On Wed, Sep 2, 2015 at 1:54 PM, Kapetanakis Giannis < bil...@edu.physics.uoc.gr> wrote:
> On 02/09/15 10:31, Roger Skjetlein wrote: > >> Hi, >> >> >> have an issue with ospfd when using multiple areas and networks from area >> 10.0.30.0 not distributed to 0.0.0.0. >> >> eg >> >> the network for em0 is 10.0.30.0/24 and is never seen in ospf routing >> table. Moving interface em0 to area 0.0.0.0 solves the distribution of the >> network, but not having multiple areas. >> >> OpenBSD 5.7/i386 >> > > I also have the exact same issue and solved it by moving to area 0.0.0.0 > > Check out this thread > http://marc.info/?l=openbsd-misc&m=136995074911854&w=2 > don't know it's current status and what happened with the patch. > > hint: if you have a second ospf router on 10.0.30.0 area then the route is > distributed. > > > Yes, saw your thread on this and was suprised that this still was an issue when i could get the other area subnet to be distributed in the network. Followed your recommendation/workaround and the network was distributed, but it didnt really solve my problem, that is to have several areas. -- "Over vidden flyger renen; efter den i vind og væde! - Bedre det, end bryde stenen op af fattig jord dernede!"
