Hi,
I have a few problems with HP t520 Thin Client Business Desktop (dmesg
below) on an unpatched OpenBSD 5.9 x64.
Less important one is that without xorg.conf ATI graphics card works
only in VESA mode.
More important one is that xfreerdp does not work in fullscreen mode
when started with the following command from xterm in openbox:
xfreerdp /v:rdp.example.org /f /kbd:0x0000081A /d:example.org /sec:rdp
Actually freerdp does start and screen flashes for a moment, ps shows
it as running, but I don't see anything on the screen.
After I lower the resolution and revert it back with xrandr, xfreerdp
works as expected in fullscreen:
xrandr -s 1280x1024 && xrandr -s 1920x1080
Any idea why this happens? Could it be repaired?
Thank you in advance.
OpenBSD 5.9 (GENERIC.MP) #1888: Fri Feb 26 01:20:19 MST 2016
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3669352448 (3499MB)
avail mem = 3553943552 (3389MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xebfc0 (21 entries)
bios0: vendor AMI version "L41 v01.06" date 10/26/2015
bios0: Hewlett-Packard HP t520 Flexible Series TC
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT SSDT DBGP SSDT
SSDT SSDT
acpi0: wakeup devices LOM_(S3) SBAZ(S3) EHC3(S3) XHC0(S3) EHC1(S3)
EHC2(S3)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD GX-212JC SOC with Radeon(TM) R2E Graphics, 1197.90 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPC
NT,AES,XSAVE,AVX,F16C,RDRAND,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPI
CSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully
associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully
associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD GX-212JC SOC with Radeon(TM) R2E Graphics, 1197.75 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPC
NT,AES,XSAVE,AVX,F16C,RDRAND,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPI
CSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 1MB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully
associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully
associative
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 3 pa 0xfec00000, version 21, 24 pins
ioapic1 at mainbus0: apid 4 pa 0xfec01000, version 21, 32 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (BR11)
acpiprt2 at acpi0: bus -1 (GPP0)
acpiprt3 at acpi0: bus 1 (GPP1)
acpiprt4 at acpi0: bus -1 (GPP2)
acpiprt5 at acpi0: bus -1 (GPP3)
acpicpu0 at acpi0: C2(0@400 io@0x414), C1(@1 halt!), PSS
acpicpu1 at acpi0: C2(0@400 io@0x414), C1(@1 halt!), PSS
acpibtn0 at acpi0: PWRB
cpu0: 1197 MHz: speeds: 1200 1000 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 16h Root Complex" rev 0x00
vga1 at pci0 dev 1 function 0 vendor "ATI", unknown product 0x9856 rev
0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 1 function 1 "ATI Radeon HD Audio" rev 0x00: msi
azalia0: no supported codecs
pchb1 at pci0 dev 2 function 0 "AMD AMD64 16h Host" rev 0x00
ppb0 at pci0 dev 2 function 3 "AMD AMD64 16h PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G
(0x4c00), msi, address 48:0f:cf:be:cc:af
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
"AMD CCP" rev 0x00 at pci0 dev 8 function 0 not configured
xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x11: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "AMD xHCI root hub" rev 3.00/1.00 addr 1
ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: msi, AHCI
1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SDSA6MM-, U221> SCSI3
0/direct fixed naa.5001b444a4b5edfb
sd0: 7641MB, 512 bytes/sector, 15649200 sectors, thin
ehci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB2" rev 0x39: apic 3
int 18
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "AMD EHCI root hub" rev 2.00/1.00 addr 1
ehci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB2" rev 0x39: apic 3
int 18
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 "AMD EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x42: SMBus
disabled
azalia1 at pci0 dev 20 function 2 "AMD Hudson-2 HD Audio" rev 0x02:
apic 3 int 16
azalia1: codecs: Realtek ALC221
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
pchb2 at pci0 dev 24 function 0 "AMD AMD64 16h Link Cfg" rev 0x00
pchb3 at pci0 dev 24 function 1 "AMD AMD64 16h Address Map" rev 0x00
pchb4 at pci0 dev 24 function 2 "AMD AMD64 16h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 16h Misc Cfg" rev 0x00
pchb5 at pci0 dev 24 function 4 "AMD AMD64 16h CPU Power" rev 0x00
pchb6 at pci0 dev 24 function 5 "AMD AMD64 16h Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub3 at uhub1 port 1 "Advanced Micro Devices product 0x7900" rev
2.00/0.18 addr 2
uhidev0 at uhub3 port 3 configuration 1 interface 0 "NOVATEK USB
Keyboard" rev 1.10/1.04 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 3 configuration 1 interface 1 "NOVATEK USB
Keyboard" rev 1.10/1.04 addr 3
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
uhidev2 at uhub3 port 4 configuration 1 interface 0 "PixArt HP USB
Optical Mouse" rev 2.00/1.00 addr 4
uhidev2: iclass 3/1
ums0 at uhidev2: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhub4 at uhub2 port 1 "Advanced Micro Devices product 0x7900" rev
2.00/0.18 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (9dc8463f053abdb2.a) swap on sd0b dump on sd0b
--
Before enlightenment - chop wood, draw water.
After enlightenment - chop wood, draw water.
Marko Cupać
https://www.mimar.rs/
