2015-10-31 10:56 GMT-04:00 Dewey Hylton <dewey.hyl...@gmail.com>:
> On Sat, Oct 31, 2015 at 12:49 AM, Jonathan Gray <j...@jsg.id.au> wrote:
>
>> On Fri, Oct 30, 2015 at 11:32:16AM -0400, Dewey Hylton wrote:
>> > >
>> > didn't have -current onhand, but was able to perform this function on a
>> 5.8
>> > system ... i have 3 of these devices i'd really like to get going on
>> > openbsd. THANKS!
>>
>> ...
>>
>> > Invalid PHY ID 0xA0044E90
>>
>> This shouldn't be possible, perhaps something isn't powering up correctly.
>>
>> You could try the following patch which will force the id to a known one:
>>
>> Index: if_em_hw.c
>> ===================================================================
>> RCS file: /cvs/src/sys/dev/pci/if_em_hw.c,v
>> retrieving revision 1.88
>> diff -u -p -r1.88 if_em_hw.c
>> --- if_em_hw.c 12 Sep 2015 02:38:14 -0000 1.88
>> +++ if_em_hw.c 31 Oct 2015 04:43:49 -0000
>> @@ -5369,6 +5369,9 @@ em_match_gig_phy(struct em_hw *hw)
>> hw->phy_id |= (uint32_t) (phy_id_low & PHY_REVISION_MASK);
>> hw->phy_revision = (uint32_t) phy_id_low & ~PHY_REVISION_MASK;
>>
>> + if (hw->phy_id == 0xA0044E90)
>> + hw->phy_id = I210_I_PHY_ID;
>> +
>> switch (hw->mac_type) {
>> case em_82543:
>> if (hw->phy_id == M88E1000_E_PHY_ID)
>> Index: if_em_osdep.h
>> ===================================================================
>> RCS file: /cvs/src/sys/dev/pci/if_em_osdep.h,v
>> retrieving revision 1.12
>> diff -u -p -r1.12 if_em_osdep.h
>> --- if_em_osdep.h 5 Oct 2011 02:52:10 -0000 1.12
>> +++ if_em_osdep.h 29 Oct 2015 03:27:36 -0000
>> @@ -44,7 +44,8 @@ POSSIBILITY OF SUCH DAMAGE.
>>
>> #define MSGOUT(S, A, B) printf(S "\n", A, B)
>> #define DEBUGFUNC(F) DEBUGOUT(F);
>> -#ifdef DBG
>> +//#ifdef DBG
>> +#if 1
>> #define DEBUGOUT(S) printf(S "\n")
>> #define DEBUGOUT1(S,A) printf(S "\n",A)
>> #define DEBUGOUT2(S,A,B) printf(S "\n",A,B)
>>
>
> THANKS for your time and assistance.
>
> i now have enough networking to commence an installation, which is in
> progress. i'll have to build
> and copy in a new kernel of course to use the booted system afterward.
> assuming nothing is shown
> broken in the dmesg below, what do i need to do in order to get this
> change (or another fix which
> would not require this change, if this was just an improper hack)
> committed?
>
>
HOLD THE PRESSES!
after the installation and reboot, just prior to copying the rebuild kernel
that was to provide networking,
i notice that networking is in fact working. so somehow, with regard to
this specific network interface,
there was a disparity between bsd.rd and bsd (GENERIC) kernels. i'll try to
run this through its paces
with vlans and other such things, but at the moment it looks like GENERIC
from 5.8 actually works as
it should without any changes. perhaps it's time to dust off the old usb
installer sticks and forgo pxe for
these little devices. at least for the time being ...
is it safe to assume that the disparity between bsd.rd and bsd is due to
trimming to keep the image at
a minimum? i know other things are removed from bsd.rd for this purpose ...
and if not, does this point
to a bug for which i need to make a report?
thanks again for your assistance, Jonathan!
fresh 5.8 dmesg follows:
OpenBSD 5.8 (GENERIC.MP) #1236: Sun Aug 16 02:31:04 MDT 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3934593024 (3752MB)
avail mem = 3811454976 (3634MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xecbf0 (62 entries)
bios0: vendor American Megatrends Inc. version "SBCFLT_0.08.04" date
06/27/2015
bios0: CompuLab fitlet
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG ASF! HPET WDRT SSDT SSDT SSDT
SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices LOM_(S4) SBAZ(S4) EHC1(S4) EHC2(S4) EHC3(S4) XHC0(S4)
ODD8(S3)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD A4 Micro-6400T APU + AMD Radeon R3 Graphics, 998.26 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPC
NT,AES,XSAVE,AVX,F16C,RDRAND,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPI
CSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD A4 Micro-6400T APU + AMD Radeon R3 Graphics, 998.13 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPC
NT,AES,XSAVE,AVX,F16C,RDRAND,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPI
CSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD A4 Micro-6400T APU + AMD Radeon R3 Graphics, 998.14 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPC
NT,AES,XSAVE,AVX,F16C,RDRAND,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPI
CSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
64b/line 16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD A4 Micro-6400T APU + AMD Radeon R3 Graphics, 998.14 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPC
NT,AES,XSAVE,AVX,F16C,RDRAND,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPI
CSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
64b/line 16-way L2 cache
cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 5 pa 0xfec00000, version 21, 24 pins
ioapic1 at mainbus0: apid 6 pa 0xfec01000, version 21, 32 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (GFX_)
acpiprt2 at acpi0: bus -1 (GPP0)
acpiprt3 at acpi0: bus -1 (GPP1)
acpiprt4 at acpi0: bus -1 (GPP2)
acpiprt5 at acpi0: bus 1 (GPP3)
acpicpu0 at acpi0: !C2(0@400 io@0x414), C1(@1 halt!), PSS
acpicpu1 at acpi0: !C2(0@400 io@0x414), C1(@1 halt!), PSS
acpicpu2 at acpi0: !C2(0@400 io@0x414), C1(@1 halt!), PSS
acpicpu3 at acpi0: !C2(0@400 io@0x414), C1(@1 halt!), PSS
acpibtn0 at acpi0: PWRB
acpivideo0 at acpi0: VGA_
acpivideo1 at acpi0: VGA_
cpu0: 998 MHz: speeds: 1000 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 vendor "AMD", unknown product 0x1566 rev 0x00
vga1 at pci0 dev 1 function 0 vendor "ATI", unknown product 0x9854 rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb1 at pci0 dev 2 function 0 vendor "AMD", unknown product 0x156b rev 0x00
ppb0 at pci0 dev 2 function 5 "AMD AMD64 16h PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:01:c0:18:af:96
vendor "AMD", unknown product 0x1537 (class crypto subclass miscellaneous,
rev 0x00) at pci0 dev 8 function 0 not configured
xhci0 at pci0 dev 16 function 0 vendor "AMD", unknown product 0x7814 rev
0x11: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "AMD xHCI root hub" rev 3.00/1.00 addr 1
ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: msi, AHCI 1.3
ahci0: port 1: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, SanDisk SD6SF1M0, X231> SCSI3 0/direct
fixed naa.5001b44e703a2201
sd0: 61057MB, 512 bytes/sector, 125045424 sectors, thin
ehci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB2" rev 0x39: apic 5 int 18
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "AMD EHCI root hub" rev 2.00/1.00 addr 1
ehci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB2" rev 0x39: apic 5 int 18
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 "AMD EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x42: SMI
iic0 at piixpm0
azalia0 at pci0 dev 20 function 2 "AMD Hudson-2 HD Audio" rev 0x02: apic 5
int 16
azalia0: codecs: Realtek ALC888
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
sdhc0 at pci0 dev 20 function 7 vendor "AMD", unknown product 0x7813 rev
0x01: apic 5 int 16
sdhc0 at 0x10: can't map registers
pchb2 at pci0 dev 24 function 0 vendor "AMD", unknown product 0x1580 rev
0x00
pchb3 at pci0 dev 24 function 1 vendor "AMD", unknown product 0x1581 rev
0x00
pchb4 at pci0 dev 24 function 2 vendor "AMD", unknown product 0x1582 rev
0x00
pchb5 at pci0 dev 24 function 3 vendor "AMD", unknown product 0x1583 rev
0x00
pchb6 at pci0 dev 24 function 4 vendor "AMD", unknown product 0x1584 rev
0x00
pchb7 at pci0 dev 24 function 5 vendor "AMD", unknown product 0x1585 rev
0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub3 at uhub1 port 1 "Advanced Micro Devices product 0x7900" rev 2.00/0.18
addr 2
run0 at uhub3 port 1 configuration 1 interface 0 "Ralink 802.11 n WLAN" rev
2.00/1.01 addr 3
run0: MAC/BBP RT5390 (rev 0x0502), RF RT5370 (MIMO 1T1R), address
7c:dd:90:8b:25:bc
umass0 at uhub3 port 4 configuration 1 interface 0 "SanDisk Ultra Fit" rev
2.10/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <SanDisk, Ultra Fit, 1.00> SCSI4 0/direct
removable serial.07815583440728116073
sd1: 14663MB, 512 bytes/sector, 30031250 sectors
uhub4 at uhub2 port 1 "Advanced Micro Devices product 0x7900" rev 2.00/0.18
addr 2
uhidev0 at uhub4 port 2 configuration 1 interface 0 "Logitech USB Receiver"
rev 2.00/12.01 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 2 configuration 1 interface 1 "Logitech USB Receiver"
rev 2.00/12.01 addr 3
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z dir
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub4 port 2 configuration 1 interface 2 "Logitech USB Receiver"
rev 2.00/12.01 addr 3
uhidev2: iclass 3/0, 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (d8a8914cb2cb6cb4.a) swap on sd0b dump on sd0b
