Re: dmesg for Lenovo Thinkpad x200 w/Libreboot

[Scott Bonds]

I'm able to boot to OpenBSD on a CDROM (well, technically an Isostick)
and install from there. I haven't had any luck with booting an OpenBSD
install where I setup full disk encryption. First I tried a whole disk
MBR install, then I tried creating an EFI volume plus an encrypted
volume. The installs went fine, I just haven't figured out how to bend
Libreboot's Grub2 to my will. Whatever I try with chainloader, I always
get the same error message: "error: unrecognised payload type."

With whole disk I tried grub commands like:

grub> chainloader (ahci0,msdos1)+1

With my EFI setup I tried:

grub> chainloader (ahci0,openbsd1)/efi/boot/bootx64.efi

I'm really just taking mostly blind stabs in the dark, as the Grub2 docs
don't have much to say, as far as I've been able to find, on
chainloader. I've read the OpenBSD FAQ on booting amd64 but didn't find
anything that switched on a light in my head as yet. I'll keep reading
docs and poking around to see if I can get it to boot. It seems so
close, having installed 'successfully' and knowing that it runs ok on an
unencrypted volume.

Someone else posted an (unanswered) question about the error message I'm
running into, implying that chainloader command might be broken for
Libreboot.  So there's that.

On 09/26, Scott Bonds wrote:

I have a Lenovo ThinkPad x200 running OpenBSD 6.0 with an unencrypted
drive. I flashed it to use Libreboot and then booted it up by running
this on the GRUB2 command line:

# kopenbsd -r sd0a (ahci0,openbsd1)/bsd
# boot

I haven't tested it extensively, but at first blush things seem to be
working just fine. Wifi works, X works, apmd works, brightness keys
don't seem to work. I think I need to boot to linux to update the grub
config and add OpenBSD to the boot menu, I haven't figured out a way to
do that from OpenBSD.

I'm going to try swapping in an encrypted drive from another machine and
see if I can get that booting up. Maybe I need to chain the OpenBSD
bootloader instead of using kopenbsd, we'll see. Or perhaps I can get
the install process working of a USB drive. Anyway, I'll let y'all know
once I've tried a few more things, but I thought I'd share what I have
so far.

bcced dmesg@

Here's the dmesg and sensor output:

OpenBSD 6.0 (GENERIC.MP) #2319: Tue Jul 26 13:00:43 MDT 2016
  dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4004118528 (3818MB)
avail mem = 3879006208 (3699MB)
warning: no entropy supplied by boot loader
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xbfaa0020 (9 entries)
bios0: vendor coreboot version "CBET4000 a02e567-dirty" date 08/18/2016
bios0: LENOVO 745434U
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT MCFG TCPA APIC DMAR HPET
acpi0: wakeup devices HDEF(S4) USB1(S4) USB2(S4) USB3(S4) EHC1(S4) USB4(S4) 
USB5(S4) USB6(S4) EHC2(S4) SLT1(S4) SLT2(S4) SLT3(S4) SLT6(S4) LANC(S3) 
LANR(S3) SLPB(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 CPU P8700 @ 2.53GHz, 1600.33 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 266MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU P8700 @ 2.53GHz, 1600.06 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu1: 3MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGP)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 2 (RP02)
acpiprt4 at acpi0: bus 3 (RP03)
acpiprt5 at acpi0: bus 4 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus 5 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0
C1: bogo buffer
C2: bogo buffer
C3: bogo buffer: C1(@1 halt!), PSS
acpicpu1 at acpi0
C1: bogo buffer
C2: bogo buffer
C3: bogo buffer: C1(@1 halt!), PSS
acpitz0 at acpi0: critical temperature is 127 degC
acpitz1 at acpi0: critical temperature is 99 degC
acpithinkpad0 at acpi0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "COMPATIBLE" serial 18729 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
"PNP0303" at acpi0 not configured
"PNP0F13" at acpi0 not configured
"WACF004" at acpi0 not configured
acpidock0 at acpi0: DOCK not docked (0)
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: LCD0
cpu0: Enhanced SpeedStep 1600 MHz: speeds: 2534, 2533, 1600, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: msi
inteldrm0: 1280x800
error: [drm:pid0:intel_pipe_config_compare] *ERROR* mismatch in 
adjusted_mode.flags(DRM_MODE_FLAG_PHSYNC) (expected 0, found 1)
pipe state doesn't match!
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M" rev 0x03: msi, address 
00:1f:16:2c:e0:df
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 17
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: Conexant CX20561
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03
pci2 at ppb1 bus 2
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO 1T2R, 
MoW, address 00:1e:65:ea:86:64
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03
pci4 at ppb3 bus 4
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 17
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 16
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci5 at ppb4 bus 5
pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
ahci0: port 0: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST9640322AS, 0001> SCSI3 0/direct fixed 
naa.5000c50021b5f20e
sd0: 610480MB, 512 bytes/sector, 1250263728 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 18
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
/dev/ksyms: Symbol table not valid.
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Lenovo product 0x480c" rev 
2.00/31.34 addr 2
video0 at uvideo0
ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
ugen1 at uhub3 port 2 "Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data 
Rate II" rev 2.00/3.99 addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root device: use one of: exit em0 iwn0 sd0[a-p]
root device: sd0a
swap device (default sd0b): root on sd0a swap on sd0b dump on sd0b
clock: unknown CMOS layout
error: [drm:pid44516:intel_pipe_config_compare] *ERROR* mismatch in 
adjusted_mode.flags(DRM_MODE_FLAG_PHSYNC) (expected 0, found 1)
pipe state doesn't match!
syncing disks... done
rebooting...
OpenBSD 6.0 (GENERIC.MP) #2319: Tue Jul 26 13:00:43 MDT 2016
  dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4004118528 (3818MB)
avail mem = 3879006208 (3699MB)
warning: no entropy supplied by boot loader
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xbfaa0020 (9 entries)
bios0: vendor coreboot version "CBET4000 a02e567-dirty" date 08/18/2016
bios0: LENOVO 745434U
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT MCFG TCPA APIC DMAR HPET
acpi0: wakeup devices HDEF(S4) USB1(S4) USB2(S4) USB3(S4) EHC1(S4) USB4(S4) 
USB5(S4) USB6(S4) EHC2(S4) SLT1(S4) SLT2(S4) SLT3(S4) SLT6(S4) LANC(S3) 
LANR(S3) SLPB(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 CPU P8700 @ 2.53GHz, 1600.36 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 266MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU P8700 @ 2.53GHz, 1600.07 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu1: 3MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGP)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 2 (RP02)
acpiprt4 at acpi0: bus 3 (RP03)
acpiprt5 at acpi0: bus 4 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus 5 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0
C1: bogo buffer
C2: bogo buffer
C3: bogo buffer: C1(@1 halt!), PSS
acpicpu1 at acpi0
C1: bogo buffer
C2: bogo buffer
C3: bogo buffer: C1(@1 halt!), PSS
acpitz0 at acpi0: critical temperature is 127 degC
acpitz1 at acpi0: critical temperature is 99 degC
acpithinkpad0 at acpi0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "COMPATIBLE" serial 18729 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
"PNP0303" at acpi0 not configured
"PNP0F13" at acpi0 not configured
"WACF004" at acpi0 not configured
acpidock0 at acpi0: DOCK not docked (0)
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: LCD0
cpu0: Enhanced SpeedStep 1600 MHz: speeds: 2534, 2533, 1600, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: msi
inteldrm0: 1280x800
error: [drm:pid0:intel_pipe_config_compare] *ERROR* mismatch in 
adjusted_mode.flags(DRM_MODE_FLAG_PHSYNC) (expected 0, found 1)
pipe state doesn't match!
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M" rev 0x03: msi, address 
00:1f:16:2c:e0:df
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 17
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: Conexant CX20561
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03
pci2 at ppb1 bus 2
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO 1T2R, 
MoW, address 00:1e:65:ea:86:64
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03
pci4 at ppb3 bus 4
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 17
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 16
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci5 at ppb4 bus 5
pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
ahci0: port 0: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST9640322AS, 0001> SCSI3 0/direct fixed 
naa.5000c50021b5f20e
sd0: 610480MB, 512 bytes/sector, 1250263728 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 18
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
/dev/ksyms: Symbol table not valid.
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Lenovo product 0x480c" rev 
2.00/31.34 addr 2
video0 at uvideo0
ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
ugen1 at uhub3 port 2 "Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data 
Rate II" rev 2.00/3.99 addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (1241389a24b31cd1.a) swap on sd0b dump on sd0b
clock: unknown CMOS layout
hw.sensors.cpu0.temp0=30.00 degC
hw.sensors.acpitz0.temp0=40.00 degC (zone temperature)
hw.sensors.acpitz1.temp0=51.00 degC (zone temperature)
hw.sensors.acpithinkpad0.temp0=40.00 degC
hw.sensors.acpithinkpad0.temp1=51.00 degC
hw.sensors.acpithinkpad0.temp2=51.00 degC
hw.sensors.acpithinkpad0.temp3=51.00 degC
hw.sensors.acpithinkpad0.temp4=51.00 degC
hw.sensors.acpithinkpad0.temp5=51.00 degC
hw.sensors.acpithinkpad0.temp6=51.00 degC
hw.sensors.acpithinkpad0.temp7=51.00 degC
hw.sensors.acpithinkpad0.fan0=3619 RPM
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.acpibat0.volt0=10.80 VDC (voltage)
hw.sensors.acpibat0.volt1=12.29 VDC (current voltage)
hw.sensors.acpibat0.power0=33.74 W (rate)
hw.sensors.acpibat0.watthour0=67.46 Wh (last full capacity)
hw.sensors.acpibat0.watthour1=3.37 Wh (warning capacity)
hw.sensors.acpibat0.watthour2=0.20 Wh (low capacity)
hw.sensors.acpibat0.watthour3=56.87 Wh (remaining capacity), OK
hw.sensors.acpibat0.watthour4=68.04 Wh (design capacity)
hw.sensors.acpibat0.raw0=2 (battery charging), OK
hw.sensors.acpibtn1.indicator0=On (lid open)
hw.sensors.acpidock0.indicator0=Off (not docked), UNKNOWN
hw.sensors.aps0.temp0=51.00 degC
hw.sensors.aps0.temp1=51.00 degC
hw.sensors.aps0.indicator0=On (Keyboard Active)
hw.sensors.aps0.indicator1=Off (Mouse Active)
hw.sensors.aps0.indicator2=On (Lid Open)
hw.sensors.aps0.raw0=494 (X_ACCEL)
hw.sensors.aps0.raw1=476 (Y_ACCEL)
hw.sensors.aps0.raw2=494 (X_VAR)
hw.sensors.aps0.raw3=475 (Y_VAR)