Hi,
I purchased a new PC-Engines APU 2c4 system. I have a wireless card
as well and a msata SSD (250 gig). I've tried the install with all
these two boards installed, none installed and both combinations with
no change in symptoms.
I have tried
OpenBSD current "install60.fs"
OpenBSD 6.0 miniroot60.fs
OpenBSD 6.0 install60.fs
I'm using another OpenBSD box hooked up to the serial port (null
modem) and "cu" at 115200.
From what I can tell, it's got the latest BIOS for the apu2.
The BIOS prompts work fine, I get the "boot>" prompt in OpenBSD, but
right after the "entry point" line prints out, the system reboots. It
will do this endlessly. I have run the on-board memtest with and
without the wireless and SSD and it all passes.
The system boots the "TinyCore Linux" system that PC-Engines provides
on their website. I have included a dmesg from it at the bottom.
Sorry it's so long!
Any hints on what I should do to troubleshoot this further?
Where the problem is:
-------------------------------
boot>
cannot open hd0a:/etc/random.seed: No such file or directory
booting hd0a:/6.0/amd64/bsd.rd: 3396956+1430528+3876632+0+606208
[72+431976+281268]=0x9914e8
entry point at 0x1001000 [7205c766, 34000004, 24448b12, 3550a304]
<reboots here>
Entire boot transcript
---------------------
Script started on Tue Jan 10 14:12:46 2017
# cu -ltty00 -s115200
Connected
PCEngines apu2
coreboot build 20160307
4080 MB ECC DRAM
SeaBIOS (version ?-20160307_153453-michael-desktop64)
Found mainboard PC Engines PCEngines apu2
multiboot: eax=0, ebx=0
boot order:
1: /pci@i0cf8/usb@10/usb-*@1
2: /pci@i0cf8/usb@10/usb-*@2
3: /pci@i0cf8/usb@10/usb-*@3
4: /pci@i0cf8/usb@10/usb-*@4
5: /pci@i0cf8/*@14,7
6: /pci@i0cf8/*@11/drive@0/disk@0
7: /pci@i0cf8/*@11/drive@1/disk@0
8: /rom@genroms/pxe.rom
9: pxen0
10: scon1
11:
Found 21 PCI devices (max PCI bus is 03)
Copying SMBIOS entry point from 0xdffb7000 to 0x000f3110
Copying ACPI RSDP from 0xdffb8000 to 0x000f30e0
Copying MPTABLE from 0xdffdc000/dffdc010 to 0x000f2f30
Copying PIR from 0xdffdd000 to 0x000f2f00
Using pmtimer, ioport 0x818
Scan for VGA option rom
Running option rom at c000:0003
Google, Inc.
Serial Graphics Adapter 08/22/15
SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $
(wiv@coreboot-Virtual-Machine) Sat Aug 22 09:25:30 UTC 2015
Term: 80x25
IO4 0
Turning on vga text mode console
SeaBIOS (version ?-20160307_153453-michael-desktop64)
XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32
byte contexts
XHCI extcap 0x1 @ feb22500
XHCI protocol USB 3.00, 2 ports (offset 1), def 0
XHCI protocol USB 2.00, 2 ports (offset 3), def 10
XHCI extcap 0xa @ feb22540
Found 2 serial ports
ATA controller 1 at 4010/4020/0 (irq 0 dev 88)
EHCI init on dev 00:13.0 (regs=0xfeb25420)
ATA controller 2 at 4018/4024/0 (irq 0 dev 88)
Searching bootorder for: /pci@i0cf8/*@14,7
Searching bootorder for: /rom@img/memtest
Searching bootorder for: /rom@img/setup
ata0-0: Samsung SSD 850 EVO mSATA 250GB ATA-9 Hard-Disk (232 GiBytes)
Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0
XHCI port #3: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
Searching bootorder for: /pci@i0cf8/usb@10/storage@3/*@0/*@0,0
Searching bootorder for: /pci@i0cf8/usb@10/usb-*@3
USB MSC vendor='CBM' product='Flash Disk' rev='5.00' type=0 removable=1
USB MSC blksize=512 sectors=2064384
Initialized USB HUB (0 ports used)
All threads complete.
Scan for option roms
PCengines Press F10 key now for boot menu:
Select boot device:
1. USB MSC Drive CBM Flash Disk 5.00
2. ata0-0: Samsung SSD 850 EVO mSATA 250GB ATA-9 Hard-Disk (23
3. Payload [memtest]
4. Payload [setup]
Searching bootorder for: HALT
drive 0x000f2e60: PCHS=0/0/0 translation=lba LCHS=1024/32/63 s=2064384
drive 0x000f2e90: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
s=488397168
Space available for UMB: c1000-ef000, f0000-f2e60
Returned 258048 bytes of ZoneHigh
e820 map has 7 items:
0: 0000000000000000 - 000000000009f800 = 1 RAM
1: 000000000009f800 - 00000000000a0000 = 2 RESERVED
2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
3: 0000000000100000 - 00000000dffad000 = 1 RAM
4: 00000000dffad000 - 00000000e0000000 = 2 RESERVED
5: 00000000f8000000 - 00000000fc000000 = 2 RESERVED
6: 0000000100000000 - 000000011f000000 = 1 RAM
enter handle_19:
NULL
Booting from Hard Disk...
Booting from 0000:7c00
Using drive 0, partition 3.
Loading......
probing: pc0 com0 com1 mem[638K 3582M 496M a20=on]
disk: hd0+ hd1+*
>> OpenBSD/amd64 BOOT 3.33
boot>
cannot open hd0a:/etc/random.seed: No such file or directory
booting hd0a:/6.0/amd64/bsd.rd: 3396956+1430528+3876632+0+606208
[72+431976+281268]=0x9914e8
entry point at 0x1001000 [7205c766, 34000004, 24448b12, 3550a304]
****
**** Automatic Reboot :(
****
PCEngines apu2
coreboot build 20160307
4080 MB ECC DRAM
SeaBIOS (version ?-20160307_153453-michael-desktop64)
Found mainboard PC Engines PCEngines apu2
multiboot: eax=0, ebx=0
boot order:
1: /pci@i0cf8/usb@10/usb-*@1
2: /pci@i0cf8/usb@10/usb-*@2
3: /pci@i0cf8/usb@10/usb-*@3
4: /pci@i0cf8/usb@10/usb-*@4
5: /pci@i0cf8/*@14,7
6: /pci@i0cf8/*@11/drive@0/disk@0
7: /pci@i0cf8/*@11/drive@1/disk@0
8: /rom@genroms/pxe.rom
9: pxen0
10: scon1
11:
Found 21 PCI devices (max PCI bus is 03)
...
...
...
TinyCore Linux dmesg
------------------------------
[+54.0 C][root@box:~]$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.9-tinycore (tc@box) (gcc version
5.2.0 (GCC) ) #1 SMP Wed Jul 20 09:14:08 UTC 2016
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating
point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is
0x340 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff]
usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffacfff]
usable
[ 0.000000] BIOS-e820: [mem 0x00000000dffad000-0x00000000dfffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff]
usable
[ 0.000000] Notice: NX (Execute Disable) protection cannot be
enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: PC Engines apu2/apu2, BIOS 88a4f96 03/07/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==>
reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xdffad max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 base 00FF800000 mask FFFF800000 write-protect
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000011f000000 aka 4592M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000f2f30-0x000f2f3f]
mapped at [c00f2f30]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x00bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 4M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x36ffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x36ffffff] page 4M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x008c0000, 0x008c0fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7ed23000-0x7fffffff]
[ 0.000000] Allocated new RAMDISK: [mem 0x36521000-0x377fd20d]
[ 0.000000] Move RAMDISK from [mem 0x7ed23000-0x7ffff20d] to [mem
0x36521000-0x377fd20d]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F30E0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000DFFB80E0 00005C (v01 CORE COREBOOT
00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000DFFB96F0 0000F4 (v04 CORE COREBOOT
00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000DFFB8250 001496 (v02 AMD COREBOOT
00010001 INTL 20140114)
[ 0.000000] ACPI: FACS 0x00000000DFFB8210 000040
[ 0.000000] ACPI: SSDT 0x00000000DFFB97F0 000045 (v02 CORE COREBOOT
0000002A CORE 0000002A)
[ 0.000000] ACPI: APIC 0x00000000DFFB9840 00007E (v01 CORE COREBOOT
00000000 CORE 00000000)
[ 0.000000] ACPI: HEST 0x00000000DFFB98C0 0001D0 (v01 CORE COREBOOT
00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 0x00000000DFFB9A90 0048A6 (v02 AMD AGESA
00000002 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000DFFBE340 0007C8 (v01 AMD AGESA
00000001 AMD 00000001)
[ 0.000000] ACPI: HPET 0x00000000DFFBEB10 000038 (v01 CORE COREBOOT
00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2695MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x008c1000, 0x008c1fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff]
[ 0.000000] HighMem [mem 0x00000000377fe000-0x00000000dffacfff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dffacfff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000001000-0x00000000dffacfff]
[ 0.000000] On node 0 totalpages: 917323
[ 0.000000] free_area_init_node: node 0, pgdat c07ac880,
node_mem_map f4921020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 690095 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x818
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000,
GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000,
GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI
devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 17 pages/cpu @f48cb000 s38604 r0
d31028 u69632
[ 0.000000] pcpu-alloc: s38604 r0 d31028 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 915547
[ 0.000000] Kernel command line: BOOT_IMAGE=vmlinuz
console=ttyS0,115200n8 priority=low initrd=core.gz superuser quiet
noswap nodhcp embed nozswap blacklist=
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7,
524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:000dffad)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 3612144K/3669292K available (5094K kernel code,
427K rwdata, 1344K rodata, 552K init, 472K bss, 57148K reserved, 0K
cma-reserved, 2760380K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc07b7000 - 0xc0841000 ( 552 kB)
.data : 0xc05f9e42 - 0xc07b5f40 (1776 kB)
.text : 0xc0100000 - 0xc05f9e42 (5095 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32,
nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:1000 16
[ 0.000000] CPU 0 irqstacks, hard=f4408000 soft=f440a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 998.099 MHz processor
[ 0.000028] Calibrating delay loop (skipped), value calculated
using timer frequency.. 1996.37 BogoMIPS (lpj=3326996)
[ 0.000036] pid_max: default: 32768 minimum: 301
[ 0.000055] ACPI: Core revision 20150619
[ 0.023647] ACPI: All ACPI Tables successfully acquired
[ 0.023766] Mount-cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 0.023772] Mountpoint-cache hash table entries: 2048 (order: 1,
8192 bytes)
[ 0.024473] Initializing cgroup subsys blkio
[ 0.024482] Initializing cgroup subsys devices
[ 0.024489] Initializing cgroup subsys freezer
[ 0.024496] Initializing cgroup subsys net_cls
[ 0.024505] Initializing cgroup subsys perf_event
[ 0.024513] Initializing cgroup subsys net_prio
[ 0.024570] CPU: Physical Processor ID: 0
[ 0.024573] CPU: Processor Core ID: 0
[ 0.024582] mce: CPU supports 6 MCE banks
[ 0.024599] LVT offset 1 assigned for vector 0xf9
[ 0.024613] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.024617] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[ 0.025821] Freeing SMP alternatives memory: 20K (c0841000 - c0846000)
[ 0.027484] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.028162] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.166200] smpboot: CPU0: AMD GX-412TC SOC (fam: 16, model: 30,
stepping: 01)
[ 0.166252] Performance Events: AMD PMU driver.
[ 0.166264] ... version: 0
[ 0.166267] ... bit width: 48
[ 0.166269] ... generic registers: 4
[ 0.166272] ... value mask: 0000ffffffffffff
[ 0.166274] ... max period: 00007fffffffffff
[ 0.166276] ... fixed-purpose events: 0
[ 0.166279] ... event mask: 000000000000000f
[ 0.167396] CPU 1 irqstacks, hard=f44a0000 soft=f44a2000
[ 0.167400] x86: Booting SMP configuration:
[ 0.167403] .... node #0, CPUs: #1
[ 0.169183] Initializing CPU#1
[ 0.171921] CPU 2 irqstacks, hard=f44b2000 soft=f44b4000
[ 0.171953] #2
[ 0.172978] Initializing CPU#2
[ 0.175652] CPU 3 irqstacks, hard=f44c4000 soft=f44c6000
[ 0.175659] #3
[ 0.176700] Initializing CPU#3
[ 0.179019] x86: Booted up 1 node, 4 CPUs
[ 0.179025] smpboot: Total of 4 processors activated (7987.49
BogoMIPS)
[ 0.183969] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.184171] pinctrl core: initialized pinctrl subsystem
[ 0.184980] NET: Registered protocol family 16
[ 0.192899] cpuidle: using governor ladder
[ 0.206240] cpuidle: using governor menu
[ 0.206799] ACPI: bus type PCI registered
[ 0.206803] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.207112] PCI: PCI BIOS revision 2.10 entry at 0xfd5f3, last bus=4
[ 0.207116] PCI: Using configuration type 1 for base access
[ 0.207118] PCI: Using configuration type 1 for extended access
[ 0.227497] ACPI: Added _OSI(Module Device)
[ 0.227502] ACPI: Added _OSI(Processor Device)
[ 0.227519] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.227537] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.233151] ACPI: Executed 1 blocks of module-level executable AML
code
[ 0.246932] ACPI: Interpreter enabled
[ 0.247001] ACPI: (supports S0 S1 S2 S3 S4 S5)
[ 0.247005] ACPI: Using IOAPIC for interrupt routing
[ 0.247049] HEST: Table parsing has been initialized.
[ 0.247059] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.257878] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.257909] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI]
[ 0.258331] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME
PCIeCapability]
[ 0.258519] acpi PNP0A08:00: host bridge window expanded to [io
0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored
[ 0.259043] PCI host bridge to bus 0000:00
[ 0.259051] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.259057] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7
window]
[ 0.259063] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff
window]
[ 0.259068] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff]
[ 0.259074] pci_bus 0000:00: root bus resource [mem
0x000c0000-0x000dffff]
[ 0.259079] pci_bus 0000:00: root bus resource [mem
0xe0000000-0xffffffff]
[ 0.259101] pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
[ 0.259473] pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
[ 0.259848] pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
[ 0.259959] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 0.260195] pci 0000:00:02.2: System wakeup disabled by ACPI
[ 0.260337] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
[ 0.260503] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.260707] pci 0000:00:02.3: System wakeup disabled by ACPI
[ 0.260876] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
[ 0.261041] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.261214] pci 0000:00:02.4: System wakeup disabled by ACPI
[ 0.261494] pci 0000:00:02.5: [1022:1439] type 01 class 0x060400
[ 0.261690] pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
[ 0.261807] pci 0000:00:02.5: System wakeup disabled by ACPI
[ 0.262020] pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
[ 0.262058] pci 0000:00:08.0: reg 0x10: [mem 0xfeb00000-0xfeb1ffff
64bit pref]
[ 0.262072] pci 0000:00:08.0: reg 0x18: [mem 0xfe900000-0xfe9fffff]
[ 0.262085] pci 0000:00:08.0: reg 0x1c: [mem 0xfeb24000-0xfeb24fff]
[ 0.262128] pci 0000:00:08.0: reg 0x20: [mem 0xfea00000-0xfeafffff]
[ 0.262141] pci 0000:00:08.0: reg 0x24: [mem 0xfeb20000-0xfeb21fff]
[ 0.262483] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.262598] pci 0000:00:10.0: reg 0x10: [mem 0xfeb22000-0xfeb23fff
64bit]
[ 0.262765] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.263001] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.263129] pci 0000:00:11.0: [1022:7800] type 00 class 0x01018f
[ 0.263166] pci 0000:00:11.0: reg 0x10: [io 0x4010-0x4017]
[ 0.263182] pci 0000:00:11.0: reg 0x14: [io 0x4020-0x4023]
[ 0.263197] pci 0000:00:11.0: reg 0x18: [io 0x4018-0x401f]
[ 0.263211] pci 0000:00:11.0: reg 0x1c: [io 0x4024-0x4027]
[ 0.263226] pci 0000:00:11.0: reg 0x20: [io 0x4000-0x400f]
[ 0.263271] pci 0000:00:11.0: reg 0x24: [mem 0xfeb25000-0xfeb253ff]
[ 0.263341] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.263365] pci 0000:00:11.0: PME# supported from D3hot
[ 0.263722] pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
[ 0.263788] pci 0000:00:13.0: reg 0x10: [mem 0xfeb25400-0xfeb254ff]
[ 0.263914] pci 0000:00:13.0: supports D1 D2
[ 0.263919] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.264085] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.264275] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.264738] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.265093] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
[ 0.265140] pci 0000:00:14.7: reg 0x10: [mem 0xfeb25500-0xfeb255ff
64bit]
[ 0.265576] pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
[ 0.265926] pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
[ 0.266240] pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
[ 0.266578] pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
[ 0.266901] pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
[ 0.267240] pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
[ 0.267722] pci 0000:01:00.0: [8086:157b] type 00 class 0x020000
[ 0.267816] pci 0000:01:00.0: reg 0x10: [mem 0xfe500000-0xfe51ffff]
[ 0.267853] pci 0000:01:00.0: reg 0x18: [io 0x1000-0x101f]
[ 0.267890] pci 0000:01:00.0: reg 0x1c: [mem 0xfe520000-0xfe523fff]
[ 0.268061] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.275323] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 0.275363] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
[ 0.275371] pci 0000:00:02.2: bridge window [mem
0xfe500000-0xfe5fffff]
[ 0.275573] pci 0000:02:00.0: [8086:157b] type 00 class 0x020000
[ 0.275665] pci 0000:02:00.0: reg 0x10: [mem 0xfe600000-0xfe61ffff]
[ 0.275703] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x201f]
[ 0.275781] pci 0000:02:00.0: reg 0x1c: [mem 0xfe620000-0xfe623fff]
[ 0.275970] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.285323] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 0.285364] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
[ 0.285372] pci 0000:00:02.3: bridge window [mem
0xfe600000-0xfe6fffff]
[ 0.285703] pci 0000:03:00.0: [8086:157b] type 00 class 0x020000
[ 0.285796] pci 0000:03:00.0: reg 0x10: [mem 0xfe700000-0xfe71ffff]
[ 0.285860] pci 0000:03:00.0: reg 0x18: [io 0x3000-0x301f]
[ 0.285909] pci 0000:03:00.0: reg 0x1c: [mem 0xfe720000-0xfe723fff]
[ 0.286065] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.295366] pci 0000:00:02.4: PCI bridge to [bus 03]
[ 0.295405] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
[ 0.295413] pci 0000:00:02.4: bridge window [mem
0xfe700000-0xfe7fffff]
[ 0.295642] pci 0000:04:00.0: [168c:002a] type 00 class 0x028000
[ 0.295704] pci 0000:04:00.0: reg 0x10: [mem 0xfe800000-0xfe80ffff
64bit]
[ 0.295964] pci 0000:04:00.0: supports D1
[ 0.295969] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
[ 0.296175] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe
device. You can enable it with 'pcie_aspm=force'
[ 0.296191] pci 0000:00:02.5: PCI bridge to [bus 04]
[ 0.296206] pci 0000:00:02.5: bridge window [mem
0xfe800000-0xfe8fffff]
[ 0.296302] pci_bus 0000:00: on NUMA node 0
[ 0.297066] ACPI: PCI Interrupt Link [INTA] (IRQs *3 5 7 10 11 12 15)
[ 0.297274] ACPI: PCI Interrupt Link [INTB] (IRQs *3 5 7 10 11 12 15)
[ 0.297448] ACPI: PCI Interrupt Link [INTC] (IRQs 3 *5 7 10 11 12 15)
[ 0.297623] ACPI: PCI Interrupt Link [INTD] (IRQs 3 5 *7 10 11 12 15)
[ 0.297854] ACPI: PCI Interrupt Link [INTE] (IRQs 3 5 7 10 *11 12 15)
[ 0.298028] ACPI: PCI Interrupt Link [INTF] (IRQs 3 5 7 *10 11 12 15)
[ 0.298244] ACPI: Enabled 4 GPEs in block 00 to 1F
[ 0.298511] vgaarb: loaded
[ 0.298825] SCSI subsystem initialized
[ 0.299063] libata version 3.00 loaded.
[ 0.299190] ACPI: bus type USB registered
[ 0.299266] usbcore: registered new interface driver usbfs
[ 0.299340] usbcore: registered new interface driver hub
[ 0.299399] usbcore: registered new device driver usb
[ 0.299458] Linux video capture interface: v2.00
[ 0.299538] pps_core: LinuxPPS API ver. 1 registered
[ 0.299541] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giome...@linux.it>
[ 0.299553] PTP clock support registered
[ 0.299824] PCI: Using ACPI for IRQ routing
[ 0.299831] PCI: pci_cache_line_size set to 64 bytes
[ 0.299956] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.299962] e820: reserve RAM buffer [mem 0xdffad000-0xdfffffff]
[ 0.301162] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.301173] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.304280] clocksource: Switched to clocksource hpet
[ 0.304568] pnp: PnP ACPI init
[ 0.305012] system 00:00: [mem 0xfec10002-0xfec11001] has been
reserved
[ 0.305024] system 00:00: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 0.305177] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.305323] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.305686] pnp: PnP ACPI: found 3 devices
[ 0.305691] PnPBIOS: Disabled by ACPI PNP
[ 0.345293] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns
[ 0.345351] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 0.345359] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
[ 0.345368] pci 0000:00:02.2: bridge window [mem
0xfe500000-0xfe5fffff]
[ 0.345412] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 0.345419] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
[ 0.345428] pci 0000:00:02.3: bridge window [mem
0xfe600000-0xfe6fffff]
[ 0.345471] pci 0000:00:02.4: PCI bridge to [bus 03]
[ 0.345477] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
[ 0.345487] pci 0000:00:02.4: bridge window [mem
0xfe700000-0xfe7fffff]
[ 0.345499] pci 0000:00:02.5: PCI bridge to [bus 04]
[ 0.345509] pci 0000:00:02.5: bridge window [mem
0xfe800000-0xfe8fffff]
[ 0.345523] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.345529] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.345535] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.345540] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.345546] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
[ 0.345551] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.345557] pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 0.345562] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.345568] pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 0.345602] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.345608] pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.345613] pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.345822] NET: Registered protocol family 2
[ 0.346329] TCP established hash table entries: 8192 (order: 3,
32768 bytes)
[ 0.346379] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.346460] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.346523] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.346553] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.346716] NET: Registered protocol family 1
[ 0.346965] RPC: Registered named UNIX socket transport module.
[ 0.346969] RPC: Registered udp transport module.
[ 0.346971] RPC: Registered tcp transport module.
[ 0.346974] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.354524] PCI: CLS 64 bytes, default 64
[ 0.354760] Trying to unpack rootfs image as initramfs...
[ 1.981762] Freeing initrd memory: 19316K (f6521000 - f77fe000)
[ 1.982487] perf: AMD NB counters detected
[ 1.982492] perf: AMD L2I counters detected
[ 1.982637] LVT offset 0 assigned for vector 0x400
[ 1.982673] perf: AMD IBS detected (0x000000ff)
[ 1.982733] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 1.982736] apm: disabled - APM is not SMP safe.
[ 1.984217] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.985926] NFS: Registering the id_resolver key type
[ 1.985981] Key type id_resolver registered
[ 1.985983] Key type id_legacy registered
[ 1.985994] nfs4filelayout_init: NFSv4 File Layout Driver
Registering...
[ 1.986019] fuse init (API version 7.23)
[ 1.987664] NET: Registered protocol family 38
[ 1.987843] bounce: pool size: 64 pages
[ 1.987886] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 250)
[ 1.987892] io scheduler noop registered
[ 1.987895] io scheduler deadline registered (default)
[ 1.989972] pcieport 0000:00:02.2: Signaling PME through PCIe PME
interrupt
[ 1.989978] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.989986] pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme
loaded
[ 1.990076] pcieport 0000:00:02.3: Signaling PME through PCIe PME
interrupt
[ 1.990081] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.990118] pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme
loaded
[ 1.990170] pcieport 0000:00:02.4: Signaling PME through PCIe PME
interrupt
[ 1.990175] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.990184] pcie_pme 0000:00:02.4:pcie01: service driver pcie_pme
loaded
[ 1.990263] pcieport 0000:00:02.5: Signaling PME through PCIe PME
interrupt
[ 1.990268] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 1.990275] pcie_pme 0000:00:02.5:pcie01: service driver pcie_pme
loaded
[ 1.990293] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.990316] pciehp: PCI Express Hot Plug Controller Driver version:
0.4
[ 1.990616] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.990627] ACPI: Power Button [PWRB]
[ 1.990916] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.990923] ACPI: Power Button [PWRF]
[ 1.991141] ACPI: acpi_idle registered with cpuidle
[ 1.992638] GHES: Failed to enable APEI firmware first mode.
[ 1.992754] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.992833] isapnp: Scanning for PnP cards...
[ 2.013630] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
is a 16550A
[ 2.034651] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud =
115200) is a 16550A
[ 2.035731] Non-volatile memory driver v1.3
[ 2.035787] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180
seconds, margin is 60 seconds).
[ 2.040780] brd: module loaded
[ 2.041069] mtip32xx Version 1.3.1
[ 2.041595] zram: Added device: zram0
[ 2.041702] VMware PVSCSI driver - version 1.0.5.0-k
[ 2.042025] ahci 0000:00:11.0: version 3.0
[ 2.042403] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6
Gbps 0x3 impl SATA mode
[ 2.042413] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led
clo pmp fbs pio slum part
[ 2.043639] scsi host0: ahci
[ 2.044100] scsi host1: ahci
[ 2.044310] ata1: SATA max UDMA/133 abar m1024@0xfeb25000 port
0xfeb25100 irq 19
[ 2.044316] ata2: SATA max UDMA/133 abar m1024@0xfeb25000 port
0xfeb25180 irq 19
[ 2.049188] scsi host2: pata_legacy
[ 2.049414] ata3: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[ 2.353522] isapnp: No Plug & Play device found
[ 2.364513] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.531231] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.532798] ata1.00: supports DRM functions and may not be fully
accessible
[ 2.533239] ata1.00: disabling queued TRIM support
[ 2.533247] ata1.00: ATA-9: Samsung SSD 850 EVO mSATA 250GB,
EMT41B6Q, max UDMA/133
[ 2.533254] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth
31/32), AA
[ 2.534009] ata1.00: supports DRM functions and may not be fully
accessible
[ 2.534316] ata1.00: disabling queued TRIM support
[ 2.534797] ata1.00: configured for UDMA/133
[ 2.535201] scsi 0:0:0:0: Direct-Access ATA Samsung SSD
850 1B6Q PQ: 0 ANSI: 5
[ 2.536117] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks:
(250 GB/232 GiB)
[ 2.536237] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.536451] sd 0:0:0:0: [sda] Write Protect is off
[ 2.536459] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.536520] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.538112] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.539533] scsi host3: pata_legacy
[ 2.539823] ata4: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[ 2.692521] libphy: Fixed MDIO Bus: probed
[ 2.692525] tun: Universal TUN/TAP device driver, 1.6
[ 2.692527] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 2.692583] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.692615] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.692682] e1000: Intel(R) PRO/1000 Network Driver - version
7.3.21-k8-NAPI
[ 2.692685] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.692809] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
[ 2.692811] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.692944] igb: Intel(R) Gigabit Ethernet Network Driver - version
5.2.18-k
[ 2.692946] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 2.725594] pps pps0: new PPS source ptp0
[ 2.725601] igb 0000:01:00.0: added PHC on eth0
[ 2.725605] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network
Connection
[ 2.725611] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1)
00:0d:b9:44:62:7c
[ 2.725616] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
[ 2.725621] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx
queue(s), 4 tx queue(s)
[ 2.758211] pps pps1: new PPS source ptp1
[ 2.758217] igb 0000:02:00.0: added PHC on eth1
[ 2.758221] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network
Connection
[ 2.758227] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1)
00:0d:b9:44:62:7d
[ 2.758231] igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF
[ 2.758236] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx
queue(s), 4 tx queue(s)
[ 2.790453] pps pps2: new PPS source ptp2
[ 2.790459] igb 0000:03:00.0: added PHC on eth2
[ 2.790463] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network
Connection
[ 2.790470] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x1)
00:0d:b9:44:62:7e
[ 2.790489] igb 0000:03:00.0: eth2: PBA No: FFFFFF-0FF
[ 2.790508] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx
queue(s), 4 tx queue(s)
[ 2.790595] igbvf: Intel(R) Gigabit Virtual Function Network Driver
- version 2.0.2-k
[ 2.790598] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 2.790680] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver -
version 4.0.1-k
[ 2.790682] ixgbe: Copyright (c) 1999-2014 Intel Corporation.
[ 2.790756] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual
Function Network Driver - version 2.12.1-k
[ 2.790759] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 2.790811] i40e: Intel(R) Ethernet Connection XL710 Network Driver
- version 1.3.4-k
[ 2.790814] i40e: Copyright (c) 2013 - 2014 Intel Corporation.
[ 2.790908] ixgb: Intel(R) PRO/10GbE Network Driver - version
1.0.135-k2-NAPI
[ 2.790911] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 2.790994] i40evf: Intel(R) XL710/X710 Virtual Function Network
Driver - version 1.2.25
[ 2.790997] Copyright (c) 2013 - 2014 Intel Corporation.
[ 2.791047] Intel(R) Ethernet Switch Host Interface Driver -
version 0.15.2-k
[ 2.791050] Copyright (c) 2013 Intel Corporation.
[ 2.791514] PPP generic driver version 2.4.2
[ 2.791626] PPP Deflate Compression module registered
[ 2.791631] NET: Registered protocol family 24
[ 2.791806] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.791810] ehci-pci: EHCI PCI platform driver
[ 2.792046] ehci-pci 0000:00:13.0: EHCI Host Controller
[ 2.792072] ehci-pci 0000:00:13.0: new USB bus registered, assigned
bus number 1
[ 2.792085] ehci-pci 0000:00:13.0: applying AMD
SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.792100] ehci-pci 0000:00:13.0: debug port 2
[ 2.792166] ehci-pci 0000:00:13.0: irq 18, io mem 0xfeb25400
[ 2.801214] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
[ 2.801770] hub 1-0:1.0: USB hub found
[ 2.801827] hub 1-0:1.0: 2 ports detected
[ 2.802248] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.802257] ohci-pci: OHCI PCI platform driver
[ 2.802302] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.802454] usbcore: registered new interface driver uas
[ 2.802510] usbcore: registered new interface driver usb-storage
[ 2.802538] usbcore: registered new interface driver ums-alauda
[ 2.802597] usbcore: registered new interface driver ums-cypress
[ 2.802655] usbcore: registered new interface driver ums-datafab
[ 2.802713] usbcore: registered new interface driver ums_eneub6250
[ 2.802741] usbcore: registered new interface driver ums-freecom
[ 2.802769] usbcore: registered new interface driver ums-isd200
[ 2.802829] usbcore: registered new interface driver ums-jumpshot
[ 2.802917] usbcore: registered new interface driver ums-karma
[ 2.802950] usbcore: registered new interface driver ums-onetouch
[ 2.802983] usbcore: registered new interface driver ums-sddr09
[ 2.803042] usbcore: registered new interface driver ums-sddr55
[ 2.803071] usbcore: registered new interface driver ums-usbat
[ 2.803190] usbcore: registered new interface driver usbserial
[ 2.803222] usbcore: registered new interface driver usbserial_generic
[ 2.803246] usbserial: USB Serial support registered for generic
[ 2.803275] usbcore: registered new interface driver cp210x
[ 2.803299] usbserial: USB Serial support registered for cp210x
[ 2.803415] i8042: PNP: No PS/2 controller found. Probing ports
directly.
[ 2.981231] tsc: Refined TSC clocksource calibration: 998.127 MHz
[ 2.981240] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x1cc65b93289, max_idle_ns: 881590487074 ns
[ 3.873751] i8042: No controller found
[ 3.876610] mousedev: PS/2 mouse device common for all mice
[ 3.876923] usbcore: registered new interface driver appletouch
[ 3.877026] usbcore: registered new interface driver bcm5974
[ 3.877440] usbcore: registered new interface driver synaptics_usb
[ 3.877523] rtc_cmos 00:01: RTC can wake from S4
[ 3.877833] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 3.877872] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram,
hpet irqs
[ 3.878122] intel_powerclamp: Intel powerclamp does not run on
family 22 model 48
[ 3.884437] softdog: Software Watchdog Timer: 0.08 initialized.
soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[ 3.884465] sdhci: Secure Digital Host Controller Interface driver
[ 3.884467] sdhci: Copyright(c) Pierre Ossman
[ 3.884557] sdhci-pci 0000:00:14.7: SDHCI controller found
[1022:7813] (rev 1)
[ 3.884594] sdhci-pci 0000:00:14.7: found 1 slot(s)
[ 3.884857] sdhci [sdhci_add_host()]: mmc0: Auto-CMD23 unavailable
[ 3.884863] sdhci-pci 0000:00:14.7: No vmmc regulator found
[ 3.884867] sdhci-pci 0000:00:14.7: No vqmmc regulator found
[ 3.885082] sdhci: =========== REGISTER DUMP (mmc0)===========
[ 3.885089] sdhci: Sys addr: 0x00000000 | Version: 0x00001001
[ 3.885094] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[ 3.885099] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[ 3.885104] sdhci: Present: 0x01f20000 | Host ctl: 0x00000000
[ 3.885108] sdhci: Power: 0x00000000 | Blk gap: 0x00000000
[ 3.885113] sdhci: Wake-up: 0x00000000 | Clock: 0x00000000
[ 3.885118] sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
[ 3.885123] sdhci: Int enab: 0x00ff0003 | Sig enab: 0x00ff0003
[ 3.885128] sdhci: AC12 err: 0x00000000 | Slot int: 0x000000ff
[ 3.885133] sdhci: Caps: 0x31fe3fb2 | Caps_1: 0x00002570
[ 3.885138] sdhci: Cmd: 0x00000000 | Max curr: 0x00c80064
[ 3.885141] sdhci: Host ctl2: 0x00000000
[ 3.885147] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000
[ 3.885149] sdhci: ===========================================
[ 3.885382] mmc0: clock 0Hz busmode 2 powermode 0 cs 0 Vdd 0 width
0 timing 0
[ 3.886414] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
64-bit
[ 3.886425] mmc0: frequency set to 0 in disable function, this
means the clock is already disabled.
[ 3.886503] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.886538] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.887014] AMD Cryptographic Coprocessor 0000:00:08.0: 5 command
queues available
[ 3.887622] AMD Cryptographic Coprocessor 0000:00:08.0: enabled
[ 3.888643] cmac(aes) ahash algorithm registration error (-22)
[ 3.893320] Driver for HIFN 795x crypto accelerator chip has been
successfully registered.
[ 3.893420] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.893532] usbcore: registered new interface driver usbhid
[ 3.893534] usbhid: USB HID core driver
[ 3.893788] Netfilter messages via NETLINK v0.30.
[ 3.893794] nfnl_acct: registering with nfnetlink.
[ 3.893952] ipip: IPv4 over IPv4 tunneling driver
[ 3.894601] IPv4 over IPsec tunneling driver
[ 3.895016] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.895299] Initializing XFRM netlink socket
[ 3.895311] NET: Registered protocol family 17
[ 3.895327] NET: Registered protocol family 15
[ 3.895401] Key type dns_resolver registered
[ 3.896589] Using IPI No-Shortcut mode
[ 3.898290] registered taskstats version 1
[ 3.899326] rtc_cmos 00:01: setting system clock to 2016-03-07
17:22:10 UTC (1457371330)
[ 3.900444] Freeing unused kernel memory: 552K (c07b7000 - c0841000)
[ 3.900928] Write protecting the kernel text: 5096k
[ 3.901050] Write protecting the kernel read-only data: 1348k
[ 3.981471] clocksource: Switched to clocksource tsc
[ 4.075577] acpi-cpufreq: overriding BIOS provided _PSD data
[ 4.081299] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 4.092644] loop: module loaded
[ 4.153394] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 4.153450] xhci_hcd 0000:00:10.0: new USB bus registered, assigned
bus number 2
[ 4.153684] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci
version 0x100 quirks 0x00000410
[ 4.158205] hub 2-0:1.0: USB hub found
[ 4.158270] hub 2-0:1.0: 2 ports detected
[ 4.158720] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 4.158733] xhci_hcd 0000:00:10.0: new USB bus registered, assigned
bus number 3
[ 4.158798] usb usb3: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 4.161879] hub 3-0:1.0: USB hub found
[ 4.161909] hub 3-0:1.0: 2 ports detected
[ 4.206847] hub 1-1:1.0: USB hub found
[ 4.207026] hub 1-1:1.0: 4 ports detected
[ 4.272406] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 4.304451] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 4.464661] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 4.588698] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 4.589028] scsi host4: usb-storage 2-1:1.0
[ 4.718214] load apu3 GPIO driver module
[ 4.718494] PCI Revision ID: 0x42
[ 4.718757] apu3 GPIO driver module loaded
[ 5.589079] scsi 4:0:0:0: Direct-Access CBM Flash
Disk 5.00 PQ: 0 ANSI: 2
[ 5.590182] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 5.590325] sd 4:0:0:0: [sdb] 2062336 512-byte logical blocks:
(1.05 GB/1007 MiB)
[ 5.590593] sd 4:0:0:0: [sdb] Write Protect is off
[ 5.590606] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 5.590892] sd 4:0:0:0: [sdb] No Caching mode page found
[ 5.594949] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5.597315] sdb: sdb1
[ 5.599007] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 6.261475] FAT-fs (sdb1): Volume was not properly unmounted. Some
data may be corrupt. Please run fsck.
[ 16.906769] random: nonblocking pool is initialized
