You are welcome, Mr G Just one more thing: you should share your dmesg in order to know all the hw involved in this drama :)
Manuel > El 22/07/2017, a las 17:30, G <gp...@mailbox.org> escribió: > > Yes. Didn't work. fw_update updates vmm uvideo and iwm. > > Anyway thanks for your replies! > >> On 07/23/17 01:22, Manuel Solis wrote: >> To bad, that is beyond my knowledge :s >> >> Have you tried >> #fw_update >> ??????? >> >> Manuel >> >>> El 22/07/2017, a las 17:13, G <gp...@mailbox.org> escribió: >>> >>> Thanks for your replies. >>> >>> I get >>> >>> # xrandr --query >>> xrandr: Failed to get size of gamma for output default >>> Screen 0: minimum 1920 x 1080, current 1920 x 1080, maximum 1920 x 1080 >>> default connected 1920x1080+0+0 0mm x 0mm >>> 1920x1080 0.00* >>> >>> I don't know if its a problem with skylake since openbsd 6.1 stable >>> doesn't support it yet. >>> >>> >>> >>>> On 07/23/17 00:53, Manuel Solis wrote: >>>> Hello again, >>>> >>>> Then you should use xrandr >>>> >>>> $xrandr --query >>>> To know which devices you have >>>> >>>> $xrandr --output LVDS1 --auto >>>> To enable the monitor (LVDS1/VGA1/HDMI1) >>>> >>>> $xrandr --output LVDS1 --set BACKLIGHT 50 >>>> to adjust the backlight >>>> >>>> try for instance 50, 99, 05 and see how it goes >>>> >>>> >>>> Manuel >>>> >>>>> El 22/07/2017, a las 16:20, G <gp...@mailbox.org> escribió: >>>>> >>>>> Thanks for the reply but it doesn't work. >>>>> >>>>>> On 07/23/17 00:11, Manuel Solis wrote: >>>>>> Hello, Mr G >>>>>> >>>>>> Try this two: >>>>>> $xbacklight -set 99 >>>>>> >>>>>> $xbacklight -set 50 >>>>>> >>>>>> If you see something different then it works!! >>>>>> >>>>>> Manuel >>>>>> >>>>>>> El 22/07/2017, a las 14:48, G <gp...@mailbox.org> escribió: >>>>>>> >>>>>>> Hello. >>>>>>> I'm trying to adjust my laptop brightness. >>>>>>> When I'm trying to use xbacklight i get >>>>>>> >>>>>>> #xbacklight >>>>>>> >>>>>>> No outputs have backlight property >>>>>>> >>>>>>> I search around and it seems that xbacklight is broken. I found this >>>>>>> email >>>>>>> https://marc.info/?l=openbsd-bugs&m=149919062727474 >>>>>>> >>>>>>> that suggested to use wsconsctl but it doesn't seems to work. Although >>>>>>> the value of wsconsctl display.brightness changes the screen brightness >>>>>>> doesn't change. >>>>>>> >>>>>>> # wsconsctl >>>>>>> keyboard.type=pc-xt >>>>>>> keyboard.bell.pitch=400 >>>>>>> keyboard.bell.period=100 >>>>>>> keyboard.bell.volume=50 >>>>>>> keyboard.bell.pitch.default=400 >>>>>>> keyboard.bell.period.default=100 >>>>>>> keyboard.bell.volume.default=50 >>>>>>> wsconsctl: Use explicit arg to view keyboard.map. >>>>>>> keyboard.repeat.del1=400 >>>>>>> keyboard.repeat.deln=100 >>>>>>> keyboard.repeat.del1.default=400 >>>>>>> keyboard.repeat.deln.default=100 >>>>>>> keyboard.ledstate=2 >>>>>>> keyboard.encoding=us >>>>>>> mouse.type=synaptics >>>>>>> mouse.rawmode=0 >>>>>>> mouse.scale=1472,5670,1408,4794,0,44,76 >>>>>>> mouse1.type=usb >>>>>>> mouse1.rawmode=1 >>>>>>> mouse1.scale=0,0,0,0,0,0,0 >>>>>>> display.type=vga-pci >>>>>>> display.emulations=vt100 >>>>>>> display.screentypes=80x25,80x25bf,80x40,80x40bf,80x50,80x50bf >>>>>>> display.focus=4 >>>>>>> display.brightness=100.00% >>>>>>> display.screen_on=250 >>>>>>> display.screen_off=0 >>>>>>> display.vblank=off >>>>>>> display.kbdact=on >>>>>>> display.msact=on >>>>>>> display.outact=on >>>>>>> # wsconsctl display.brightness=20 >>>>>>> display.brightness -> 20.00% >>>>>>> # wsconsctl >>>>>>> keyboard.type=pc-xt >>>>>>> keyboard.bell.pitch=400 >>>>>>> keyboard.bell.period=100 >>>>>>> keyboard.bell.volume=50 >>>>>>> keyboard.bell.pitch.default=400 >>>>>>> keyboard.bell.period.default=100 >>>>>>> keyboard.bell.volume.default=50 >>>>>>> wsconsctl: Use explicit arg to view keyboard.map. >>>>>>> keyboard.repeat.del1=400 >>>>>>> keyboard.repeat.deln=100 >>>>>>> keyboard.repeat.del1.default=400 >>>>>>> keyboard.repeat.deln.default=100 >>>>>>> keyboard.ledstate=2 >>>>>>> keyboard.encoding=us >>>>>>> mouse.type=synaptics >>>>>>> mouse.rawmode=0 >>>>>>> mouse.scale=1472,5670,1408,4794,0,44,76 >>>>>>> mouse1.type=usb >>>>>>> mouse1.rawmode=1 >>>>>>> mouse1.scale=0,0,0,0,0,0,0 >>>>>>> display.type=vga-pci >>>>>>> display.emulations=vt100 >>>>>>> display.screentypes=80x25,80x25bf,80x40,80x40bf,80x50,80x50bf >>>>>>> display.focus=4 >>>>>>> display.brightness=20.00% >>>>>>> display.screen_on=250 >>>>>>> display.screen_off=0 >>>>>>> display.vblank=off >>>>>>> display.kbdact=on >>>>>>> display.msact=on >>>>>>> display.outact=on >>>>>>> >>>>> >>> >
