Hello,
I have this usb2.0 dongle, TP-LINK TL-WN722N wireless device. I've got
it after I installed OpenBSD so I have run fw_update -a for firmware.
Still I get this error athn0: could not load firmware after plugin.
The manual page says it should be an error number in message, but it
is not.
Wiki chipset page says it contains Atheros AR9002U as a chipset and
AR9271 as a wireless chipset. The manual says support exists for
AR9271, but AR9002U is not mentioned. The device shows in pictures
only one chip marked AR9271.
In one CVS message back in 2010 by Daniel Bergamini, it says AR9002U
is supported along many others.
Should I consider it as non supported, please?
Thanks
dmesg & usbdev
OpenBSD 5.9-current (GENERIC.MP) #2005: Thu May 5 18:04:12 MDT 2016
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8029429760 (7657MB)
avail mem = 7781482496 (7421MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xeebc0 (57 entries)
bios0: vendor LENOVO version "9VKT33AUS" date 09/11/2013
bios0: LENOVO 1990RZ2
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC TCPA MCFG SLIC MCFG HPET SSDT
acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4)
PCE7(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) SBAZ(S4) PS2K(S3)
PS2M(S3) P0PC(S4) PE20(S4) PE21(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) II X2 B26 Processor, 3194.52 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: AMD erratum 721 detected and fixed
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) II X2 B26 Processor, 3192.01 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu1: AMD erratum 721 detected and fixed
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 3 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimcfg1 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus -1 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE3)
acpiprt4 at acpi0: bus -1 (PCE4)
acpiprt5 at acpi0: bus -1 (PCE5)
acpiprt6 at acpi0: bus -1 (PCE6)
acpiprt7 at acpi0: bus -1 (PCE7)
acpiprt8 at acpi0: bus -1 (PCE9)
acpiprt9 at acpi0: bus -1 (PCEA)
acpiprt10 at acpi0: bus 2 (P0PC)
acpiprt11 at acpi0: bus 3 (PE20)
acpiprt12 at acpi0: bus -1 (PE21)
acpiprt13 at acpi0: bus -1 (PE22)
acpiprt14 at acpi0: bus 4 (PE23)
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
"PNP0501" at acpi0 not configured
"PNP0C31" at acpi0 not configured
acpibtn0 at acpi0: PWRB
cpu0: 3194 MHz: speeds: 3200 2500 1900 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 unknown vendor 0x17aa product 0x9602 rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 5 function 0 "ATI Radeon HD 4250" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 3 int 18
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 3 int
19, AHCI 1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD3200AAKS-0, 40.0> SCSI3
0/direct fixed naa.50014ee1018094dc
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DH16ABSH, YL32> ATAPI
5/cdrom removable
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 3 int
18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 3 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 3 int
18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 3 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 3 int 16
azalia0: codecs: Realtek ALC662
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb1 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci2 at ppb1 bus 2
ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 3 int
18, version 1.0, legacy support
ppb2 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci0 dev 21 function 3 "ATI SB800 PCIE" rev 0x00
pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM5761" rev 0x10, BCM5761 A1
(0x5761100): msi, address c8:9c:dc:b2:8f:1d
brgphy0 at bge0 phy 1: BCM5761 10/100/1000baseT PHY, rev. 0
ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 3 int
18, version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 3 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci3: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
uvideo0 at uhub0 port 4 configuration 1 interface 0 " Webcam C170" rev
2.00/28.25 addr 2
video0 at uvideo0
uaudio0 at uhub0 port 4 configuration 1 interface 2 " Webcam C170" rev
2.00/28.25 addr 2
uaudio0: audio rev 1.00, 2 mixer controls
audio1 at uaudio0
athn0 at uhub2 port 1 configuration 1 interface 0 "ATHEROS USB2.0
WLAN" rev 2.00/1.08 addr 2
uhidev0 at uhub3 port 5 configuration 1 interface 0 "Genius USB
Optical Mouse" rev 2.00/1.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub4 port 1 configuration 1 interface 0 "SIGMACH1P USB
Keykoard" rev 1.10/1.10 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev2 at uhub4 port 1 configuration 1 interface 1 "SIGMACH1P USB
Keykoard" rev 1.10/1.10 addr 2
uhidev2: iclass 3/0, 2 report ids
uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (6acc27ad669abd49.a) swap on sd0b dump on sd0b
radeondrm0: 1680x1050
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
athn0: could not load firmware
athn0 detached
athn0 at uhub2 port 1 configuration 1 interface 0 "ATHEROS USB2.0
WLAN" rev 2.00/1.08 addr 2
athn0: could not load firmware
athn0 detached
-------------
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
ATI(0x1002), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 addr 2: high speed, power 500 mA, config 1, Webcam
C170(0x082b), (0x046d), rev 28.25
port 5 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
ATI(0x1002), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
Controller /dev/usb2:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
ATI(0x1002), rev 1.00
port 1 addr 2: high speed, power 500 mA, config 1, USB2.0
WLAN(0x9271), ATHEROS(0x0cf3), rev 1.08, iSerialNumber 12345
port 2 powered
port 3 powered
port 4 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
ATI(0x1002), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 addr 2: low speed, power 100 mA, config 1, USB Optical
Mouse(0x003a), Genius(0x0458), rev 1.00
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
ATI(0x1002), rev 1.00
port 1 addr 2: low speed, power 98 mA, config 1, USB
Keykoard(0x000e), SIGMACH1P(0x1c4f), rev 1.10
port 2 powered
port 3 powered
port 4 powered
port 5 powered
Controller /dev/usb5:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
ATI(0x1002), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb6:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
ATI(0x1002), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
