Greetings misc@ (Marco in particular! :),
I am having some unusual issues with bioctl while using an ami-based
RAID card.
The card is a LSI/Symbios MegaRAID 150-4 (FW 713N) in a 64-bit PCI slot.
Drives are Seagate SATA drives. Case is a Supermicro 5033C-T with
built-in drive cage.
Currently we are having a two-drive RAID-1 mirrored array with one hot
spare drive.
When we first setup the array and installed openbsd, bioctl ami0
produced output just like you would expect. When I simulated a failure,
the array started to rebuild. Good! Except that when I reinserted
another drive to become the new hotspare, it did not show in bioctl output.
After a reboot, the drive did show in bioctl output as unused, so I set
it as hot spare (bioctl -H 0:1 ami0). After doing this, bioctl did not
show the drive as a hot spare, but still as unusued. After yet another
reboot, the controller's BIOS did show the extra drive as a hot spare.
Can you provide any insight into what could be going on?
Many thanks!
random info below:
# bioctl -Dv ami0
bioctl: cookie = 0xd1753e80
bio_inq
Volume Status Size Device
ami0 0 Degraded 160036814848 sd0 RAID1
0 Online 160036814848 0:0.0 noencl < ST3160812AS
2AAA>
' 5LS0MNEY'
1 Rebuild 160036814848 0:2.0 noencl < ST3160812AS
2AAA>
' 5LS0MNG5'
ami0 1 Unused 160036814848 0:1.0 noencl < ST3160812AS
2AAA>
' 5LS0NEKN'
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
real mem = 1072193536 (1047064K)
avail mem = 971747328 (948972K)
using 4278 buffers containing 53710848 bytes (52452K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(91) BIOS, date 03/09/05, BIOS32 rev. 0 @ 0xfb790
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf64
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde60/240 (13 entries)
pcibios0: PCI Exclusive IRQs: 5 7 9 10 11 12
pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x25a1
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x2200
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82875P Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82875P AGP" rev 0x02
pci1 at ppb0 bus 1
ppb1 at pci0 dev 3 function 0 "Intel 82875P PCI-CSA" rev 0x02
pci2 at ppb1 bus 2
em0 at pci2 dev 1 function 0 "Intel PRO/1000CT (82547GI)" rev 0x00: irq
10, address: 00:30:48:82:95:02
ppb2 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci3 at ppb2 bus 3
ami0 at pci3 dev 1 function 0 "Symbios Logic MegaRAID" rev 0x01: irq 9
LSI 523/64b/lhc
ami0: FW 713N, BIOS vG119, 64MB RAM
ami0: 1 channels, 0 FC loops, 1 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 152623MB, 19456 cyl, 255 head, 63 sec, 512 bytes/sec, 312571904 sec
total
scsibus1 at ami0: 16 targets
vendor "Marvell", unknown product 0x5041 (class mass storage subclass
RAID, rev 0x00) at pci3 dev 4 function 0 not configured
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x0a
pci4 at ppb3 bus 4
trm0 at pci4 dev 2 function 0 "Tekram DC-3x5U" rev 0x01: irq 11
scsibus2 at trm0: 8 targets
trm0: target 0 using 8 bit 10.0 MHz, Offset 15 data transfers
st0 at scsibus2 targ 0 lun 0: <ARCHIVE, Python 04106-XXX, 7600> SCSI2
1/sequential removable
st0: drive empty or not ready
vga1 at pci4 dev 9 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em1 at pci4 dev 10 function 0 "Intel PRO/1000MT (82541GI)" rev 0x00: irq
5, address: 00:30:48:82:95:03
ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 6300ESB SATA" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 1: <ST3160812AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus3 at atapiscsi0: 2 targets
cd0 at scsibus3 targ 0 lun 0: <LITE-ON, DVD SOHD-16P9SV, F$01> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 6300ESB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fbc5 netmask ffe5 ttymask ffe7
pctr: user-level cycle counter enabled
dkcsum: sd0 matches BIOS drive 0x80
dkcsum: wd0 matches BIOS drive 0x81
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
