On 01.10.2015 20:00, Sebastien Marie wrote:
On Thu, Oct 01, 2015 at 12:21:33PM -0400, Michael McConville wrote:
Atanas Vladimirov wrote:
> Snapshot from sep 30 bgpd didn't startup:
> Oct 1 08:32:28 ns /bsd: bgpd(28055): syscall 105
> Oct 1 08:32:28 ns bgpd[29697]: handle_pollfd: poll fd: Undefined error: 0
> Oct 1 08:32:28 ns bgpd[29697]: RDE: Lost connection to SE
> Oct 1 08:32:28 ns bgpd[27739]: handle_pollfd: poll fd: No such file or
> directory
> Oct 1 08:32:28 ns bgpd[29697]: handle_pollfd: poll fd: Undefined error: 0
> Oct 1 08:32:28 ns bgpd[29697]: RDE: Lost connection to SE control
> Oct 1 08:32:28 ns bgpd[27739]: main: Lost connection to SE
> Oct 1 08:32:28 ns bgpd[27739]: Lost child: session engine terminated;
> signal 9
This looks like a result of the new tame(2)ing. Below are the tame
calls
that were just added to bgpd, according to Theo's diff.
the revision 1.46 of src/sys/kern/kern_tame.c should have corrected the
problem.
bgpd use IPv6 setsockopts that weren't allowed.
Snapshot Thu Oct 1 20:58:20 MDT 2015
Oct 2 10:34:42 ns /bsd: bgpd(20063): sysctl 6: 4 17 0 0 3 0
Oct 2 10:34:42 ns /bsd: bgpd(20063): syscall 202
Oct 2 10:34:42 ns bgpd[23914]: handle_pollfd: poll fd: No such file or
directory
Oct 2 10:34:42 ns bgpd[23914]: main: Lost connection to RDE
Oct 2 10:34:42 ns bgpd[23914]: Lost child: route decision engine
terminated; signal 9
15629 bgpd GIO fd 2 wrote 84 bytes
"neighbor 64.142.121.62: state change Connect -> OpenSent,
reason: Connection opened
"
15629 bgpd RET write 84/0x54
15629 bgpd CALL write(2,0x7f7ffffbc240,0x4b)
15629 bgpd GIO fd 2 wrote 75 bytes
"neighbor 217.31.80.170: sending notification: Cease,
administratively down
"
15629 bgpd RET write 75/0x4b
15629 bgpd CALL sendmsg(10,0x7f7ffffbc840,0)
15629 bgpd STRU struct msghdr { name=0x0, namelen=0,
iov=0x7f7ffffb8840, iovlen=1, control=0x0, controllen=0, flags=0 }
15629 bgpd STRU struct iovec { base=0xc19f3bab0c0, len=21 }
15629 bgpd GIO fd 10 wrote 21 bytes
"\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\0\^U\^C\^F\^B"
15629 bgpd RET sendmsg 21/0x15
15629 bgpd CALL close(10)
15629 bgpd RET close 0
15629 bgpd CALL gettimeofday(0x7f7ffffbc860,0)
15629 bgpd STRU struct timeval { 1443771283<"Oct 2 10:34:43
2015">.044866 }
15629 bgpd RET gettimeofday 0
15629 bgpd PSIG SIGSEGV SIG_DFL code SEGV_MAPERR<1> addr=0x1003c
trapno=6
23914 bgpd RET wait4 -1 errno 10 No child processes
23914 bgpd PSIG SIGSEGV SIG_DFL code SEGV_MAPERR<1> addr=0x10020
trapno=6
23914 bgpd NAMI "bgpd.core"
OpenBSD 5.8-current (GENERIC.MP) #1405: Thu Oct 1 20:58:20 MDT 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4261285888 (4063MB)
avail mem = 4128014336 (3936MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe9510 (23 entries)
bios0: vendor American Megatrends Inc. version "1.1" date 04/29/2014
bios0: Supermicro X9SBAA
acpi0 at bios0: rev 2
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP APIC FPDT MCFG HPET SPMI EINJ ERST HEST BERT
acpi0: wakeup devices PRP4(S1)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU S1260 @ 2.00GHz, 1995.22 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-C
PL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.0.2.0.3, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU S1260 @ 2.00GHz, 1995.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-C
PL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu1: 512KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Atom(TM) CPU S1260 @ 2.00GHz, 1995.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-C
PL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu2: 512KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Atom(TM) CPU S1260 @ 2.00GHz, 1995.00 MHz
[41/1961]
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-C
PL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu3: 512KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xc0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PRP1)
acpiprt2 at acpi0: bus 2 (PRP2)
acpiprt3 at acpi0: bus 4 (P3P4)
acpicpu0 at acpi0: C1(1000@20 halt), PSS
acpicpu1 at acpi0: C1(1000@20 halt), PSS
acpicpu2 at acpi0: C1(1000@20 halt), PSS
acpicpu3 at acpi0: C1(1000@20 halt), PSS
acpitz0 at acpi0: critical temperature is 127 degC
acpitz1 at acpi0: critical temperature is 175 degC
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
ipmi at mainbus0 not configured
cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2000, 1900, 1800, 1700, 1600,
1500, 1400, 1300, 1200, 1100, 1000, 900, 800, 700, 600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Atom S1260 Host" rev 0x01
ppb0 at pci0 dev 1 function 0 "Intel Atom S1200 PCIE" rev 0x01
pci1 at ppb0 bus 1
ahci0 at pci1 dev 0 function 0 "Marvell 88SE9230 AHCI" rev 0x10: msi,
AHCI 1.2
ahci0: port 0: 6.0Gb/s
ahci0: port 2: 1.5Gb/s
ahci0: port 7: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST3160316AS, JC4B> SCSI3 0/direct
fixed naa.5000c50040390431
sd0: 152627MB, 512 bytes/sector, 312581808 sectors
sd1 at scsibus1 targ 2 lun 0: <ATA, HDT722516DLA380, V43O> SCSI3
0/direct fixed naa.5000cca205d8de7f
sd1: 157066MB, 512 bytes/sector, 321672960 sectors
uk0 at scsibus1 targ 7 lun 0: <Marvell, Console, 1.01> ATAPI 3/processor
removable
ppb1 at pci0 dev 2 function 0 "Intel Atom S1200 PCIE" rev 0x01
pci2 at ppb1 bus 2
xhci0 at pci2 dev 0 function 0 "Renesas uPD720201 xHCI" rev 0x03: msi
xhci0: reset timeout
xhci0: init failed, error=5
ppb2 at pci0 dev 3 function 0 "Intel Atom S1200 PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci3 dev 0 function 0 "Newbridge PEB383 PCIE-PCI" rev 0x01
pci4 at ppb3 bus 4
em0 at pci4 dev 0 function 0 "Intel 82540EM" rev 0x02: apic 2 int 21,
address 00:07:e9:10:32:a8
vga1 at pci4 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb4 at pci0 dev 4 function 0 "Intel Atom S1200 PCIE" rev 0x01
pci5 at ppb4 bus 5
em1 at pci5 dev 0 function 0 "Intel I350" rev 0x01: msi, address
00:25:90:c6:31:70
em2 at pci5 dev 0 function 1 "Intel I350" rev 0x01: msi, address
00:25:90:c6:31:71
"Intel Atom S1200 MEI" rev 0x01 at pci0 dev 14 function 0 not configured
"Intel Atom S1200 SMBus" rev 0x01 at pci0 dev 19 function 0 not
configured
"Intel Atom S1200 SMBus" rev 0x01 at pci0 dev 19 function 1 not
configured
puc0 at pci0 dev 20 function 0 "Intel Atom S1200 UART" rev 0x01: ports:
1 com
com4 at puc0 port 0 apic 2 int 16: ns16550a, 16 byte fifo
pcib0 at pci0 dev 31 function 0 "Intel Atom S1200 ISA" rev 0x01
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: console
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct
fixed
sd2: 152625MB, 512 bytes/sector, 312576113 sectors
root on sd2a (2369b3fc45f6ff52.a) swap on sd2b dump on sd2b
bgpd(8266): sysctl 6: 4 17 0 0 3 0
bgpd(8266): syscall 202
bgpd(7899): sysctl 6: 4 17 0 0 3 0
bgpd(7899): syscall 202
bgpd(20063): sysctl 6: 4 17 0 0 3 0
bgpd(20063): syscall 202
