gcc
checking whether the C compiler (gcc -g) works... no
configure: error: installation or configuration
problem: C compiler cannot create executables.
#cd /usr/ports/security/bsd-airtools/
# make
===> Building for bsd-airtools-0.2p2
cd
/usr/ports/security/bsd-airtools/w-bsd-airtools-0.2p2/bsd-airtools/dstumbler;
make CC="cc" CFLAGS="-O2 -pipe "
cc -O2 -pipe -o dstumbler main.o misc.o aps.o nodes.o
menu.o wistat.o gps.o mon.o audio.o log.o -lcurses
-lpcap
/usr/bin/ld: cannot find -lgcc
collect2: ld returned 1 exit status
*** Error code 1
Thanks for review, and for info, compiling work on my
3.7 machine.
regards
reza
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
