mcmer-open...@tor.at (Marcus MERIGHI), 2015.10.08 (Thu) 12:26 (CEST): > kwesterb...@gmail.com (Kenneth Westerback), 2014.03.19 (Wed) 17:09 (CET): > > Alas, softraid only supports 512 byte block devices at the moment. > > .... Ken > > Any news on this one? No answer as always means 'no'.
After reading the commit log for softraid I am pretty sure the answer is 'no'. Therefore I have a) a patch for softraid(4) and b) another question. Question: searching for large (>1TB) HDDs I found there's '512e' [1]. Is this enough for softraid to work? The wikipedia article reads good, just to make sure. Index: softraid.4 =================================================================== RCS file: /cvs/src/share/man/man4/softraid.4,v retrieving revision 1.41 diff -u -p -u -r1.41 softraid.4 --- softraid.4 14 Apr 2015 19:10:13 -0000 1.41 +++ softraid.4 8 Oct 2015 10:53:25 -0000 @@ -208,3 +208,5 @@ due to component failure. RAID is .Em not a substitute for good backup practices. +.Pp +Only disks with 512 bytes per sector are supported. [1] https://en.wikipedia.org/wiki/Advanced_Format#512e Bye, Marcus > I saw plus58.html: > * Use DEV_BSIZE instead of 512 where appropriate in the kernel. This > starts laying the groundwork to allow disks with other sector sizes. > > > Just asking because some time has gone by and krw@ thought it was a > pitty [0]: > > [0] http://dictionary.reference.com/browse/alas > used as an exclamation to express sorrow, grief, pity, concern, or > apprehension of evil. > > Thanks+Bye, Marcus > > > On Mar 19, 2014 11:36 AM, "Marcus MERIGHI" <mcmer-open...@tor.at> wrote: > > > > > Reference: > > > ``Softraid 3TB Problems'' > > > http://marc.info/?l=openbsd-misc&m=136225193931620 > > > > > > Difference: > > > My HDDs show up as 4096 bytes/sector in dmesg. > > > > > > Short: > > > Are there any options for disks that come with 4096 bytes/sector to use > > > with softraid(4)/bioctl(8)? > > > > > > Long: > > > > > > So I got these lovely large disks: > > > > > > DMESG (full one at the end): > > > > > > umass4 at uhub5 port 4 configuration 1 interface 0 "Intenso USB 3.0 > > > Device" rev 2.10/1.00 addr 9 > > > umass4: using SCSI over Bulk-Only > > > scsibus5 at umass4: 2 targets, initiator 0 > > > sd5 at scsibus5 targ 1 lun 0: <Intenso, USB 3.0 Device, 0> SCSI4 > > > 0/direct fixed serial.174c55aa0000000022DF > > > sd5: 2861588MB, 4096 bytes/sector, 732566646 sectors > > > ^^^^ > > > I suppose right above is my problem? > > > > > > FDISK: > > > > > > Disk: sd5 geometry: 45600/255/63 [732566646 4096-byte Sectors] > > > Offset: 0 Signature: 0xAA55 > > > Starting Ending LBA Info: > > > #: id C H S - C H S [ start: size ] > > > > > > > > ----------------------------------------------------------------------------- > > -- > > > 0: 00 0 0 0 - 0 0 0 [ 0: 0 ] > > > unused > > > 1: 00 0 0 0 - 0 0 0 [ 0: 0 ] > > > unused > > > 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] > > > unused > > > *3: A6 0 1 2 - 45599 254 63 [ 64: 732563936 ] > > > OpenBSD > > > > > > DISKLABEL: > > > > > > # /dev/rsd5c: > > > type: SCSI > > > disk: SCSI disk > > > label: whoknows > > > duid: 470974d3647801b8 > > > flags: > > > bytes/sector: 4096 > > > sectors/track: 63 > > > tracks/cylinder: 255 > > > sectors/cylinder: 16065 > > > cylinders: 45600 > > > total sectors: 732566646 > > > boundstart: 64 > > > boundend: 732564000 > > > drivedata: 0 > > > > > > 16 partitions: > > > # size offset fstype [fsize bsize cpg] > > > a: 732563936 64 RAID > > > c: 732566646 0 unused > > > > > > BIOCTL output > > > > > > $ sudo bioctl -h -v -c C -l /dev/sd3a softraid0 > > > softraid0: sd3a has unsupported sector size (4096) > > > softraid0: invalid metadata format > > > > > > Thanks in advance, Marcus > > > > > > DMESG FULL: > > > This is -current with a patch from brad@ to get the NICs (re) working. > > > > > > OpenBSD 5.5-current (GENERIC.MP) #3: Tue Mar 11 14:18:33 CET 2014 > > > r...@fofo.fifi.at:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > > real mem = 4161052672 (3968MB) > > > avail mem = 4041580544 (3854MB) > > > mainbus0 at root > > > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeb530 (73 entries) > > > bios0: vendor American Megatrends Inc. version "1.03" date 08/09/2013 > > > bios0: Shuttle Inc. DS47D > > > acpi0 at bios0: rev 2 > > > acpi0: sleep states S0 S3 S4 S5 > > > acpi0: tables DSDT FACP APIC FPDT MCFG SLIC HPET SSDT SSDT SSDT > > > acpi0: wakeup devices P0P1(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) > > > USB5(S3) USB6(S3) USB7(S3) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) > > > RP03(S4) PXSX(S4) RP04(S4) [...] > > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > > cpu0 at mainbus0: apid 0 (boot processor) > > > cpu0: Intel(R) Celeron(R) CPU 847 @ 1.10GHz, 1097.67 MHz > > > cpu0: > > > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX > > ,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE > > ,NXE,LONG,LAHF,PERF,ITSC > > > cpu0: 256KB 64b/line 8-way L2 cache > > > cpu0: smt 0, core 0, package 0 > > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > > cpu0: apic clock running at 99MHz > > > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > > > cpu1 at mainbus0: apid 2 (application processor) > > > cpu1: Intel(R) Celeron(R) CPU 847 @ 1.10GHz, 1097.51 MHz > > > cpu1: > > > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX > > ,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE > > ,NXE,LONG,LAHF,PERF,ITSC > > > cpu1: 256KB 64b/line 8-way L2 cache > > > cpu1: smt 0, core 1, package 0 > > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > > > acpihpet0 at acpi0: 14318179 Hz > > > acpiprt0 at acpi0: bus 0 (PCI0) > > > acpiprt1 at acpi0: bus -1 (P0P1) > > > acpiprt2 at acpi0: bus 1 (RP01) > > > acpiprt3 at acpi0: bus 2 (RP02) > > > acpiprt4 at acpi0: bus 3 (RP03) > > > acpiprt5 at acpi0: bus 4 (RP04) > > > acpiprt6 at acpi0: bus -1 (RP05) > > > acpiprt7 at acpi0: bus -1 (RP06) > > > acpiprt8 at acpi0: bus -1 (RP07) > > > acpiprt9 at acpi0: bus -1 (RP08) > > > acpiprt10 at acpi0: bus -1 (PEG0) > > > acpiprt11 at acpi0: bus -1 (PEG1) > > > acpiprt12 at acpi0: bus -1 (PEG2) > > > acpiprt13 at acpi0: bus -1 (PEG3) > > > acpiec0 at acpi0: Failed to read resource settings > > > acpicpu0 at acpi0: C1, PSS > > > acpicpu1 at acpi0: C1, PSS > > > acpipwrres0 at acpi0: FN00, resource for FAN0 > > > acpipwrres1 at acpi0: FN01, resource for FAN1 > > > acpipwrres2 at acpi0: FN02, resource for FAN2 > > > acpipwrres3 at acpi0: FN03, resource for FAN3 > > > acpipwrres4 at acpi0: FN04, resource for FAN4 > > > acpitz0 at acpi0: critical temperature is 101 degC > > > acpitz1 at acpi0: critical temperature is 101 degC > > > acpibat0 at acpi0: BAT0 not present > > > acpibat1 at acpi0: BAT1 not present > > > acpibat2 at acpi0: BAT2 not present > > > acpibtn0 at acpi0: PWRB > > > acpibtn1 at acpi0: LID0 > > > acpivideo0 at acpi0: GFX0 > > > cpu0: Enhanced SpeedStep 1097 MHz: speeds: 1100, 1000, 900, 800 MHz > > > pci0 at mainbus0 bus 0 > > > pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > > > vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09 > > > intagp0 at vga1 > > > agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 > > > inteldrm0 at vga1 > > > drm0 at inteldrm0 > > > inteldrm0: 1280x1024 > > > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > > > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 > > > int 16 > > > usb0 at ehci0: USB revision 2.0 > > > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: > > > msi > > > azalia0: codecs: Realtek ALC662, Intel/0x2806, using Realtek ALC662 > > > audio0 at azalia0 > > > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi > > > pci1 at ppb0 bus 1 > > > iwn0 at pci1 dev 0 function 0 "Intel Wireless WiFi Link 4965" rev 0x61: > > > msi, MIMO 2T3R, MoW2, address 00:21:5c:04:ca:5f > > > ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi > > > pci2 at ppb1 bus 2 > > > re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G > > > (0x4c00), msi, address 80:ee:73:77:d5:a9 > > > rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0 > > > ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi > > > pci3 at ppb2 bus 3 > > > vendor "ASMedia", unknown product 0x1142 (class serial bus subclass USB, > > > rev 0x00) at pci3 dev 0 function 0 not configured > > > ppb3 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi > > > pci4 at ppb3 bus 4 > > > re1 at pci4 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G > > > (0x4c00), msi, address 80:ee:73:77:d5:a8 > > > rgephy1 at re1 phy 7: RTL8251 PHY, rev. 0 > > > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 > > > int 23 > > > usb1 at ehci1: USB revision 2.0 > > > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > > pcib0 at pci0 dev 31 function 0 "Intel NM70 LPC" rev 0x04 > > > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, > > > AHCI 1.3 > > > scsibus0 at ahci0: 32 targets > > > sd0 at scsibus0 targ 2 lun 0: <ATA, TS8GMSM610, 2013> SCSI3 0/direct > > > fixed t10.ATA_TS8GMSM610_A93797112253B1000021 > > > sd0: 7641MB, 512 bytes/sector, 15649200 sectors > > > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic > > > 2 int 18 > > > iic0 at ichiic0 > > > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > > > isa0 at pcib0 > > > isadma0 at isa0 > > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > > > pckbc0 at isa0 port 0x60/5 > > > pcppi0 at isa0 port 0x61 > > > spkr0 at pcppi0 > > > it0 at isa0 port 0x2e/2: IT8728F rev 1, EC port 0xa30 > > > uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > > > ugen0 at uhub2 port 1 "APC Back-UPS ES 550G FW:870.O2 .I USB FW:O2" rev > > > 1.10/1.06 addr 3 > > > uhidev0 at uhub2 port 2 configuration 1 interface 0 "NOVATEK USB > > > Keyboard" rev 1.10/1.04 addr 4 > > > uhidev0: iclass 3/1 > > > ukbd0 at uhidev0: 8 variable keys, 6 key codes > > > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > > > uhidev1 at uhub2 port 2 configuration 1 interface 1 "NOVATEK USB > > > Keyboard" rev 1.10/1.04 addr 4 > > > uhidev1: iclass 3/0, 2 report ids > > > uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0 > > > uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0 > > > uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > > > umass0 at uhub3 port 2 configuration 1 interface 0 "Generic USB Storage" > > > rev 2.00/94.54 addr 3 > > > umass0: using SCSI over Bulk-Only > > > scsibus1 at umass0: 2 targets, initiator 0 > > > sd1 at scsibus1 targ 1 lun 0: <Generic, STORAGE DEVICE, 9454> SCSI0 > > > 0/direct removable > > > uhub4 at uhub3 port 3 "TRANSCEND USB2.0 Hub" rev 2.00/90.30 addr 4 > > > umass1 at uhub4 port 3 configuration 1 interface 0 "Intenso USB 3.0 > > > Device" rev 2.10/1.00 addr 5 > > > umass1: using SCSI over Bulk-Only > > > scsibus2 at umass1: 2 targets, initiator 0 > > > sd2 at scsibus2 targ 1 lun 0: <Intenso, USB 3.0 Device, 0> SCSI4 > > > 0/direct fixed serial.174c55aa000000001EA0 > > > sd2: 2861588MB, 4096 bytes/sector, 732566646 sectors > > > umass2 at uhub4 port 4 configuration 1 interface 0 "Intenso USB 3.0 > > > Device" rev 2.10/1.00 addr 6 > > > umass2: using SCSI over Bulk-Only > > > scsibus3 at umass2: 2 targets, initiator 0 > > > sd3 at scsibus3 targ 1 lun 0: <Intenso, USB 3.0 Device, 0> SCSI4 > > > 0/direct fixed serial.174c55aa000000004CC1 > > > sd3: 2861588MB, 4096 bytes/sector, 732566646 sectors > > > uhub5 at uhub3 port 4 "TRANSCEND USB2.0 Hub" rev 2.00/90.30 addr 7 > > > umass3 at uhub5 port 3 configuration 1 interface 0 "Intenso USB 3.0 > > > Device" rev 2.10/1.00 addr 8 > > > umass3: using SCSI over Bulk-Only > > > scsibus4 at umass3: 2 targets, initiator 0 > > > sd4 at scsibus4 targ 1 lun 0: <Intenso, USB 3.0 Device, 0> SCSI4 > > > 0/direct fixed serial.174c55aa000000001F1F > > > sd4: 2861588MB, 4096 bytes/sector, 732566646 sectors > > > umass4 at uhub5 port 4 configuration 1 interface 0 "Intenso USB 3.0 > > > Device" rev 2.10/1.00 addr 9 > > > umass4: using SCSI over Bulk-Only > > > scsibus5 at umass4: 2 targets, initiator 0 > > > sd5 at scsibus5 targ 1 lun 0: <Intenso, USB 3.0 Device, 0> SCSI4 > > > 0/direct fixed serial.174c55aa0000000022DF > > > sd5: 2861588MB, 4096 bytes/sector, 732566646 sectors > > > vscsi0 at root > > > scsibus6 at vscsi0: 256 targets > > > softraid0 at root > > > scsibus7 at softraid0: 256 targets > > > root on sd0a (cc476e21b86f4015.a) swap on sd0b dump on sd0b > > > softraid0: sd2a has unsupported sector size (4096) > > > softraid0: invalid metadata format > !DSPAM:5616461145311094310456!