Hi,
I'm running -current on Supermicro X9SCL-F with two on-board Gigabit
Intel (82579LM and 82574L)
and one PCI-e 4x Supermicro AOC-SG-I2 [0] (two port Intel 82575EB).
The question is why 82575EB doesn't support hwfeatures
(CSUM_TCPv4,CSUM_UDPv4 and VLAN_HWTAGGING) as 82579LM and 82574L.
Thanks.
[ns]~$ ifconfig em hwfeatures
em0: flags=18843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,MPSAFE> mtu 1500
hwfeatures=10<VLAN_MTU> hardmtu 9216
lladdr 00:25:90:38:f4:a0
priority: 0
groups: egress
media: Ethernet autoselect (100baseTX
full-duplex,rxpause,txpause)
status: active
inet XX.87.YY.ZZ netmask 0xffffffe0 broadcast XX.87.YY.255
em1:
flags=18b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST,MPSAFE>
mtu 1500
hwfeatures=10<VLAN_MTU> hardmtu 9216
lladdr 00:25:90:38:f4:a1
priority: 0
media: Ethernet autoselect (1000baseT
full-duplex,rxpause,txpause)
status: active
em2:
flags=18b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST,MPSAFE>
mtu 1500
hwfeatures=36<CSUM_TCPv4,CSUM_UDPv4,VLAN_MTU,VLAN_HWTAGGING>
hardmtu 9216
lladdr 00:25:90:d2:ab:3f
priority: 0
media: Ethernet autoselect (1000baseT
full-duplex,master,rxpause,txpause)
status: active
em3: flags=18802<BROADCAST,SIMPLEX,MULTICAST,MPSAFE> mtu 1500
hwfeatures=36<CSUM_TCPv4,CSUM_UDPv4,VLAN_MTU,VLAN_HWTAGGING>
hardmtu 9216
lladdr 00:25:90:d2:ab:3e
priority: 0
media: Ethernet autoselect (none)
status: no carrier
[0] http://www.supermicro.com/products/accessories/addon/AOC-SG-I2.cfm
[ns]~$ dmesg
OpenBSD 5.9 (GENERIC.MP) #1888: Fri Feb 26 01:20:19 MST 2016
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8544149504 (8148MB)
avail mem = 8281006080 (7897MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeb5a0 (55 entries)
bios0: vendor American Megatrends Inc. version "2.2" date 02/20/2015
bios0: TAROX Parx T100s G4
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG HPET SSDT SPMI SSDT SSDT DMAR
EINJ ERST HEST BERT
acpi0: wakeup devices PS2K(S4) PS2M(S4) UAR1(S4) UAR2(S4) P0P1(S4)
USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) USB6(S4) USB7
(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E31225 @ 3.10GHz, 3100.50 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,
SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,
NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 100MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E31225 @ 3.10GHz, 3100.02 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,
SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,
NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E31225 @ 3.10GHz, 3100.02 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,
SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,
NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E31225 @ 3.10GHz, 3100.02 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,
SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,
NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P0P1)
acpiprt2 at acpi0: bus 3 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus 4 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus 1 (PEG0)
acpiprt11 at acpi0: bus 2 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(350@104 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(350@104 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(350@104 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(350@104 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpipwrres1 at acpi0: FN01, resource for FAN1
acpipwrres2 at acpi0: FN02, resource for FAN2
acpipwrres3 at acpi0: FN03, resource for FAN3
acpipwrres4 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 99 degC
acpitz1 at acpi0: critical temperature is 99 degC
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD01
acpivout1 at acpivideo0: DD02
acpivout2 at acpivideo0: DD03
acpivout3 at acpivideo0: DD04
acpivout4 at acpivideo0: DD05
acpivout5 at acpivideo0: DD06
acpivout6 at acpivideo0: DD07
acpivout7 at acpivideo0: DD08
ipmi at mainbus0 not configured
cpu0: Enhanced SpeedStep 3100 MHz: speeds: 3101, 3100, 3000, 2900, 2800,
2700, 2600, 2500, 2300, 2200, 2100, 2000, 1900, 1800
, 1700, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 1 function 1 "Intel Core 2G PCIE" rev 0x09: msi
pci2 at ppb1 bus 2
em0 at pci2 dev 0 function 0 "Intel 82575EB" rev 0x02: msi, address
00:25:90:38:f4:a0
em1 at pci2 dev 0 function 1 "Intel 82575EB" rev 0x02: msi, address
00:25:90:38:f4:a1
em2 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x05: msi, address
00:25:90:d2:ab:3f
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 2
int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb5: msi
pci4 at ppb3 bus 4
em3 at pci4 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:25:90:d2:ab:3e
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 2
int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci5 at ppb4 bus 5
vga1 at pci5 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel C202 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi,
AHCI 1.3
ahci0: port 0: 3.0Gb/s
ahci0: port 2: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD5003ABYX-0, 01.0> SCSI3
0/direct fixed naa.50014ee002ec345b
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
sd1 at scsibus1 targ 2 lun 0: <ATA, WDC WD5003ABYX-0, 01.0> SCSI3
0/direct fixed naa.50014ee05841e02e
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic
2 int 18
iic0 at ichiic0
sdtemp0 at iic0 addr 0x19: stts2002
spdmem0 at iic0 addr 0x51: 8GB DDR3 SDRAM ECC PC3-10600 with thermal
sensor
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: console
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Winbond Electronics
Corp Hermon USB hidmouse Device" rev 1.10/0.01 addr
3
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub2 port 2 configuration 1 interface 1 "Winbond Electronics
Corp Hermon USB hidmouse Device" rev 1.10/0.01 addr
3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uftdi0 at uhub3 port 1 configuration 1 interface 0 "FTDI FT232R USB
UART" rev 2.00/6.00 addr 3
ucom0 at uftdi0 portno 1
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct
fixed
sd2: 476937MB, 512 bytes/sector, 976767473 sectors
root on sd2a (4f0020f200943c3c.a) swap on sd2b dump on sd2b
