On May 10 14:28:16, mlar...@azathoth.net wrote:
> On Wed, May 10, 2017 at 05:19:04PM +0200, Jan Stary wrote:
> > This is current/i386 on a Compaq nx6310 laptop (dmesg below).
>
> This machine is notoriously bad. Did this ever work for you?
I just got the machine, so this is a first install on it.
>
> > Mostly works, but I experience trouble with suspend/resume.
> >
> > apmd(8) is running with apmd_flags="-A", but closing the lid does nothing,
> > eventhough machdep.lidsuspend=1 and machdep.lidaction=1
> > Trying to suspend manually with Fn+F3 does nothing as well.
> > Trying to suspend with apm(8)'s options does this:
> >
> > apm -S says
> >
> > May 10 16:12:32 hp apmd: system entering standby
> > May 10 16:12:33 hp /bsd: uhub1 detached
> > May 10 16:12:33 hp /bsd: uhub2 detached
> > May 10 16:12:33 hp /bsd: uhub3 detached
> >
> > and, presumably, goes into standby. The power led is blinking.
> > It will not resume: pressing the power button makes the power led
> > light up again, but that's it. Even the display backlight
> > stays turned off. The machine is not accessible remotely
> > and needs to be forcefully restarted.
> > /etc/apm/standby does not get called.
> >
> > apm -z says
> >
> > May 10 16:31:26 hp apmd: system suspending
> > May 10 16:31:28 hp /bsd: uhub1 detached
> > May 10 16:31:28 hp /bsd: uhub2 detached
> > May 10 16:31:28 hp /bsd: uhub3 detached
> >
> > and, presumably, goes to suspend, but never resumes.
> > The symptoms are the same as with apm -S.
> > /etc/apm/suspend does not get called.
> >
> > apm -Z puts the system into hibernation, and it works.
> > After pressing the power button, the machine boots,
> > and unhibernates at the end of the boot sequence.
> > /etc/apm/{hibernate,resume} get called.
> >
> > How can I help debug this?
> >
> > http://stare.cz/dmesg/compaq-nx6310.20170509
> > http://stare.cz/dmesg/compaq-nx6310.acpidump.tar
> > http://stare.cz/dmesg/compaq-nx6310.pcidump
> >
> > Jan
> >
> >
> > OpenBSD 6.1-current (GENERIC) #0: Tue May 9 17:46:04 CEST 2017
> > h...@hp.stare.cz:/usr/src/sys/arch/i386/compile/GENERIC
> > cpu0: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz ("GenuineIntel" 686-class)
> > 1.73 GHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,NXE,SSE3,MWAIT,TM2,xTPR,PDCM,PERF,SENSOR
> > real mem = 1601519616 (1527MB)
> > avail mem = 1558122496 (1485MB)
> > mpath0 at root
> > scsibus0 at mpath0: 256 targets
> > mainbus0 at root
> > bios0 at mainbus0: date 04/17/07, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev. 2.4
> > @ 0xf38eb (23 entries)
> > bios0: vendor Hewlett-Packard version "68YDU Ver. F.0D" date 04/17/2007
> > bios0: Hewlett-Packard 30AA
> > acpi0 at bios0: rev 2
> > acpi0: sleep states S0 S3 S4 S5
> > acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT
> > acpi0: wakeup devices C096(S5) C0F1(S3) C0F8(S3) C0F9(S3) C0FA(S3) C0FB(S3)
> > C102(S5) C22B(S5) C115(S5) C22C(S5) C118(S5) C22C(S5)
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpihpet0 at acpi0: 14318179 Hz
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> > cpu0: apic clock running at 132MHz
> > cpu0: mwait min=64, max=64, C-substates=0.1.1.1, IBE
> > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> > acpiprt0 at acpi0: bus 2 (C096)
> > acpiprt1 at acpi0: bus 8 (C102)
> > acpiprt2 at acpi0: bus 24 (C115)
> > acpiprt3 at acpi0: bus 32 (C118)
> > acpiprt4 at acpi0: bus 0 (C002)
> > acpiec0 at acpi0
> > acpicpu0 at acpi0: !C3(250@17 io@0x1015), !C2(500@1 io@0x1014), C1(1000@1
> > halt)
> > acpipwrres0 at acpi0: C1F0, resource for C1EC
> > acpipwrres1 at acpi0: C1FD, resource for C1F1
> > acpipwrres2 at acpi0: C21A, resource for C218
> > acpipwrres3 at acpi0: C222, resource for C121
> > acpipwrres4 at acpi0: C321, resource for C325
> > acpipwrres5 at acpi0: C322, resource for C326
> > acpipwrres6 at acpi0: C323, resource for C327
> > acpipwrres7 at acpi0: C324, resource for C328
> > acpitz0 at acpi0: critical temperature is 256 degC
> > acpitz1 at acpi0: critical temperature is 105 degC
> > acpitz2 at acpi0: critical temperature is 105 degC
> > acpitz3 at acpi0: critical temperature is 105 degC
> > acpitz4 at acpi0: critical temperature is 110 degC
> > "PNP0A06" at acpi0 not configured
> > "PNP0303" at acpi0 not configured
> > "SYN0112" at acpi0 not configured
> > "HPQ0006" at acpi0 not configured
> > acpibat0 at acpi0: C1BC model "Primary" serial 08083 2016/11/05 type LIon
> > oem "Hewlett-Packard"
> > acpibat1 at acpi0: C1BB not present
> > acpiac0 at acpi0: AC unit online
> > acpibtn0 at acpi0: C23F
> > acpibtn1 at acpi0: C238
> > "PNP0C14" at acpi0 not configured
> > "PNP0C0B" at acpi0 not configured
> > "PNP0C0B" at acpi0 not configured
> > "PNP0C0B" at acpi0 not configured
> > "PNP0C0B" at acpi0 not configured
> > acpivideo0 at acpi0: C083
> > bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1800
> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
> > inteldrm0 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
> > drm0 at inteldrm0
> > intagp0 at inteldrm0
> > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> > inteldrm0: apic 1 int 16
> > inteldrm0: 1024x768, 32bpp
> > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> > wsdisplay0: screen 1-5 added (std, vt100 emulation)
> > "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
> > azalia0: codecs: Analog Devices AD1981HD, AT&T/Lucent/0x3026, using Analog
> > Devices AD1981HD
> > audio0 at azalia0
> > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 1 int 16
> > pci1 at ppb0 bus 8
> > bwi0 at pci1 dev 0 function 0 "Broadcom BCM4311" rev 0x01: apic 1 int 16,
> > address 00:14:a5:f0:fa:2c
> > ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: apic 1 int 18
> > pci2 at ppb1 bus 24
> > ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: apic 1 int 19
> > pci3 at ppb2 bus 32
> > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 1 int 20
> > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 1 int 21
> > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 1 int 18
> > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 1 int 19
> > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 1 int 20
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
> > 2.00/1.00 addr 1
> > ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
> > pci4 at ppb3 bus 2
> > cbb0 at pci4 dev 6 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1 int 18
> > "TI PCIXX12 FireWire" rev 0x00 at pci4 dev 6 function 1 not configured
> > bce0 at pci4 dev 14 function 0 "Broadcom BCM4401B1" rev 0x02: apic 1 int
> > 16, address 00:1a:4b:6f:6c:1f
> > bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
> > cardslot0 at cbb0 slot 0 flags 0
> > cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
> > pcmcia0 at cardslot0
> > ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM
> > disabled
> > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
> > channel 0 configured to compatibility, channel 1 configured to compatibility
> > atapiscsi0 at pciide0 channel 0 drive 0
> > scsibus1 at atapiscsi0: 2 targets
> > cd0 at scsibus1 targ 0 lun 0: <PIONEER, DVDRW DVR-K17, 1.05> ATAPI 5/cdrom
> > removable
> > cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> > pciide0: channel 1 ignored (disabled)
> > ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: msi, AHCI
> > 1.1
> > ahci0: port 0: 1.5Gb/s
> > scsibus2 at ahci0: 32 targets
> > sd0 at scsibus2 targ 0 lun 0: <ATA, Hitachi HTS54161, SBDO> SCSI3 0/direct
> > fixed naa.5000cca51eefd39b
> > sd0: 114473MB, 512 bytes/sector, 234441648 sectors
> > usb1 at uhci0: USB revision 1.0
> > uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev
> > 1.00/1.00 addr 1
> > usb2 at uhci1: USB revision 1.0
> > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
> > 1.00/1.00 addr 1
> > usb3 at uhci2: USB revision 1.0
> > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
> > 1.00/1.00 addr 1
> > usb4 at uhci3: USB revision 1.0
> > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
> > 1.00/1.00 addr 1
> > isa0 at ichpcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > pckbd0 at pckbc0 (kbd slot)
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pms0 at pckbc0 (aux slot)
> > wsmouse0 at pms0 mux 0
> > wsmouse1 at pms0 mux 0
> > pms0: Synaptics touchpad, firmware 6.2
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > urndis0 at uhub0 port 3 configuration 1 interface 0 "Android Android" rev
> > 2.00/3.10 addr 2
> > urndis0: using RNDIS, address 02:0d:02:5f:33:64
> > vscsi0 at root
> > scsibus3 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus4 at softraid0: 256 targets
> > root on sd0a (8607602cb9fc6ee0.a) swap on sd0b dump on sd0b
> > WARNING: / was not properly unmounted
> > uhub1 detached
> > uhub2 detached
> > uhub3 detached
> > uhub4 detached
> > urndis0 detached
> > uhub0 detached
> > uhub0 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev
> > 1.00/1.00 addr 1
> > uhub1 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
> > 1.00/1.00 addr 1
> > uhub2 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
> > 1.00/1.00 addr 1
> > uhub3 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
> > 1.00/1.00 addr 1
> > uhub4 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
> > 2.00/1.00 addr 1
> > urndis0 at uhub4 port 3 configuration 1 interface 0 "Android Android" rev
> > 2.00/3.10 addr 2
> > urndis0: using RNDIS, address 02:0d:02:5f:33:64
> > uhub0 detached
> > uhub1 detached
> > uhub2 detached
> > uhub3 detached
> > urndis0 detached
> > uhub4 detached
> > uhub0 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev
> > 1.00/1.00 addr 1
> > uhub1 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
> > 1.00/1.00 addr 1
> > uhub2 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
> > 1.00/1.00 addr 1
> > uhub3 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
> > 1.00/1.00 addr 1
> > uhub4 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
> > 2.00/1.00 addr 1
> > urndis0 at uhub4 port 3 configuration 1 interface 0 "Android Android" rev
> > 2.00/3.10 addr 2
> > urndis0: using RNDIS, address 02:0d:02:5f:33:64
> >
>
