On May 14 13:10:17, s...@stsp.name wrote:
> On Sun, May 14, 2017 at 12:16:55PM +0200, Jan Stary wrote:
> > This is current/amdd64 on a Dell Latitude E5570 (dmesg below).
> > The "device timeouts" of iwm have mostly disappeared,
>
> Great!
>
> > but the boot sequence ends with
> >
> > iwm0: hw rev 0x200, fw ver 16.242414.0, address e4:a4:71:40:21:08
> > iwm0: could not initiate scan
> >
> > This particular message is not in iwm(4) DIAGNOSTICS.
> > Is it anything to worry about?
>
> This is nothing to worry about if it works eventually.
>
> But please show me your hostname.iwm0 file.
dhcp
> It's possible that you're running a specific sequence of commands which
> triggers this. If I knew what those are I could try to reproduce it.
I move between different SSIDs and never got around to automatize it
(btw, what do people use for that?), so I do it manually, like this:
$ doas ifconfig iwm0 up nwid stare.cz wpakey XXXPASSWORDXXX -nwkey
$ doas sh /etc/netstart iwm0
> > Running against a current/i364 AP
> > seems to work fine with 11g (less so with 11n).
>
> It's an athn(4) AP?
Yes. It's an ALIX (dmesg below) with
athn0 at pci0 dev 12 function 0 "Atheros AR5416" rev 0x01: irq 9
athn0: MAC AR5416 rev 2, RF AR2133 (3T2R), ROM rev 2, address 00:1d:6a:6b:03:07
configured as
inet 192.168.33.1 255.255.255.0 NONE
media autoselect mediaopt hostap mode 11g chan 11
nwid stare.cz wpakey XXX
I was having problems using 11n (with various clients) and
was advised here to use 11g for now, which indeed seems more reliable.
Jan
OpenBSD 6.1-current (GENERIC) #304: Sun Apr 9 20:21:01 MDT 2017
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 432
MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW
real mem = 133713920 (127MB)
avail mem = 118476800 (112MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 12/10/07, BIOS32 rev. 0 @ 0xfceb2
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xe0000/0xa800
cpu0 at mainbus0: (uniprocessor)
mtrr: K6-family MTRR support (2 registers)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
vr0 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10, address
00:0d:b9:12:9f:2c
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063,
model 0x0034
vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address
00:0d:b9:12:9f:2d
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063,
model 0x0034
vr2 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12, address
00:0d:b9:12:9f:2e
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063,
model 0x0034
athn0 at pci0 dev 12 function 0 "Atheros AR5416" rev 0x01: irq 9
athn0: MAC AR5416 rev 2, RF AR2133 (3T2R), ROM rev 2, address 00:1d:6a:6b:03:07
glxpcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 32-bit
3579545Hz timer, watchdog, gpio, i2c
gpio0 at glxpcib0: 32 pins
iic0 at glxpcib0
pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ELITE PRO CF CARD 8GB>
wd0: 1-sector PIO, LBA, 7279MB, 14909328 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 15, version 1.0,
legacy support
ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 15
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00
addr 1
isa0 at glxpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00
addr 1
nvram: invalid checksum
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (bf940e6c7aaf2c50.a) swap on wd0b dump on wd0b
clock: unknown CMOS layout
