Sorry for the delay. In the BIOS I have found, 'USB Controller' with 3 options : Sets the USB controller to On with BIOS Support, On Without BIOS Support, or Off. If you have a PS/2 keyboard attached, On Without BIOS Support disables BIOS USB support. If you do not have a PS/2 keyboard attached and select On Without BIOS Support, USB mouse and keyboard devices function only during the boot process. When set to On With BIOS Support, USB mouse and keyboard devices are controlled by the BIOS until an operating system driver is loaded.
But none are working. Any other ideas ? -----Message d'origine----- De : Brian A. Seklecki [mailto:[EMAIL PROTECTED] Envoyi : lundi 5 dicembre 2005 02:11 @ : Xavier Millihs-Lacroix Cc : misc@openbsd.org Objet : Re: Annoying echoes in console DRAC III/XT on DELL Poweredge The thing emulates a USB keyboard. Trying toggling legacy emulation mode in the BIOS. ~BAS On Thu, 2005-12-01 at 03:55, Xavier Millihs-Lacroix wrote: > Hello, > > I 'm trying to install OBSD 3.8 on a Dell Poweredge 750 server using > the Card DRAC III/XT (provides remote console/screen). > But each time a ket is pushed I have the letter repetead on the console. > I have put the last firmware for the DRAC Card. > > I have search by didn't find any answer .... > > I can't install remotely OBSD ! > > Do you have already met this issue ? > > Is it a java problem (the remote access is done via http and a java > virtual > machine) ? > > Xavier.