On Sun, Oct 11, 2015 at 12:47:42PM -0600, Jack J. Woehr wrote: > Jiri B wrote: > >c Cisco's AnyConnect SSL VPN and Juniper SSL VPN which is now known as > >Pulse Connect Secure is supported by openconnect which is in ports. > > I found vpnc in ports/net and that almost works. > > It connects and shows it is adding the correct routes that I would expect. > > And then no traffic comes through. 'route show' looks correct but nothing > seems to be going back and forth.
I use vpnc regularly on -current without any special configuration and it works fine with my network. My config is as follows: IPSec gateway vpn.example.net IPSec ID FOO IPSec obfuscated secret BAR Xauth username BAZ DPD idle timeout (our side) 0