Hi all,
Trying to newfs an old 128MB flashcard on my OpenBSD 5.7, so I can
install OpenBSd on it to run on a Soekris.
# dmesg | grep sd0
sd0 at scsibus5 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI4
0/direct removable serial.0bda0309201209010309
sd0: 123MB, 512 bytes/sector, 251904 sectors
# disklabel sd0
# /dev/rsd0c:
type: SCSI
disk: vnd-a43c9e59
label:
duid: 770fe5cc30020c20
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 255
sectors/cylinder: 16065
cylinders: 15
total sectors: 251904
boundstart: 0
boundend: 0
drivedata: 0
3 partitions:
# size offset fstype [fsize bsize cpg]
a: 251840 64 4.2BSD 1024 8192 0
c: 251904 0 unused
# fdisk sd0
Disk: sd0 geometry: 15/255/63 [251904 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
-------------------------------------------------------------------------------
0: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
*3: A6 0 1 2 - 14 254 63 [ 64: 240911 ] OpenBSD
# newfs -S 512 /dev/rsd0a
/dev/rsd0a: 123.0MB in 251840 sectors of 512 bytes
4 cylinder groups of 30.74MB, 3935 blocks, 7872 inodes each
newfs: wtfs: write error on block 16: Input/output error
I tried 3 other 128MB flashcards, and a 32MB too, same results.
Any help will be highly appreciated, and if you need any additional info too.
Thanks
Monah
