On May 18 11:15:16, h...@stare.cz wrote:
> On May 17 15:33:04, j...@openbsd.org wrote:
> > On Wed, 17 May 2017 at 21:59:31 +0200, Jan Stary wrote:
> > > This is current current/i386 on a 2006 MacBook1,1 (model A1181).
> > > dmesg and sysctl hw below.
> > > The battery is not detected.
> > Can you add an acpisbs line to your kernel config and see if it works?
> > acpisbs* at acpi?
>
> On May 17 17:26:52, t...@tedunangst.com wrote:
> > > "ACPI0002" at acpi0 not configured
> > The acpisbs driver isn't included in the i386 kernel. You can try adding it.
>
> Thanks, that's what I've been missing; dmesg and sysctl hw below.
>
> Battery state: high, 60% remaining, 40 minutes life estimate
> A/C adapter state: not connected
> Performance adjustment mode: auto (1000 MHz)
It's enabled now by default; with the latest snapshot, dmesg says
acpisbs0: acpi_smbus_read: error reading status: 0x16
and systcl hw.sensors reports zero current,
with AC plugged in or not:
hw.sensors.acpisbs0.current0=0.00 A (current being supplied), OK
hw.sensors.acpisbs0.current1=0.00 A (average current supplied), OK
hw.sensors.acpisbs0.current2=0.00 A (desired charging rate), OK
How can I help debug this?
Jan
OpenBSD 6.1-current (GENERIC.MP) #0: Sun May 21 19:56:28 CEST 2017
h...@mb.stare.cz:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Genuine Intel(R) CPU T2500 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF,SENSOR
real mem = 2114273280 (2016MB)
avail mem = 2060967936 (1965MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 07/29/05, SMBIOS rev. 2.4 @ 0xe7490 (36 entries)
bios0: vendor Apple Computer, Inc. version "MB11.88Z.0061.B03.0610121324" date
10/12/06
bios0: Apple Computer, Inc. MacBook1,1
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG ASF! SBST ECDT SSDT SSDT SSDT
acpi0: wakeup devices ADP1(S3) LID0(S3) PXS1(S4) PXS2(S4) USB1(S3) USB2(S3)
USB3(S3) USB4(S3) USB7(S3) EC__(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 166MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Genuine Intel(R) CPU T2500 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF,SENSOR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (PCIB)
acpicpu0 at acpi0: !C4(100@55 mwait@0x31), !C3(500@1 mwait@0x20), !C2(500@1
mwait@0x10), C1(1000@1 mwait), PSS
acpicpu1 at acpi0: !C4(100@55 mwait@0x31), !C3(500@1 mwait@0x20), !C2(500@1
mwait@0x10), C1(1000@1 mwait), PSS
acpisbs0 at acpi0: SBS0 model "ASMB016" serial 35580 type LION oem "DP"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
"APP0002" at acpi0 not configured
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
"APP0001" at acpi0 not configured
"APP0003" at acpi0 not configured
"ACPI0001" at acpi0 not configured
"IFX0101" at acpi0 not configured
acpivideo0 at acpi0: GFX0
bios0: ROM list: 0xc0000/0xe600!
cpu0: Enhanced SpeedStep 1998 MHz: speeds: 2000, 1833, 1667, 1500, 1333, 1000
MHz
memory map conflict 0xe00f8000/0x1000
memory map conflict 0xfed1c000/0x4000
memory map conflict 0xfffb0000/0x30000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0x80000000, size 0x10000000
inteldrm0: apic 1 int 16
inteldrm0: 1280x800, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
vendor "Intel", unknown product 0x27a3 (class DASP subclass Time and Frequency,
rev 0x03) at pci0 dev 7 function 0 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Sigmatel STAC9220/1
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 17
pci1 at ppb0 bus 1
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x22, Yukon-2 EC
rev. A3 (0x2): msi
msk0 at mskc0 port A: address 00:16:cb:d0:c4:3c
eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 16
pci2 at ppb1 bus 2
ath0 at pci2 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 1 int 17
ath0: AR5424 10.3 phy 6.1 rf 10.2 eeprom 5.3, WORAW, address 00:16:cb:bf:f6:88
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 21
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 3
"AT&T/Lucent FW322 1394" rev 0x61 at pci3 dev 3 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-R UJ-857, HBEA> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 1 int 19 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 1: <ST960813AS>
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at ichpcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
asmc0 at isa0 port 0x300/32: rev 1.4f504, 203 keys
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vmm0 at mainbus0: VMX
drm: render error detected, EIR: 0x00000010
drm: page table error
drm: PGTBL_ER: 0x00000102
error: [drm:pid0:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010,
masking
drm: render error detected, EIR: 0x00000010
drm: page table error
drm: PGTBL_ER: 0x00000102
ugen0 at uhub0 port 4 "Micron Built-in iSight" rev 2.00/1.89 addr 2
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Apple Computer Apple
Internal Keyboard / Trackpad" rev 2.00/0.64 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 5 key codes, country code 13
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1 "Apple Computer Apple
Internal Keyboard / Trackpad" rev 2.00/0.64 addr 2
uhidev1: iclass 3/1, 5 report ids
ums0 at uhidev1 reportid 2: 3 buttons
wsmouse0 at ums0 mux 0
ums1 at uhidev1 reportid 5
ums1: mouse has no X report
uhidev2 at uhub1 port 2 configuration 1 interface 2 "Apple Computer Apple
Internal Keyboard / Trackpad" rev 2.00/0.64 addr 2
uhidev2: iclass 3/0
uhid0 at uhidev2: input=1, output=0, feature=0
uhidev3 at uhub3 port 2 configuration 1 interface 0 "Apple Computer, Inc. IR
Receiver" rev 2.00/1.10 addr 2
uhidev3: iclass 3/0, 38 report ids
uhid1 at uhidev3 reportid 36: input=4, output=0, feature=0
uhid2 at uhidev3 reportid 37: input=4, output=0, feature=0
uhid3 at uhidev3 reportid 38: input=4, output=0, feature=0
uhidev4 at uhub4 port 1 configuration 1 interface 0 "Apple Computer HID-proxy"
rev 2.00/19.65 addr 2
uhidev4: iclass 3/1
ukbd1 at uhidev4: 8 variable keys, 6 key codes
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhidev5 at uhub4 port 1 configuration 1 interface 1 "Apple Computer HID-proxy"
rev 2.00/19.65 addr 2
uhidev5: iclass 3/1
ums2 at uhidev5: 5 buttons
wsmouse1 at ums2 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd0 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd0: 24478MB, 512 bytes/sector, 50131568 sectors
root on sd0a (48e8361c0b9499d0.a) swap on sd0b dump on sd0b
acpisbs0: acpi_smbus_read: error reading status: 0x16
hw.machine=i386
hw.model=Genuine Intel(R) CPU T2500 @ 2.00GHz ("GenuineIntel" 686-class)
hw.ncpu=2
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=cd0:,wd0:e2cd2b66ff5238d6,sd0:48e8361c0b9499d0
hw.diskcount=3
hw.sensors.acpisbs0.temp0=30.53 degC (internal temperature), OK
hw.sensors.acpisbs0.volt0=12.56 VDC (voltage), OK
hw.sensors.acpisbs0.volt1=12.60 VDC (desired charging voltage), OK
hw.sensors.acpisbs0.volt2=10.95 VDC (voltage of new battery), OK
hw.sensors.acpisbs0.current0=0.00 A (current being supplied), OK
hw.sensors.acpisbs0.current1=0.00 A (average current supplied), OK
hw.sensors.acpisbs0.current2=0.00 A (desired charging rate), OK
hw.sensors.acpisbs0.amphour0=29.67 Ah (remaining capacity), OK
hw.sensors.acpisbs0.amphour1=29.67 Ah (capacity when fully charged), OK
hw.sensors.acpisbs0.amphour2=50.20 Ah (capacity of new battery), OK
hw.sensors.acpisbs0.raw0=unknown (remaining run time minutes), UNKNOWN
hw.sensors.acpisbs0.raw1=unknown (avg remaining minutes), UNKNOWN
hw.sensors.acpisbs0.raw2=unknown (avg minutes until full charge), UNKNOWN
hw.sensors.acpisbs0.raw3=454 (charge and discharge cycles), OK
hw.sensors.acpisbs0.percent0=100.00% (remaining capacity), OK
hw.sensors.acpisbs0.percent1=60.00% (remaining of design capacity), OK
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.acpibtn0.indicator0=On (lid open)
hw.sensors.cpu0.temp0=56.00 degC
hw.sensors.asmc0.temp0=32.00 degC (TB0T enclosure bottom)
hw.sensors.asmc0.temp1=64.00 degC (TC0D cpu0 die core)
hw.sensors.asmc0.temp2=58.00 degC (TC0P cpu0 proximity)
hw.sensors.asmc0.temp3=49.00 degC (TM0P mem bank a1)
hw.sensors.asmc0.temp4=54.00 degC (TN0P northbridge proximity)
hw.sensors.asmc0.temp5=54.00 degC (TN1P northbridge 2)
hw.sensors.asmc0.temp6=58.00 degC (TTF0)
hw.sensors.asmc0.temp7=56.00 degC (Th0H main heatsink a)
hw.sensors.asmc0.temp8=58.00 degC (Th0S)
hw.sensors.asmc0.temp9=75.00 degC (Th1H main heatsink b)
hw.sensors.asmc0.temp10=41.00 degC (Ts0P)
hw.sensors.asmc0.fan0=2287 RPM (Exhaust, center lower rear)
hw.sensors.softraid0.drive0=online (sd0), OK
hw.cpuspeed=1000
hw.setperf=0
hw.vendor=Apple Computer, Inc.
hw.product=MacBook1,1
hw.version=1.0
hw.serialno=4H6261TZU9E
hw.uuid=9cfe245e-d0c8-bd45-a79f-54ea5fbd3d97
hw.physmem=2114273280
hw.usermem=2109968384
hw.ncpufound=2
hw.allowpowerdown=1
hw.perfpolicy=auto
