Dear List! I've found in the man page of ping the following: "If less than eight bytes of pad are specified, no round trip times are given." However I experienced that round trip times are shown *only* when I give packetsize >= 24 to the ping. This is the case whether I did the ping as root or as another user.
I've found on Web CVS Repository of OpenBSD that the latest version of ping.c (1.217) contains the following lines:" struct tv64 { u_int64_t tv64_sec; u_int64_t tv64_nsec; }; struct payload { struct tv64tv64; u_int8_t mac[SIPHASH_DIGEST_LENGTH]; }; if (datalen >= sizeof(struct payload)) /* can we time transfer */ timing = 1; " I think that this is the explanation of my experience and maybe the man page should be corrected. This is my first e-mail to this list and I am not a programmer just a network engineer. So I am sorry, but I can not send a diff. I'v just installed OpenBSD6.0 in a VirtualBox and I did not updated the fresh install (so my source of ping maybe not version 1.217). But I copy the dmesg below $ dmesg OpenBSD 6.0 (GENERIC) #2148: Tue Jul 26 12:55:20 MDT 2016 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 4278124544 (4079MB) avail mem = 4144046080 (3952MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe1000 (10 entries) bios0: vendor innotek GmbH version "VirtualBox" date 12/01/2006 bios0: innotek GmbH VirtualBox acpi0 at bios0: rev 2 acpi0: sleep states S0 S5 acpi0: tables DSDT FACP APIC SSDT acpi0: wakeup devices acpitimer0 at acpi0: 3579545 Hz, 32 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2195.04 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,RDRAND,NXE,LONG,LAHF,ABM,3DNOWP,ITSC,RDSEED cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: CPU supports MTRRs but not enabled by BIOS cpu0: apic clock running at 1019MHz cpu0: mwait min=64, max=64 ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0: C1(@1 halt!) "PNP0303" at acpi0 not configured "PNP0F03" at acpi0 not configured acpibat0 at acpi0: BAT0 model "1" serial 0 type VBOX oem "innotek" acpiac0 at acpi0: AC unit online acpivideo0 at acpi0: GFX0 pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02 pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00 pciide0 at pci0 dev 1 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <VBOX HARDDISK> wd0: 128-sector PIO, LBA, 2048MB, 4194304 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) vga1 at pci0 dev 2 function 0 "InnoTek VirtualBox Graphics Adapter" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) em0 at pci0 dev 3 function 0 "Intel 82540EM" rev 0x02: apic 1 int 19, address 08:00:27:43:02:53 "InnoTek VirtualBox Guest Service" rev 0x00 at pci0 dev 4 function 0 not configured auich0 at pci0 dev 5 function 0 "Intel 82801AA AC97" rev 0x01: apic 1 int 21, ICH AC97 ac97: codec id 0x83847600 (SigmaTel STAC9700) audio0 at auich0 ohci0 at pci0 dev 6 function 0 "Apple Intrepid USB" rev 0x00: apic 1 int 22, version 1.0 piixpm0 at pci0 dev 7 function 0 "Intel 82371AB Power" rev 0x08: SMBus disabled isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 "Apple OHCI root hub" rev 1.00/1.00 addr 1 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (35819a56b501e167.a) swap on wd0b dump on wd0b WARNING: / was not properly unmounted $ I apologize if I send my message to a wrong list. My intention was to help a little. Regards, Tamas Horvath