If I try to plug in various USB 3.0 umass(4) devices into a USB 3.0 or
USB 3.1 Type C port, nothing gets registered via dmesg, even if I add
option USB_DEBUG
option UMASS_DEBUG
option XHCI_DEBUG
and compile a kernel. No dmesg output upon attachment of USB 3.0 devices.
If I try, via config(8)
UKC> disable xhci
I get no USB 2.0 support at all.
The USB 3.0 devices can only get recognised if I attach them via a USB
2.0 cable, and plug this cable into the USB 3.0 or USB 3.1 Type C
port.
I've attached
1. usbdevs via USB 2.0 with USB 3.0 device attached
2. usbdevs via USB 3.0, with USB 3.0 device attached
3. pcidump
4. and dmesg
via USB 2.0 cable
********************
$ usbdevs -vd
Controller /dev/usb0:
addr 1: super speed, self powered, config 1, xHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub0
port 1 addr 4: high speed, power 224 mA, config 1, Ultra Fit(0x5583),
SanDisk(0x0781), rev 1.00, iSerialNumber 4C530147300909108282
umass0
port 2 disabled
port 3 disabled
port 4 disabled
port 5 disabled
port 6 disabled
port 7 addr 2: high speed, power 500 mA, config 1, NCM-G102(0x6001),
NMGAAI00010200253N01253(0x2232), rev 0.02
uvideo0
port 8 addr 3: full speed, self powered, config 1, product
0x07dc(0x07dc), Intel(0x8087), rev 0.01
ugen0
port 9 disabled
port 10 disabled
port 11 disabled
port 12 disabled
port 13 disabled
port 14 disabled
port 15 disabled
direct to USB 3.0 port
*************************
$ usbdevs -vd
Controller /dev/usb0:
addr 1: super speed, self powered, config 1, xHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub0
port 1 disabled
port 2 disabled
port 3 disabled
port 4 disabled
port 5 disabled
port 6 disabled
port 7 addr 2: high speed, power 500 mA, config 1, NCM-G102(0x6001),
NMGAAI00010200253N01253(0x2232), rev 0.02
uvideo0
port 8 addr 3: full speed, self powered, config 1, product
0x07dc(0x07dc), Intel(0x8087), rev 0.01
ugen0
port 9 disabled
port 10 disabled
port 11 disabled
port 12 disabled
port 13 disabled
port 14 disabled
port 15 disabled
pcidump
**********
$ pcidump -v 0:20:0
0:20:0: Intel 9 Series xHCI
0x0000: Vendor ID: 8086 Product ID: 9cb1
0x0004: Command: 0106 Status: 0290
0x0008: Class: 0c Subclass: 03 Interface: 30 Revision: 03
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x00000000e1200000/0x00010000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 9cb1
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 8b Min Gnt: 00 Max Lat: 00
0x0070: Capability 0x01: Power Management
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
dmesg with XHCI_DEBUG
*******************************
OpenBSD 5.8-current (GENERIC.MP) #3: Fri Nov 20 15:50:27 UTC 2015
char...@mousse.my.domain:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17094049792 (16302MB)
avail mem = 16571830272 (15804MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x7ce42020 (9 entries)
bios0: vendor coreboot version "(null)" date 04/02/2015
bios0: GOOGLE Samus
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S2 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG SSDT
acpi0: wakeup devices HDEF(S3) WLAN(S3) EHCI(S3) XHCI(S3) ATPA(S3)
CODC(S3) LID0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 2400.74 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
GSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 2893.30 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
GSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 3 (application processor)
cpu2: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 2893.30 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
GSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 1, package 0
cpu3 at mainbus0: apid 2 (application processor)
cpu3: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 2893.30 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
GSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(700@148 mwait.1@0x33), C2(900@67 mwait.1@0x10),
C1(1000@0 mwait.1@0x1), PSS
acpicpu1 at acpi0: C3(700@148 mwait.1@0x33), C2(900@67 mwait.1@0x10),
C1(1000@0 mwait.1@0x1), PSS
acpicpu2 at acpi0: C3(700@148 mwait.1@0x33), C2(900@67 mwait.1@0x10),
C1(1000@0 mwait.1@0x1), PSS
acpicpu3 at acpi0: C3(700@148 mwait.1@0x33), C2(900@67 mwait.1@0x10),
C1(1000@0 mwait.1@0x1), PSS
acpitz0 at acpi0: critical temperature is 104 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "3487041" serial 809777200 type LION oem
"21484737139854675"
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
cpu0: Enhanced SpeedStep 2400 MHz: speeds: 2401, 2400, 1700, 1300, 900, 500
MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 2560x1700
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi
xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi
xhci0: xHCI version 1.0
xhci0: CAPLENGTH=0x80
xhci0: DOORBELL=0x3000
xhci0: RUNTIME=0x2000
xhci0: 32 bytes context
xhci0: supported page size 0x00000001
xhci0: 15 ports and 32 slots
xhci0: 16 scratch pages
xhci0: USB3PRM / USB3.0 configurable ports: 0x0000000f
xhci0: USB3_PSSEN / Enabled USB3.0 ports under xHCI: 0x0000000f
xhci0: XUSB2PRM / USB2.0 ports can switch from EHCI to xHCI:0x000004ff
xhci0: XUSB2PR / USB2.0 ports under xHCI: 0x000007ff
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
xhci0: DCBAAP=00x1ab3000
xhci0: CRCR=00 (0000000001ab4000)
xhci0: ERSTBA=00x7ce16000
xhci0: ERDP=00x1ab5000
xhci0: USBCMD=0x5
xhci0: IMAN=0x2
ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3
pci1 at ppb0 bus 1
iwm0 at pci1 dev 0 function 0 "Intel Dual Band Wireless AC 7260" rev 0xcb,
msi
pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, KINGSTON RBU-SUS, S9FM> SCSI3
0/direct fixed t10.ATA_KINGSTON_RBU-SUS151S364GD_50026B7E51D7488F_
sd0: 61057MB, 512 bytes/sector, 125045424 sectors, thin
"Intel 9 Series Thermal" rev 0x03 at pci0 dev 31 function 6 not configured
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16450, no fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
xhci0: port=7 change=0x80
xhci0: port=8 change=0x00
xhci0: port=7 change=0x80
xhci0: xhci_cmd_slot_control
xhci0: dev 1, input=0xffffff0001e56000 slot=0xffffff0001e56020
ep0=0xffffff0001e56040
xhci0: dev 1, setting DCBAA to 0x0000000001e57000
xhci_pipe_init: pipe=0xffff80000051b000 addr=0 depth=1 port=7 speed=3
dev 1 dci 1 (epAddr=0x0)
xhci0: xhci_cmd_set_address BSR=1
xhci0: xhci_cmd_set_address BSR=0
xhci0: dev 1 addr 1
uvideo0 at uhub0 port 7 configuration 1 interface 0
"NMGAAI00010200253N01253 NCM-G102" rev 2.00/0.02 addr 2
video0 at uvideo0
xhci0: port=8 change=0x00
xhci0: xhci_cmd_slot_control
xhci0: dev 2, input=0xffffff0001e59000 slot=0xffffff0001e59020
ep0=0xffffff0001e59040
xhci0: dev 2, setting DCBAA to 0x0000000001e5a000
xhci_pipe_init: pipe=0xffff8000006e3000 addr=0 depth=1 port=8 speed=2
dev 2 dci 1 (epAddr=0x0)
xhci0: xhci_cmd_set_address BSR=1
xhci0: xhci_cmd_set_address BSR=0
xhci0: dev 2 addr 2
ugen0 at uhub0 port 8 "Intel product 0x07dc" rev 2.00/0.01 addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd1: 16383MB, 512 bytes/sector, 33553904 sectors
root on sd1a (685567a3b591f896.a) swap on sd1b dump on sd1b
clock: unknown CMOS layout
iwm0: hw rev 0x140, fw ver 25.228 (API ver 9), address 6c:29:95:23:03:98
iwm0: could not initiate 2 GHz scan
Edward
