I have the K8SE (non rack mount version) and I verified that the Broadcom NICs where not seen by either the amd64 or i386 RAMDISK kernels on the 3.8 release CDs. The Broadcom NIC is attached the the AMD 8131 HT-PCI bridge not the NForce junk. The K8SE has a Intel Pro/100 attached the the PCI-33 bus of the NForce, so I can get the machine up and run tests if needed.
Dustin Lundquist Chris Cappuccio wrote: > Maybe one of these is really supposed to be a PCI-PCI bridge. > > "Nvidia nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured > "Nvidia nForce4 ISA" rev 0xa3 at pci0 dev 1 function 0 not configured > "Nvidia nForce4 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured > > Kent Ho [EMAIL PROTECTED] wrote: > >>Same with current snapshot as well. Cannot detect the BCM5704 dual port >>NIC. >> >>Configure the network? [yes] >>No more interfaces to initialize. >> >>Here's the dmesg: >>OpenBSD 3.8-current (RAMDISK_CD) #627: Thu Jan 5 17:50:36 MST 2006 >> [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD >>real mem = 3488182272 (3406428K) >>avail mem = 2992111616 (2921984K) >>using 22937 buffers containing 349024256 bytes (340844K) of memory >>mainbus0 (root) >>cpu0 at mainbus0: (uniprocessor) >>cpu0: AMD Opteron(tm) Processor 248, 2210.44 MHz >>cpu0: >>FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW >>cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB >>64b/line 16-way L2 cache >>cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative >>cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative >>pci0 at mainbus0 bus 0: configuration mode 1 >>"Nvidia nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured >>"Nvidia nForce4 ISA" rev 0xa3 at pci0 dev 1 function 0 not configured >>"Nvidia nForce4 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured >>ohci0 at pci0 dev 2 function 0 "Nvidia nForce4 USB" rev 0xa2: irq 10, >>version 1.0, legacy support >>usb0 at ohci0: USB revision 1.0 >>uhub0 at usb0 >>uhub0: Nvidia OHCI root hub, rev 1.00/1.00, addr 1 >>uhub0: 10 ports with 10 removable, self powered >>pciide0 at pci0 dev 6 function 0 "Nvidia nForce4 IDE" rev 0xf2: DMA, >>channel 0 configured to compatibility, channel 1 configured to compatibility >>atapiscsi0 at pciide0 channel 0 drive 1 >>scsibus0 at atapiscsi0: 2 targets >>cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8525B, 1.02> SCSI0 >>5/cdrom removable >>cd0(pciide0:0:1): using PIO mode 4, DMA mode 2 >>pciide0: channel 1 disabled (no drives) >>pciide1 at pci0 dev 7 function 0 "Nvidia nForce4 SATA 1" rev 0xf3: DMA >>pciide1: using irq 11 for native-PCI interrupt >>pciide2 at pci0 dev 8 function 0 "Nvidia nForce4 SATA 2" rev 0xf3: DMA >>pciide2: using irq 10 for native-PCI interrupt >>wd0 at pciide2 channel 0 drive 0: <WDC WD1200JS-00MHB1> >>wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors >>wd0(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 5 >>wd1 at pciide2 channel 1 drive 0: <WDC WD1200JS-00MHB1> >>wd1: 16-sector PIO, LBA48, 114473MB, 234441648 sectors >>wd1(pciide2:1:0): using PIO mode 4, Ultra-DMA mode 5 >>ppb0 at pci0 dev 9 function 0 "Nvidia nForce4 PCI-PCI" rev 0xa2 >>pci1 at ppb0 bus 1 >>vga1 at pci1 dev 7 function 0 "ATI Rage XL" rev 0x27 >>wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >>ppb1 at pci0 dev 14 function 0 "Nvidia nForce4 PCIE" rev 0xa3 >>pci2 at ppb1 bus 2 >>pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00 >>pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00 >>pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 >>pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00 >>pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00 >>pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00 >>pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 >>pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00 >>isa0 at mainbus0 >>com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo >>com0: console >>com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo >>pckbc0 at isa0 port 0x60/5 >>pckbd0 at pckbc0 (kbd slot) >>pckbc0: using irq 1 for kbd slot >>wskbd0 at pckbd0: console keyboard, using wsdisplay0 >>rd0: fixed, 3584 blocks >>dkcsum: wd0 matches BIOS drive 0x80 >>wd1: no disk label >>dkcsum: wd1 matches BIOS drive 0x81 >>root on rd0a >>rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02 >>erase ^?, werase ^W, kill ^U, intr ^C, status ^T >>(I)nstall, (U)pgrade or (S)hell? >> >>thx. >> >>Kent. >> >>Kent Ho wrote: >> >>>Hi, >>> >>>I'm unable to install 3.8 on my remote box. It can pxeboot fine but >>>once 3.8 is booted up(bsd.rd) it cannot detect the BCM5704 dual port >>>NICs. Install via network is the only way for me at the moment. >>> >>>It has the following in the boot messages: >>>"Nvidia nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured >>>"Nvidia nForce4 ISA" rev 0xa3 at pci0 dev 1 function 0 not configured >>>"Nvidia nForce4 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured >>> >>>Could these be related? I did some search on the list, this may be >>>related to PCI-X support issue in Openbsd? The NIC is connected on the >>>"PCI-X Bridge A (133MHz)" according to the specs. >>> >>>http://www.tyan.com/products/html/thunderk8sre_spec.html >>> >>>I have the "S2891G2NR" model which has integrated GbE LAN (2) & SATA2 >>>controller. >>> >>>Any help would be appreciated. I have access to this box for limited >>>time for testing only. I'm hoping to adopt this m/b as a bridging >>>firewall with Openbsd. If you need any other info please let me know. >>> >>>Here the dmesg from pxeboot & bsd.rd via serial console: >>> >>>OpenBSD 3.8 (RAMDISK_CD) #472: Sat Sep 10 16:09:03 MDT 2005 >>> [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD >>>real mem = 3488182272 (3406428K) >>>avail mem = 2992402432 (2922268K) >>>using 22937 buffers containing 349024256 bytes (340844K) of memory >>>mainbus0 (root) >>>cpu0 at mainbus0: (uniprocessor) >>>cpu0: AMD Opteron(tm) Processor 248, 2210.48 MHz >>>cpu0: >>>FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW >>> >>> >>>cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB >>>64b/line 16-way L2 cache >>>cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully >>>associative >>>cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully >>>associative >>>pci0 at mainbus0 bus 0: configuration mode 1 >>>"Nvidia nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured >>>"Nvidia nForce4 ISA" rev 0xa3 at pci0 dev 1 function 0 not configured >>>"Nvidia nForce4 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured >>>ohci0 at pci0 dev 2 function 0 "Nvidia nForce4 USB" rev 0xa2: irq 10, >>>version 1.0, legacy support >>>usb0 at ohci0: USB revision 1.0 >>>uhub0 at usb0 >>>uhub0: Nvidia OHCI root hub, rev 1.00/1.00, addr 1 >>>uhub0: 10 ports with 10 removable, self powered >>>pciide0 at pci0 dev 6 function 0 "Nvidia nForce4 IDE" rev 0xf2: DMA, >>>channel 0 configured to compatibility, channel 1 configured to >>>compatibility >>>atapiscsi0 at pciide0 channel 0 drive 1 >>>scsibus0 at atapiscsi0: 2 targets >>>cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8525B, 1.02> SCSI0 >>>5/cdrom removable >>>cd0(pciide0:0:1): using PIO mode 4, DMA mode 2 >>>pciide0: channel 1 disabled (no drives) >>>pciide1 at pci0 dev 7 function 0 "Nvidia nForce4 SATA 1" rev 0xf3: DMA >>>pciide1: using irq 11 for native-PCI interrupt >>>pciide2 at pci0 dev 8 function 0 "Nvidia nForce4 SATA 2" rev 0xf3: DMA >>>pciide2: using irq 10 for native-PCI interrupt >>>wd0 at pciide2 channel 0 drive 0: <WDC WD1200JS-00MHB1> >>>wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors >>>wd0(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 5 >>>wd1 at pciide2 channel 1 drive 0: <WDC WD1200JS-00MHB1> >>>wd1: 16-sector PIO, LBA48, 114473MB, 234441648 sectors >>>wd1(pciide2:1:0): using PIO mode 4, Ultra-DMA mode 5 >>>ppb0 at pci0 dev 9 function 0 "Nvidia nForce4 PCI-PCI" rev 0xa2 >>>pci1 at ppb0 bus 1 >>>vga1 at pci1 dev 7 function 0 "ATI Rage XL" rev 0x27 >>>wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >>>ppb1 at pci0 dev 14 function 0 "Nvidia nForce4 PCIE" rev 0xa3 >>>pci2 at ppb1 bus 2 >>>pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00 >>>pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00 >>>pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 >>>pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00 >>>pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00 >>>pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00 >>>pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 >>>pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00 >>>isa0 at mainbus0 >>>com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo >>>com0: console >>>com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo >>>pckbc0 at isa0 port 0x60/5 >>>pckbd0 at pckbc0 (kbd slot) >>>pckbc0: using irq 1 for kbd slot >>>wskbd0 at pckbd0: console keyboard, using wsdisplay0 >>>rd0: fixed, 3584 blocks >>>dkcsum: wd0 matches BIOS drive 0x80 >>>wd1: no disk label >>>dkcsum: wd1 matches BIOS drive 0x81 >>>root on rd0a >>>rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02 >>>erase ^?, werase ^W, kill ^U, intr ^C, status ^T >>>(I)nstall, (U)pgrade or (S)hell? >>> >>> >>>The box works normally with centos3.x and centos4.x and sees the NICs as: >>>tg3.c:v3.27-rh (May 5, 2005) >>>ACPI: PCI interrupt 0000:0a:09.0[A] -> GSI 28 (level, low) -> IRQ 217 >>>divert: allocating divert_blk for eth0 >>>eth0: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] >>>(PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:31:74:72 >>>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] >>>TSOcap[1] >>>ACPI: PCI interrupt 0000:0a:09.1[B] -> GSI 29 (level, low) -> IRQ 225 >>>divert: allocating divert_blk for eth1 >>>eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] >>>(PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:31:74:73 >>>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] >>>TSOcap[1] >>> >>> >>>many thanks. >>>Kent.
