For i386/amd64 you have to tell boot you want serial output either at the boot prompt or via boot.conf.
stty com0 115200 set tty com0 On Mon, Oct 19, 2015 at 10:34:15PM -0400, Daniel Ouellet wrote: > Hi, > > I am trying to load OpenBSD on this box and no matter what I try I end > up not being able too. > > I did search and saw plenty that were successful and all. May be it's > the newer model. > > APU.1D4? > > Or is there any special truck? > > I tried from usb flash drive, and even from a Sata drive inside a USB > hosing. > > Could this may be use UEFI now? > > I tried 5.7, 5.8 and still no go. > > May be the only way to load it in there is via PXE- Boot? > > And I saw the note as well about the bios for OpenBSD in case anyone > thought to say that. It is newer then April 2014 as recommended. > > Here is where it block no matter what drives and version I tried. > > Any clue stick would be greatly appreciated. I obviously must be > overlooking something stupid... > > Daniel > > ============================================= > USB Fash Drive > ============================================= > > PC Engines APU BIOS build date: Sep 8 2014 > Total memory 4096 MB > AMD G-T40E Processor > CPU MHz=1000 > USB MSC blksize=512 sectors=7897088 > Press F10 key now for boot menu: > drive 0x000f2a60: PCHS=0/0/0 translation=lba LCHS=979/128/63 s=7897088 > drive 0x000f2a90: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 > s=31277232 > Booting from Hard Disk... > Using drive 0, partition 3. > Loading..... > probing: pc0 com0 com1 mem[639K 3568M 496M a20=on] > disk: hd0+ hd1+* > >> OpenBSD/amd64 BOOT 3.28 > boot> > booting hd0a:/bsd: 6707920+2128368+250888+0+598016 > [97+561408+373901]=0xa228f8 > entry point at 0x1000160 [7205c766, 34000004, 24448b12, 62e0a304] > > ============================================= > SATA Drive via USB adaptor > ============================================= > > > PC Engines APU BIOS build date: Sep 8 2014 > Total memory 4096 MB > AMD G-T40E Processor > CPU MHz=1000 > USB MSC blksize=512 sectors=125045424 > Press F10 key now for boot menu: > drive 0x000f2a60: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=125045424 > drive 0x000f2a90: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 > s=31277232 > Booting from Hard Disk... > Using drive 0, partition 3. > Loading..... > probing: pc0 com0 com1 mem[639K 3568M 496M a20=on] > disk: hd0+ hd1+* > >> OpenBSD/amd64 BOOT 3.28 > boot> > booting hd0a:/bsd:6741232+2129936+250888+0+598016 > [97+563616+375372/]=0xa2c758 > entry point at 0x1000160 [7205c766, 34000004, 24448b12, f2e0a304]
