Hi, I'm experiencing the same issue with today -CURRENT AMD64 using NV driver. If I configure xorg.conf and use the VESA driver I'm able to boot X (not @1920x1080 however - still searching if it's possible using VESA). Has the NV driver become unsupported?
graphic card dmesg info is: vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0659 rev 0xa1 I can supply more information if needed. Regards.â On Tue, Jun 30, 2015 at 9:20 PM, Markus Lude <markus.l...@gmx.de> wrote: > Hello, > > after upgrading to snapshot from june 29th on my sun blade 100 (sparc64) > X fails to start. > > ... > [ 39.465] (II) MACH64: Driver for ATI Mach64 chipsets > [ 39.470] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card > support > [ 39.472] (**) MACH64(0): Depth 24, (--) framebuffer bpp 32 > [ 39.479] (**) MACH64(0): Option "reference_clock" "29.5MHz" > [ 39.479] (==) MACH64(0): Using EXA acceleration architecture > [ 39.481] (EE) Unable to map mmio aperture. Invalid argument (22) > [ 39.481] (WW) MACH64: Mach64 in slot 0:19:0 could not be detected! > [ 39.487] (II) UnloadModule: "mach64" > [ 39.487] (EE) Screen(s) found, but none have a usable configuration. > > snapshot from june 26th/27th worked. > > dmesg, Xorg.0.log and xorg.conf attached below > > sysctl.conf: > machdep.allowaperture=1 > > Regards, > Markus > console is keyboard/display > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2015 OpenBSD. All rights reserved. > http://www.OpenBSD.org > > OpenBSD 5.8-beta (GENERIC) #603: Mon Jun 29 09:07:15 MDT 2015 > dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC > real mem = 536870912 (512MB) > avail mem = 511508480 (487MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root: Sun Blade 100 (UltraSPARC-IIe) > cpu0 at mainbus0: SUNW,UltraSPARC-IIe (rev 1.4) @ 502 MHz > cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 256K external > (64 b/l) > psycho0 at mainbus0: pci108e,a001, impl 0, version 0, ign 7c0 > psycho0: bus range 0-1, PCI bus 0 > psycho0: dvma map c0000000-dfffffff > pci0 at psycho0 > ebus0 at pci0 dev 12 function 0 "Sun RIO EBus" rev 0x01 > "flashprom" at ebus0 addr 0-fffff not configured > clock1 at ebus0 addr 0-1fff: mk48t59 > ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00 > "dma" at ebus1 addr 0-ffff ivec 0x2a not configured > power0 at ebus1 addr 800-82f ivec 0x20 > com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo > com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo > gem0 at pci0 dev 12 function 1 "Sun ERI Ether" rev 0x01: ivec 0x7c6, > address 00:03:ba:18:3a:e9 > ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI > 0x0010dd, model 0x0002 > "Sun FireWire" rev 0x01 at pci0 dev 12 function 2 not configured > ohci0 at pci0 dev 12 function 3 "Sun USB" rev 0x01: ivec 0x7e4, version > 1.0, legacy support > alipm0 at pci0 dev 3 function 0 "Acer Labs M7101 Power" rev 0x00: 223KHz > clock > iic0 at alipm0 > "max1617" at alipm0 addr 0x18 skipped due to alipm0 bugs > "scm001" at alipm0 addr 0x20 skipped due to alipm0 bugs > spdmem0 at iic0 addr 0x50: 512MB SDRAM ECC PC133CL2 > autri0 at pci0 dev 8 function 0 "Acer Labs M5451 Audio" rev 0x01: ivec > 0x7e3 > ac97: codec id 0x41445348 (Analog Devices AD1881A) > ac97: codec features headphone, Analog Devices Phat Stereo > audio0 at autri0 > midi0 at autri0: <4DWAVE MIDI UART> > pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc3: > DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using ivec 0x7cc for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <ST3120213A> > wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors > atapiscsi0 at pciide0 channel 0 drive 1 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <LITEON, CD-ROM LTN486S, Y3S2> ATAPI 5/cdrom > removable > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 > wd1 at pciide0 channel 1 drive 0: <WDC WD1600AAJB-00J3A0> > wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 > ppb0 at pci0 dev 5 function 0 "Intel S21152BB" rev 0x00 > pci1 at ppb0 bus 1 > rl0 at pci1 dev 2 function 0 "D-Link DFE-530TX+" rev 0x10: ivec 0x7d5, > address 00:11:95:21:ec:70 > rlphy0 at rl0 phy 0: RTL internal PHY > machfb0 at pci0 dev 19 function 0 "ATI Rage XL" rev 0x27 > machfb0: ATY,RageXL, 800x600 > wsdisplay0 at machfb0 mux 1: console (std, sun emulation) > usb0 at ohci0: USB revision 1.0 > uhub0 at usb0 "Sun OHCI root hub" rev 1.00/1.00 addr 1 > uhidev0 at uhub0 port 1 configuration 1 interface 0 "Fujitsu Component > Type 6 Keyboard" rev 1.00/1.02 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33 > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > uhidev1 at uhub0 port 2 configuration 1 interface 0 "Logitech USB-PS/2 > Optical Mouse" rev 2.00/20.00 addr 3 > uhidev1: iclass 3/1 > ums0 at uhidev1: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > bootpath: /pci@1f,0/ide@d,0/disk@0,0 > root on wd0a (a3fcc6617d442473.a) swap on wd0b dump on wd0b > [ 38.327] (--) Using wscons driver > [ 38.472] > X.Org X Server 1.16.4 > Release Date: 2014-12-20 > [ 38.472] X Protocol Version 11, Revision 0 > [ 38.472] Build Operating System: OpenBSD 5.8 sparc64 > [ 38.473] Current Operating System: OpenBSD fuseki.my.domain 5.8 > GENERIC#603 sparc64 > [ 38.477] Build Date: 29 June 2015 11:42:56AM > [ 38.477] > [ 38.477] Current version of pixman: 0.32.6 > [ 38.477] Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > [ 38.477] Markers: (--) probed, (**) from config file, (==) default > setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > [ 38.480] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 30 > 21:12:02 2015 > [ 38.525] (==) Using config file: "/etc/X11/xorg.conf" > [ 38.525] (==) Using system config directory > "/usr/X11R6/share/X11/xorg.conf.d" > [ 38.570] (==) ServerLayout "X.org Configured" > [ 38.570] (**) |-->Screen "Screen0" (0) > [ 38.570] (**) | |-->Monitor "Monitor0" > [ 38.575] (**) | |-->Device "Card0" > [ 38.589] (**) |-->Input Device "Mouse0" > [ 38.589] (**) |-->Input Device "Keyboard0" > [ 38.591] (**) Option "AutoAddDevices" "False" > [ 38.591] (**) Option "UseSIGIO" "false" > [ 38.591] (**) Disabling SIGIO handlers for input devices > [ 38.591] (**) Not automatically adding devices > [ 38.591] (==) Automatically enabling devices > [ 38.591] (==) Not automatically adding GPU devices > [ 38.765] (==) FontPath set to: > /usr/X11R6/lib/X11/fonts/misc/, > /usr/X11R6/lib/X11/fonts/TTF/, > /usr/X11R6/lib/X11/fonts/OTF/, > /usr/X11R6/lib/X11/fonts/Type1/, > /usr/X11R6/lib/X11/fonts/100dpi/, > /usr/X11R6/lib/X11/fonts/75dpi/ > [ 38.765] (==) ModulePath set to "/usr/X11R6/lib/modules" > [ 38.774] (II) Loader magic: 0x9e5aa879f8 > [ 38.774] (II) Module ABI versions: > [ 38.775] X.Org ANSI C Emulation: 0.4 > [ 38.775] X.Org Video Driver: 18.0 > [ 38.775] X.Org XInput driver : 21.0 > [ 38.775] X.Org Server Extension : 8.0 > [ 38.807] (--) PCI:*(0:0:19:0) 1002:4752:0000:0000 rev 39, Mem @ > 0x04000000/16777216, 0x00426000/4096, I/O @ 0x00000b00/256, BIOS @ > 0x????????/131072 > [ 38.809] (II) LoadModule: "glx" > [ 38.847] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so > [ 39.389] (II) Module glx: vendor="X.Org Foundation" > [ 39.389] compiled for 1.16.4, module version = 1.0.0 > [ 39.389] ABI class: X.Org Server Extension, version 8.0 > [ 39.390] (==) AIGLX enabled > [ 39.391] (II) LoadModule: "mach64" > [ 39.392] (II) Loading /usr/X11R6/lib/modules/drivers/mach64_drv.so > [ 39.412] (II) Module mach64: vendor="X.Org Foundation" > [ 39.412] compiled for 1.16.4, module version = 6.9.5 > [ 39.412] Module class: X.Org Video Driver > [ 39.412] ABI class: X.Org Video Driver, version 18.0 > [ 39.420] (II) LoadModule: "mouse" > [ 39.436] (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so > [ 39.450] (II) Module mouse: vendor="X.Org Foundation" > [ 39.450] compiled for 1.16.4, module version = 1.9.1 > [ 39.450] Module class: X.Org XInput Driver > [ 39.450] ABI class: X.Org XInput driver, version 21.0 > [ 39.452] (II) LoadModule: "kbd" > [ 39.457] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so > [ 39.465] (II) Module kbd: vendor="X.Org Foundation" > [ 39.465] compiled for 1.16.4, module version = 1.8.0 > [ 39.465] Module class: X.Org XInput Driver > [ 39.465] ABI class: X.Org XInput driver, version 21.0 > [ 39.465] (II) MACH64: Driver for ATI Mach64 chipsets > [ 39.470] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card > support > [ 39.472] (**) MACH64(0): Depth 24, (--) framebuffer bpp 32 > [ 39.479] (**) MACH64(0): Option "reference_clock" "29.5MHz" > [ 39.479] (==) MACH64(0): Using EXA acceleration architecture > [ 39.481] (EE) Unable to map mmio aperture. Invalid argument (22) > [ 39.481] (WW) MACH64: Mach64 in slot 0:19:0 could not be detected! > [ 39.487] (II) UnloadModule: "mach64" > [ 39.487] (EE) Screen(s) found, but none have a usable configuration. > [ 39.487] (EE) > Fatal server error: > [ 39.487] (EE) no screens found(EE) > [ 39.488] (EE) > Please consult the The X.Org Foundation support > at http://wiki.x.org > for help. > [ 39.488] (EE) Please also check the log file at "/var/log/Xorg.0.log" > for additional information. > [ 39.488] (EE) > [ 39.497] (EE) Server terminated with error (1). Closing log file. > Section "ServerLayout" > Identifier "X.org Configured" > Screen 0 "Screen0" 0 0 > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > # following test is a test for kettenis@ > # Message-Id: <201008302131.o7ulvpqk002...@glazunov.sibelius.xs4all.nl> > Section "ServerFlags" > Option "UseSIGIO" "false" > Option "AutoAddDevices" "False" > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "keyboard" > Option "Protocol" "wskbd" > Option "Device" "/dev/wskbd0" > Option "XKbdRules" "xorg" > Option "XkbdLayout" "us" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "wsmouse" > Option "Device" "/dev/wsmouse0" > Option "ZAxisMapping" "4 5" > EndSection > > Section "Monitor" > Identifier "Monitor0" > VendorName "LG" > ModelName "Flatron L1953T" > #HorizSync 40-60 > #VertRefresh 50-70 > VertRefresh 56.0 - 75.0 > HorizSync 30.0 - 83.0 > #DisplaySize 360 270 > Option "DPMS" > EndSection > > Section "Device" > ### Available Driver options are:- > ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", > ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" > ### [arg]: arg optional > #Option "probe_sparse" # [<bool>] > #Option "accel" # [<bool>] > #Option "crt_display" # [<bool>] > #Option "composite_sync" # [<bool>] > #Option "hw_cursor" # [<bool>] > #Option "force_pci_mode" # [<bool>] > #Option "dma_mode" # <str> > #Option "agp_mode" # <i> > #Option "agp_size" # <i> > #Option "local_textures" # [<bool>] > #Option "buffer_size" # <i> > #Option "mmio_cache" # [<bool>] > #Option "test_mmio_cache" # [<bool>] > #Option "panel_display" # [<bool>] > #Option "reference_clock" # <freq> > #Option "shadow_fb" # [<bool>] > #Option "sw_cursor" # [<bool>] > #Option "AccelMethod" # <str> > #Option "RenderAccel" # [<bool>] > Identifier "Card0" > Driver "mach64" > VendorName "ATI" > BoardName "Rage XL" > #ChipSet "ati" > ChipId 0x4752 > ChipRev 0x27 > BusID "PCI:0:19:0" > Option "reference_clock" "29.5MHz" > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > DefaultDepth 24 > SubSection "Display" > Viewport 0 0 > #Virtual 1600 1200 > Depth 24 > #Modes "1600x1200" > Modes "1280x1024" "1024x768" "800x600" "640x480" > EndSubSection > EndSection
