What happens if you try jcs' intel_backlight utility? https://devhub.io/repos/jcs-intel_backlight_fbsd
Take note of the machdep.allowaperture=3 change you need to make to sysctl.conf (requires a reboot). On Sat, Jul 22, 2017 at 5:09 PM, Michel Behr <michelb...@gmail.com> wrote: > Hi - I'm trying to connect my Lenovo Laptop a monitor via HDMI but I'm > getting no output (below I'm including messages regarding xrandr, dmesg, > and Xorg.0.log). > > Any pointing to the right direction would be much appreciated. > > Kind regards, > > Michel. > > > > $ uname -a > > > OpenBSD S400 6.1 GENERIC.MP#115 amd64 > $ dmesg > > > OpenBSD 6.1-current (GENERIC.MP) #96: Thu Jul 13 19:31:55 MDT 2017 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > RTC BIOS diagnostic error 80<clock_battery> > real mem = 4140773376 (3948MB) > avail mem = 4009488384 (3823MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6fd0 (61 entries) > bios0: vendor LENOVO version "6DCN92WW(V8.06)" date 02/21/2013 > bios0: LENOVO VIUS3 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SLIC UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP > FPDT MSDM SSDT SSDT DMAR > acpi0: wakeup devices P0P1(S0) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S0) PXSX(S3) > PXSX(S3) PXSX(S3) PXSX(S3) PXSX(S3) RP05(S0) PXSX(S3) RP06(S0) PXSX(S3) > RP07(S0) PXSX(S3) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.40 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16, > xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES, > XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: TSC frequency 1696402120 Hz > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.14 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16, > xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES, > XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 1, core 0, package 0 > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.14 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16, > xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES, > XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 1, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.14 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16, > xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES, > XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 1, core 1, package 0 > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (P0P1) > acpiprt2 at acpi0: bus 1 (RP01) > acpiprt3 at acpi0: bus -1 (RP02) > acpiprt4 at acpi0: bus -1 (RP03) > acpiprt5 at acpi0: bus -1 (RP04) > acpiprt6 at acpi0: bus -1 (RP05) > acpiprt7 at acpi0: bus -1 (RP06) > acpiprt8 at acpi0: bus -1 (RP07) > acpiprt9 at acpi0: bus -1 (RP08) > acpiprt10 at acpi0: bus -1 (PEG0) > acpiprt11 at acpi0: bus -1 (PEG1) > acpiprt12 at acpi0: bus -1 (PEG2) > acpiprt13 at acpi0: bus -1 (PEG3) > acpiec0 at acpi0 > acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpitz0 at acpi0: critical temperature is 127 degC > "INT3F0D" at acpi0 not configured > acpibtn0 at acpi0: PWRB > "IDEA0100" at acpi0 not configured > "SYN2B04" at acpi0 not configured > "VPC2004" at acpi0 not configured > "AOA2011" at acpi0 not configured > acpibat0 at acpi0: BAT1 model "PABAS0241231" serial 41167 type Li-Ion oem > "LENOVO " > acpiac0 at acpi0: AC unit online > acpibtn1 at acpi0: LID0 > "INT340E" at acpi0 not configured > acpivideo0 at acpi0: VGA_ > acpivideo1 at acpi0: VGA_ > acpivideo2 at acpi0: GFX0 > acpivout0 at acpivideo2: DD02 > cpu0: Enhanced SpeedStep 1696 MHz: speeds: 1701, 1700, 1600, 1500, 1400, > 1300, 1200, 1100, 1000, 900, 800, 782 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 > drm0 at inteldrm0 > inteldrm0: msi > inteldrm0: 1366x768, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int > 16 > ehci0: timed out waiting for BIOS > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi > azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi > pci1 at ppb0 bus 1 > re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E (0x4080), > msi, address 20:89:84:45:d7:96 > rlphy0 at re0 phy 7: RTL8201E 10/100 PHY, rev. 2 > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int > 23 > ehci1: timed out waiting for BIOS > usb2 at ehci1: USB revision 2.0 > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 "Intel HM77 LPC" rev 0x04 > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI > 1.3 > ahci0: port 1: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 1 lun 0: <ATA, WDC WD5000LPVT-0, 02.0> SCSI3 0/direct > fixed naa.50014ee6adcc4026 > sd0: 476940MB, 512 bytes/sector, 976773168 sectors > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 0 > int 19 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > pms0: Synaptics clickpad, firmware 8.1 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch > fifo underrun on pch transcoder A > error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH > transcoder A FIFO underrun > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse1 at ums0 mux 0 > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.00 addr 2 > urtw0 at uhub3 port 2 configuration 1 interface 0 "Realtek RTL8187B" rev > 2.00/2.00 addr 3 > urtw0: RTL8187B rev E, address 00:08:54:8d:f3:b1 > ugen0 at uhub3 port 3 "Generic USB2.0-CRW" rev 2.00/39.60 addr 4 > uvideo0 at uhub3 port 4 configuration 1 interface 0 "Vimicro Corp. Lenovo > EasyCamera" rev 2.00/12.06 addr 5 > video0 at uvideo0 > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.00 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (70c53ab2024e9707.a) swap on sd0b dump on sd0b > uid 0 on /usr: file system full > wsmouse1 detached > ums0 detached > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse1 at ums0 mux 0 > wsmouse1 detached > ums0 detached > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse1 at ums0 mux 0 > wsmouse1 detached > ums0 detached > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse1 at ums0 mux 0 > syncing disks... done > rebooting... > OpenBSD 6.1-current (GENERIC.MP) #96: Thu Jul 13 19:31:55 MDT 2017 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > RTC BIOS diagnostic error 80<clock_battery> > real mem = 4140773376 (3948MB) > avail mem = 4009488384 (3823MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6fd0 (61 entries) > bios0: vendor LENOVO version "6DCN92WW(V8.06)" date 02/21/2013 > bios0: LENOVO VIUS3 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SLIC UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP > FPDT MSDM SSDT SSDT DMAR > acpi0: wakeup devices P0P1(S0) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S0) PXSX(S3) > PXSX(S3) PXSX(S3) PXSX(S3) PXSX(S3) RP05(S0) PXSX(S3) RP06(S0) PXSX(S3) > RP07(S0) PXSX(S3) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.40 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16, > xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES, > XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: TSC frequency 1696398130 Hz > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.15 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16, > xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES, > XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 1, core 0, package 0 > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.15 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16, > xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES, > XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 1, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.15 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16, > xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES, > XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 1, core 1, package 0 > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (P0P1) > acpiprt2 at acpi0: bus 1 (RP01) > acpiprt3 at acpi0: bus -1 (RP02) > acpiprt4 at acpi0: bus -1 (RP03) > acpiprt5 at acpi0: bus -1 (RP04) > acpiprt6 at acpi0: bus -1 (RP05) > acpiprt7 at acpi0: bus -1 (RP06) > acpiprt8 at acpi0: bus -1 (RP07) > acpiprt9 at acpi0: bus -1 (RP08) > acpiprt10 at acpi0: bus -1 (PEG0) > acpiprt11 at acpi0: bus -1 (PEG1) > acpiprt12 at acpi0: bus -1 (PEG2) > acpiprt13 at acpi0: bus -1 (PEG3) > acpiec0 at acpi0 > acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpitz0 at acpi0: critical temperature is 127 degC > "INT3F0D" at acpi0 not configured > acpibtn0 at acpi0: PWRB > "IDEA0100" at acpi0 not configured > "SYN2B04" at acpi0 not configured > "VPC2004" at acpi0 not configured > "AOA2011" at acpi0 not configured > acpibat0 at acpi0: BAT1 model "PABAS0241231" serial 41167 type Li-Ion oem > "LENOVO " > acpiac0 at acpi0: AC unit online > acpibtn1 at acpi0: LID0 > "INT340E" at acpi0 not configured > acpivideo0 at acpi0: VGA_ > acpivideo1 at acpi0: VGA_ > acpivideo2 at acpi0: GFX0 > acpivout0 at acpivideo2: DD02 > cpu0: Enhanced SpeedStep 1696 MHz: speeds: 1701, 1700, 1600, 1500, 1400, > 1300, 1200, 1100, 1000, 900, 800, 782 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 > drm0 at inteldrm0 > inteldrm0: msi > inteldrm0: 1366x768, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int > 16 > ehci0: timed out waiting for BIOS > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi > azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi > pci1 at ppb0 bus 1 > re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E (0x4080), > msi, address 20:89:84:45:d7:96 > rlphy0 at re0 phy 7: RTL8201E 10/100 PHY, rev. 2 > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int > 23 > ehci1: timed out waiting for BIOS > usb2 at ehci1: USB revision 2.0 > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 "Intel HM77 LPC" rev 0x04 > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI > 1.3 > ahci0: port 1: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 1 lun 0: <ATA, WDC WD5000LPVT-0, 02.0> SCSI3 0/direct > fixed naa.50014ee6adcc4026 > sd0: 476940MB, 512 bytes/sector, 976773168 sectors > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 0 > int 19 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > pms0: Synaptics clickpad, firmware 8.1 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch > fifo underrun on pch transcoder A > error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH > transcoder A FIFO underrun > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse1 at ums0 mux 0 > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.00 addr 2 > urtw0 at uhub3 port 2 configuration 1 interface 0 "Realtek RTL8187B" rev > 2.00/2.00 addr 3 > urtw0: RTL8187B rev E, address 00:08:54:8d:f3:b1 > ugen0 at uhub3 port 3 "Generic USB2.0-CRW" rev 2.00/39.60 addr 4 > uvideo0 at uhub3 port 4 configuration 1 interface 0 "Vimicro Corp. Lenovo > EasyCamera" rev 2.00/12.06 addr 5 > video0 at uvideo0 > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.00 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (70c53ab2024e9707.a) swap on sd0b dump on sd0b > wsmouse1 detached > ums0 detached > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse1 at ums0 mux 0 > wsmouse1 detached > ums0 detached > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse1 at ums0 mux 0 > wsmouse1 detached > ums0 detached > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse1 at ums0 mux 0 > wsmouse1 detached > ums0 detached > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse1 at ums0 mux 0 > wsmouse1 detached > ums0 detached > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse1 at ums0 mux 0 > wsmouse1 detached > ums0 detached > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse1 at ums0 mux 0 > wsmouse1 detached > ums0 detached > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse1 at ums0 mux 0 > syncing disks... done > rebooti > OpenBSD 6.1-current (GENERIC.MP) #96: Thu Jul 13 19:31:55 MDT 2017 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > RTC BIOS diagnostic error 80<clock_battery> > real mem = 4140773376 (3948MB) > avail mem = 4009488384 (3823MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6fd0 (61 entries) > bios0: vendor LENOVO version "6DCN92WW(V8.06)" date 02/21/2013 > bios0: LENOVO VIUS3 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SLIC UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP > FPDT MSDM SSDT SSDT DMAR > acpi0: wakeup devices P0P1(S0) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S0) PXSX(S3) > PXSX(S3) PXSX(S3) PXSX(S3) PXSX(S3) RP05(S0) PXSX(S3) RP06(S0) PXSX(S3) > RP07(S0) PXSX(S3) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.41 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16, > xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES, > XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: TSC frequency 1696408410 Hz > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.15 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16, > xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES, > XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 1, core 0, package 0 > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.15 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16, > xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES, > XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 1, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.15 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16, > xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES, > XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 1, core 1, package 0 > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (P0P1) > acpiprt2 at acpi0: bus 1 (RP01) > acpiprt3 at acpi0: bus -1 (RP02) > acpiprt4 at acpi0: bus -1 (RP03) > acpiprt5 at acpi0: bus -1 (RP04) > acpiprt6 at acpi0: bus -1 (RP05) > acpiprt7 at acpi0: bus -1 (RP06) > acpiprt8 at acpi0: bus -1 (RP07) > acpiprt9 at acpi0: bus -1 (RP08) > acpiprt10 at acpi0: bus -1 (PEG0) > acpiprt11 at acpi0: bus -1 (PEG1) > acpiprt12 at acpi0: bus -1 (PEG2) > acpiprt13 at acpi0: bus -1 (PEG3) > acpiec0 at acpi0 > acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpitz0 at acpi0: critical temperature is 127 degC > "INT3F0D" at acpi0 not configured > acpibtn0 at acpi0: PWRB > "IDEA0100" at acpi0 not configured > "SYN2B04" at acpi0 not configured > "VPC2004" at acpi0 not configured > "AOA2011" at acpi0 not configured > acpibat0 at acpi0: BAT1 model "PABAS0241231" serial 41167 type Li-Ion oem > "LENOVO " > acpiac0 at acpi0: AC unit online > acpibtn1 at acpi0: LID0 > "INT340E" at acpi0 not configured > acpivideo0 at acpi0: VGA_ > acpivideo1 at acpi0: VGA_ > acpivideo2 at acpi0: GFX0 > acpivout0 at acpivideo2: DD02 > cpu0: Enhanced SpeedStep 1696 MHz: speeds: 1701, 1700, 1600, 1500, 1400, > 1300, 1200, 1100, 1000, 900, 800, 782 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 > drm0 at inteldrm0 > inteldrm0: msi > inteldrm0: 1366x768, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int > 16 > ehci0: timed out waiting for BIOS > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi > azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi > pci1 at ppb0 bus 1 > re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E (0x4080), > msi, address 20:89:84:45:d7:96 > rlphy0 at re0 phy 7: RTL8201E 10/100 PHY, rev. 2 > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int > 23 > ehci1: timed out waiting for BIOS > usb2 at ehci1: USB revision 2.0 > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 "Intel HM77 LPC" rev 0x04 > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI > 1.3 > ahci0: port 1: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 1 lun 0: <ATA, WDC WD5000LPVT-0, 02.0> SCSI3 0/direct > fixed naa.50014ee6adcc4026 > sd0: 476940MB, 512 bytes/sector, 976773168 sectors > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 0 > int 19 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > pms0: Synaptics clickpad, firmware 8.1 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch > fifo underrun on pch transcoder A > error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH > transcoder A FIFO underrun > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse1 at ums0 mux 0 > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.00 addr 2 > urtw0 at uhub3 port 2 configuration 1 interface 0 "Realtek RTL8187B" rev > 2.00/2.00 addr 3 > urtw0: RTL8187B rev E, address 00:08:54:8d:f3:b1 > ugen0 at uhub3 port 3 "Generic USB2.0-CRW" rev 2.00/39.60 addr 4 > uvideo0 at uhub3 port 4 configuration 1 interface 0 "Vimicro Corp. Lenovo > EasyCamera" rev 2.00/12.06 addr 5 > video0 at uvideo0 > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.00 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (70c53ab2024e9707.a) swap on sd0b dump on sd0b > uid 0 on /usr: file system full > syncing disks... done > rebooting... > OpenBSD 6.1-current (RAMDISK_CD) #106: Sat Jul 22 10:02:15 MDT 2017 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD > RTC BIOS diagnostic error 80<clock_battery> > real mem = 4140773376 (3948MB) > avail mem = 4011528192 (3825MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6fd0 (61 entries) > bios0: vendor LENOVO version "6DCN92WW(V8.06)" date 02/21/2013 > bios0: LENOVO VIUS3 > acpi0 at bios0: rev 2 > acpi0: tables DSDT FACP SLIC UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP > FPDT MSDM SSDT SSDT DMAR > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.44 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16, > xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES, > XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: TSC frequency 1696435740 Hz > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > cpu at mainbus0: not configured > cpu at mainbus0: not configured > cpu at mainbus0: not configured > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (P0P1) > acpiprt2 at acpi0: bus 1 (RP01) > acpiprt3 at acpi0: bus -1 (RP02) > acpiprt4 at acpi0: bus -1 (RP03) > acpiprt5 at acpi0: bus -1 (RP04) > acpiprt6 at acpi0: bus -1 (RP05) > acpiprt7 at acpi0: bus -1 (RP06) > acpiprt8 at acpi0: bus -1 (RP07) > acpiprt9 at acpi0: bus -1 (RP08) > acpiprt10 at acpi0: bus -1 (PEG0) > acpiprt11 at acpi0: bus -1 (PEG1) > acpiprt12 at acpi0: bus -1 (PEG2) > acpiprt13 at acpi0: bus -1 (PEG3) > acpiec0 at acpi0 > acpicpu at acpi0 not configured > acpitz at acpi0 not configured > "INT3F0D" at acpi0 not configured > "PNP0C0C" at acpi0 not configured > "IDEA0100" at acpi0 not configured > "SYN2B04" at acpi0 not configured > "VPC2004" at acpi0 not configured > "AOA2011" at acpi0 not configured > "PNP0C0A" at acpi0 not configured > "ACPI0003" at acpi0 not configured > "PNP0C0D" at acpi0 not configured > "INT340E" at acpi0 not configured > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 > vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 > wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation) > xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int > 16 > ehci0: timed out waiting for BIOS > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > "Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi > pci1 at ppb0 bus 1 > re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E (0x4080), > msi, address 20:89:84:45:d7:96 > rlphy0 at re0 phy 7: RTL8201E 10/100 PHY, rev. 2 > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int > 23 > ehci1: timed out waiting for BIOS > usb2 at ehci1: USB revision 2.0 > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > "Intel HM77 LPC" rev 0x04 at pci0 dev 31 function 0 not configured > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI > 1.3 > ahci0: port 1: 3.0Gb/s > scsibus0 at ahci0: 32 targets > sd0 at scsibus0 targ 1 lun 0: <ATA, WDC WD5000LPVT-0, 02.0> SCSI3 0/direct > fixed naa.50014ee6adcc4026 > sd0: 476940MB, 512 bytes/sector, 976773168 sectors > "Intel 7 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured > isa0 at mainbus0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay1 > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > uhid at uhidev0 not configured > uhub3 at uhub1 port 1 configuration 1 interface 0 "vendor 0x8087 product > 0x0024" rev 2.00/0.00 addr 2 > urtw0 at uhub3 port 2 configuration 1 interface 0 "vendor 0x0bda > RTL8187B_WLAN_Adapter" rev 2.00/2.00 addr 3 > urtw0: RTL8187B rev E, address 00:08:54:8d:f3:b1 > "Generic USB2.0-CRW" rev 2.00/39.60 addr 4 at uhub3 port 3 not configured > "Vimicro Corp. Lenovo EasyCamera" rev 2.00/12.06 addr 5 at uhub3 port 4 not > configured > uhub4 at uhub2 port 1 configuration 1 interface 0 "vendor 0x8087 product > 0x0024" rev 2.00/0.00 addr 2 > softraid0 at root > scsibus1 at softraid0: 256 targets > root on rd0a swap on rd0b dump on rd0b > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > uhid at uhidev0 not configured > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > uhid at uhidev0 not configured > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > uhid at uhidev0 not configured > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > uhid at uhidev0 not configured > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > uhid at uhidev0 not configured > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > uhid at uhidev0 not configured > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > uhid at uhidev0 not configured > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > uhid at uhidev0 not configured > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > uhid at uhidev0 not configured > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > uhid at uhidev0 not configured > uid 0 on /mnt/usr: file system full > uid 0 on /mnt/usr: file system full > uid 0 on /mnt/usr: file system full > uid 0 on /mnt/usr: file system full > uid 0 on /mnt/usr: file system full > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > uhid at uhidev0 not configured > uhidev0 detached > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > uhid at uhidev0 not configured > syncing disks... > OpenBSD 6.1-current (GENERIC.MP) #115: Sat Jul 22 09:58:21 MDT 2017 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > RTC BIOS diagnostic error 80<clock_battery> > real mem = 4140773376 (3948MB) > avail mem = 4009488384 (3823MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6fd0 (61 entries) > bios0: vendor LENOVO version "6DCN92WW(V8.06)" date 02/21/2013 > bios0: LENOVO VIUS3 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SLIC UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP > FPDT MSDM SSDT SSDT DMAR > acpi0: wakeup devices P0P1(S0) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S0) PXSX(S3) > PXSX(S3) PXSX(S3) PXSX(S3) PXSX(S3) RP05(S0) PXSX(S3) RP06(S0) PXSX(S3) > RP07(S0) PXSX(S3) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.40 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16, > xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES, > XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: TSC frequency 1696398340 Hz > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.15 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16, > xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES, > XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 1, core 0, package 0 > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.15 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16, > xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES, > XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 1, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.15 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16, > xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES, > XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 1, core 1, package 0 > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (P0P1) > acpiprt2 at acpi0: bus 1 (RP01) > acpiprt3 at acpi0: bus -1 (RP02) > acpiprt4 at acpi0: bus -1 (RP03) > acpiprt5 at acpi0: bus -1 (RP04) > acpiprt6 at acpi0: bus -1 (RP05) > acpiprt7 at acpi0: bus -1 (RP06) > acpiprt8 at acpi0: bus -1 (RP07) > acpiprt9 at acpi0: bus -1 (RP08) > acpiprt10 at acpi0: bus -1 (PEG0) > acpiprt11 at acpi0: bus -1 (PEG1) > acpiprt12 at acpi0: bus -1 (PEG2) > acpiprt13 at acpi0: bus -1 (PEG3) > acpiec0 at acpi0 > acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpitz0 at acpi0: critical temperature is 127 degC > "INT3F0D" at acpi0 not configured > acpibtn0 at acpi0: PWRB > "IDEA0100" at acpi0 not configured > "SYN2B04" at acpi0 not configured > "VPC2004" at acpi0 not configured > "AOA2011" at acpi0 not configured > acpibat0 at acpi0: BAT1 model "PABAS0241231" serial 41167 type Li-Ion oem > "LENOVO " > acpiac0 at acpi0: AC unit online > acpibtn1 at acpi0: LID0 > "INT340E" at acpi0 not configured > acpivideo0 at acpi0: VGA_ > acpivideo1 at acpi0: VGA_ > acpivideo2 at acpi0: GFX0 > acpivout0 at acpivideo2: DD02 > cpu0: Enhanced SpeedStep 1696 MHz: speeds: 1701, 1700, 1600, 1500, 1400, > 1300, 1200, 1100, 1000, 900, 800, 782 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 > drm0 at inteldrm0 > inteldrm0: msi > inteldrm0: 1366x768, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int > 16 > ehci0: timed out waiting for BIOS > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi > azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi > pci1 at ppb0 bus 1 > re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E (0x4080), > msi, address 20:89:84:45:d7:96 > rlphy0 at re0 phy 7: RTL8201E 10/100 PHY, rev. 2 > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int > 23 > ehci1: timed out waiting for BIOS > usb2 at ehci1: USB revision 2.0 > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 "Intel HM77 LPC" rev 0x04 > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI > 1.3 > ahci0: port 1: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 1 lun 0: <ATA, WDC WD5000LPVT-0, 02.0> SCSI3 0/direct > fixed naa.50014ee6adcc4026 > sd0: 476940MB, 512 bytes/sector, 976773168 sectors > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 0 > int 19 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x840300 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch > fifo underrun on pch transcoder A > error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH > transcoder A FIFO underrun > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical > Mouse" rev 2.00/72.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse1 at ums0 mux 0 > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.00 addr 2 > urtw0 at uhub3 port 2 configuration 1 interface 0 "Realtek RTL8187B" rev > 2.00/2.00 addr 3 > urtw0: RTL8187B rev E, address 00:08:54:8d:f3:b1 > ugen0 at uhub3 port 3 "Generic USB2.0-CRW" rev 2.00/39.60 addr 4 > uvideo0 at uhub3 port 4 configuration 1 interface 0 "Vimicro Corp. Lenovo > EasyCamera" rev 2.00/12.06 addr 5 > video0 at uvideo0 > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.00 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (70c53ab2024e9707.a) swap on sd0b dump on sd0b > $ cat /va > $ cat > /var/ > > $ cat /var/ lo > > > log/ lost+found/ > > $ cat /var/lo g/X > $ cat > /var/log/Xorg.0.log > > $ cat /var/log/Xorg.0.log > > > [ 45.293] (--) checkDevMem: using aperture driver /dev/xf86 > [ 45.313] (--) Using wscons driver on /dev/ttyC4 > [ 45.371] > X.Org X Server 1.18.4 > Release Date: 2016-07-19 > [ 45.371] X Protocol Version 11, Revision 0 > [ 45.371] Build Operating System: OpenBSD 6.1 amd64 > [ 45.371] Current Operating System: OpenBSD S400 6.1 GENERIC.MP#115 > amd64 > [ 45.372] Build Date: 22 July 2017 10:13:35AM > [ 45.372] > [ 45.372] Current version of pixman: 0.34.0 > [ 45.372] Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > [ 45.372] Markers: (--) probed, (**) from config file, (==) default > setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > [ 45.372] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 22 > 18:02:56 2017 > [ 45.393] (==) Using system config directory > "/usr/X11R6/share/X11/xorg.conf.d" > [ 45.425] (==) No Layout section. Using the first Screen section. > [ 45.436] (==) No screen section available. Using defaults. > [ 45.436] (**) |-->Screen "Default Screen Section" (0) > [ 45.436] (**) | |-->Monitor "<default monitor>" > [ 45.461] (==) No monitor specified for screen "Default Screen Section". > Using a default monitor configuration. > [ 45.461] (==) Disabling SIGIO handlers for input devices > [ 45.484] (==) Automatically adding devices > [ 45.484] (==) Automatically enabling devices > [ 45.484] (==) Not automatically adding GPU devices > [ 45.500] (==) Max clients allowed: 256, resource mask: 0x1fffff > [ 45.500] (==) FontPath set to: > /usr/X11R6/lib/X11/fonts/misc/, > /usr/X11R6/lib/X11/fonts/TTF/, > /usr/X11R6/lib/X11/fonts/OTF/, > /usr/X11R6/lib/X11/fonts/Type1/, > /usr/X11R6/lib/X11/fonts/100dpi/, > /usr/X11R6/lib/X11/fonts/75dpi/ > [ 45.500] (==) ModulePath set to "/usr/X11R6/lib/modules" > [ 45.500] (II) The server relies on wscons to provide the list of input > devices. > If no devices become available, reconfigure wscons or disable > AutoAddDevices. > [ 45.525] (II) Loader magic: 0x1cfd24533020 > [ 45.525] (II) Module ABI versions: > [ 45.525] X.Org ANSI C Emulation: 0.4 > [ 45.525] X.Org Video Driver: 20.0 > [ 45.525] X.Org XInput driver : 22.1 > [ 45.525] X.Org Server Extension : 9.0 > [ 45.570] (--) PCI:*(0:0:2:0) 8086:0166:17aa:3977 rev 9, Mem @ > 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00003000/64 > [ 45.570] (II) LoadModule: "glx" > [ 45.573] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so > [ 46.053] (II) Module glx: vendor="X.Org Foundation" > [ 46.053] compiled for 1.18.4, module version = 1.0.0 > [ 46.053] ABI class: X.Org Server Extension, version 9.0 > [ 46.053] (==) AIGLX enabled > [ 46.057] (==) Matched modesetting as autoconfigured driver 0 > [ 46.057] (==) Matched vesa as autoconfigured driver 1 > [ 46.057] (==) Assigned the driver to the xf86ConfigLayout > [ 46.057] (II) LoadModule: "modesetting" > [ 46.058] (II) Loading /usr/X11R6/lib/modules/ > drivers/modesetting_drv.so > [ 46.059] (II) Module modesetting: vendor="X.Org Foundation" > [ 46.059] compiled for 1.18.4, module version = 1.18.4 > [ 46.059] Module class: X.Org Video Driver > [ 46.059] ABI class: X.Org Video Driver, version 20.0 > [ 46.059] (II) LoadModule: "vesa" > [ 46.060] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so > [ 46.083] (II) Module vesa: vendor="X.Org Foundation" > [ 46.083] compiled for 1.18.4, module version = 2.3.4 > [ 46.083] Module class: X.Org Video Driver > [ 46.083] ABI class: X.Org Video Driver, version 20.0 > [ 46.084] (II) modesetting: Driver for Modesetting Kernel Drivers: kms > [ 46.084] (II) VESA: driver for VESA chipsets: vesa > [ 46.085] (**) modeset(0): claimed PCI slot 0@0:2:0 > [ 46.085] (II) modeset(0): using default device > [ 46.085] (WW) Falling back to old probe method for vesa > [ 46.087] (II) modeset(0): Creating default Display subsection in Screen > section > "Default Screen Section" for depth/fbbpp 24/32 > [ 46.087] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 > [ 46.087] (==) modeset(0): RGB weight 888 > [ 46.087] (==) modeset(0): Default visual is TrueColor > [ 46.087] (II) Loading sub module "glamoregl" > [ 46.087] (II) LoadModule: "glamoregl" > [ 46.090] (II) Loading /usr/X11R6/lib/modules/libglamoregl.so > [ 46.167] (II) Module glamoregl: vendor="X.Org Foundation" > [ 46.167] compiled for 1.18.4, module version = 1.0.0 > [ 46.167] ABI class: X.Org ANSI C Emulation, version 0.4 > [ 46.167] (II) glamor: OpenGL accelerated X.org driver based. > [ 46.519] (II) glamor: EGL version 1.4 (DRI2): > [ 46.645] (II) modeset(0): glamor initialized > [ 46.645] (II) modeset(0): Output LVDS-1 has no monitor section > [ 46.918] (II) modeset(0): Output VGA-1 has no monitor section > [ 46.919] (II) modeset(0): Output HDMI-1 has no monitor section > [ 46.934] (II) modeset(0): Output DP-1 has no monitor section > [ 46.935] (II) modeset(0): EDID for output LVDS-1 > [ 46.935] (II) modeset(0): Manufacturer: AUO Model: 233c Serial#: 0 > [ 46.935] (II) modeset(0): Year: 2012 Week: 0 > [ 46.935] (II) modeset(0): EDID Version: 1.4 > [ 46.935] (II) modeset(0): Digital Display Input > [ 46.935] (II) modeset(0): 6 bits per channel > [ 46.935] (II) modeset(0): Digital interface is undefined > [ 46.935] (II) modeset(0): Max Image Size [cm]: horiz.: 31 vert.: 17 > [ 46.935] (II) modeset(0): Gamma: 2.20 > [ 46.935] (II) modeset(0): No DPMS capabilities specified > [ 46.935] (II) modeset(0): Supported color encodings: RGB 4:4:4 > [ 46.935] (II) modeset(0): First detailed timing is preferred mode > [ 46.935] (II) modeset(0): Preferred mode is native pixel format and > refresh rate > [ 46.935] (II) modeset(0): redX: 0.580 redY: 0.335 greenX: 0.330 > greenY: 0.565 > [ 46.935] (II) modeset(0): blueX: 0.155 blueY: 0.140 whiteX: 0.313 > whiteY: 0.329 > [ 46.935] (II) modeset(0): Manufacturer's mask: 0 > [ 46.936] (II) modeset(0): Supported detailed timing: > [ 46.936] (II) modeset(0): clock: 75.0 MHz Image Size: 309 x 173 mm > [ 46.936] (II) modeset(0): h_active: 1366 h_sync: 1404 h_sync_end 1426 > h_blank_end 1572 h_border: 0 > [ 46.936] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 777 > v_blanking: 794 v_border: 0 > [ 46.936] (II) modeset(0): Unknown vendor-specific block f > [ 46.936] (II) modeset(0): AUO > [ 46.936] (II) modeset(0): B140XTN02.3 > [ 46.936] (II) modeset(0): EDID (in hex): > [ 46.936] (II) modeset(0): 00ffffffffffff0006af3c2300000000 > [ 46.936] (II) modeset(0): 00160104901f117802bbf59455549027 > [ 46.936] (II) modeset(0): 23505400000001010101010101010101 > [ 46.936] (II) modeset(0): 0101010101014a1d56ce50001a302616 > [ 46.936] (II) modeset(0): 360035ad100000180000000f00000000 > [ 46.936] (II) modeset(0): 00000000000000000020000000fe0041 > [ 46.936] (II) modeset(0): 554f0a202020202020202020000000fe > [ 46.936] (II) modeset(0): 004231343058544e30322e33200a0089 > [ 46.937] (II) modeset(0): Printing probed modes for output LVDS-1 > [ 46.937] (II) modeset(0): Modeline "1366x768"x60.1 74.98 1366 1404 > 1426 1572 768 771 777 794 -hsync -vsync (47.7 kHz eP) > [ 46.937] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 > 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d) > [ 46.937] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 > 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) > [ 46.937] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 > 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d) > [ 46.937] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 > 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d) > [ 46.937] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 > 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d) > [ 46.937] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 > 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d) > [ 46.937] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 > 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) > [ 46.937] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 > 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) > [ 46.937] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 > 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d) > [ 46.937] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 > 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d) > [ 46.937] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 > 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d) > [ 46.937] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 > 800 480 490 492 525 -hsync -vsync (31.5 kHz d) > [ 46.937] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 > 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d) > [ 46.937] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 > 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d) > [ 46.937] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 > 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d) > [ 46.937] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 > 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d) > [ 47.213] (II) modeset(0): EDID for output VGA-1 > [ 47.214] (II) modeset(0): EDID for output HDMI-1 > [ 47.229] (II) modeset(0): EDID for output DP-1 > [ 47.229] (II) modeset(0): Output LVDS-1 connected > [ 47.229] (II) modeset(0): Output VGA-1 disconnected > [ 47.229] (II) modeset(0): Output HDMI-1 disconnected > [ 47.229] (II) modeset(0): Output DP-1 disconnected > [ 47.229] (II) modeset(0): Using exact sizes for initial modes > [ 47.229] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 > +0+0 > [ 47.229] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless > otherwise stated. > [ 47.230] (==) modeset(0): DPI set to (96, 96) > [ 47.230] (II) Loading sub module "fb" > [ 47.230] (II) LoadModule: "fb" > [ 47.232] (II) Loading /usr/X11R6/lib/modules/libfb.so > [ 47.280] (II) Module fb: vendor="X.Org Foundation" > [ 47.280] compiled for 1.18.4, module version = 1.0.0 > [ 47.280] ABI class: X.Org ANSI C Emulation, version 0.4 > [ 47.280] (II) UnloadModule: "vesa" > [ 47.280] (II) Unloading vesa > [ 47.281] (==) Depth 24 pixmap format is 32 bpp > [ 48.080] (==) modeset(0): Backing store enabled > [ 48.080] (==) modeset(0): Silken mouse disabled > [ 48.088] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR > disabled message. > [ 48.115] (==) modeset(0): DPMS enabled > [ 48.116] (WW) modeset(0): DRI2: glamor lacks support for pixmap > import/export > [ 48.117] (II) modeset(0): [DRI2] Setup complete > [ 48.117] (II) modeset(0): [DRI2] DRI driver: i965 > [ 48.117] (II) modeset(0): [DRI2] VDPAU driver: i965 > [ 48.132] (--) RandR disabled > [ 48.197] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer > [ 48.197] (II) AIGLX: enabled GLX_ARB_create_context > [ 48.197] (II) AIGLX: enabled GLX_ARB_create_context_profile > [ 48.197] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile > [ 48.197] (II) AIGLX: enabled GLX_INTEL_swap_event > [ 48.197] (II) AIGLX: enabled GLX_SGI_swap_control and > GLX_MESA_swap_control > [ 48.197] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB > [ 48.197] (II) AIGLX: enabled GLX_ARB_fbconfig_float > [ 48.197] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float > [ 48.197] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer > objects > [ 48.197] (II) AIGLX: enabled GLX_ARB_create_context_robustness > [ 48.198] (II) AIGLX: Loaded and initialized i965 > [ 48.198] (II) GLX: Initialized DRI2 GL provider for screen 0 > [ 48.213] (II) modeset(0): Damage tracking initialized > [ 48.213] (II) modeset(0): Setting screen physical size to 361 x 203 > [ 48.948] (II) config/wscons: checking input device /dev/wskbd > [ 48.948] (II) wskbd: using layout pt > [ 48.948] (II) wskbd: using variant fr > [ 48.948] (II) LoadModule: "kbd" > [ 48.951] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so > [ 48.960] (II) Module kbd: vendor="X.Org Foundation" > [ 48.960] compiled for 1.18.4, module version = 1.9.0 > [ 48.960] Module class: X.Org XInput Driver > [ 48.960] ABI class: X.Org XInput driver, version 22.1 > [ 48.960] (II) Using input driver 'kbd' for '/dev/wskbd' > [ 48.960] (**) /dev/wskbd: always reports core events > [ 48.960] (**) /dev/wskbd: always reports core events > [ 48.960] (**) Option "Protocol" "standard" > [ 48.960] (**) Option "XkbRules" "base" > [ 48.960] (**) Option "XkbModel" "pc105" > [ 48.960] (**) Option "XkbLayout" "pt" > [ 48.960] (**) Option "XkbVariant" "fr" > [ 48.960] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: > KEYBOARD, id 6) > [ 49.045] (EE) Error loading keymap /tmp/server-0.xkm > [ 49.045] (EE) XKB: Failed to load keymap. Loading default keymap > instead. > [ 49.285] (II) config/wscons: checking input device /dev/wsmouse0 > [ 49.285] (**) /dev/wsmouse0: Applying InputClass "touchpad catchall" > [ 49.285] (**) /dev/wsmouse0: Applying InputClass "Default clickpad > buttons" > [ 49.285] (II) LoadModule: "synaptics" > [ 49.288] (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.so > [ 49.313] (II) Module synaptics: vendor="X.Org Foundation" > [ 49.313] compiled for 1.18.4, module version = 1.9.0 > [ 49.313] Module class: X.Org XInput Driver > [ 49.313] ABI class: X.Org XInput driver, version 22.1 > [ 49.313] (II) Using input driver 'synaptics' for '/dev/wsmouse0' > [ 49.313] (**) /dev/wsmouse0: always reports core events > [ 49.314] (**) Option "Device" "/dev/wsmouse0" > [ 49.550] (--) synaptics: /dev/wsmouse0: x-axis range 1472 - 5664 > resolution 42 > [ 49.550] (--) synaptics: /dev/wsmouse0: y-axis range 1408 - 4682 > resolution 52 > [ 49.550] (**) /dev/wsmouse0: always reports core events > [ 49.554] (II) XINPUT: Adding extended input device "/dev/wsmouse0" > (type: TOUCHPAD, id 7) > [ 49.554] (**) synaptics: /dev/wsmouse0: (accel) MinSpeed is now > constant deceleration 2.5 > [ 49.554] (**) synaptics: /dev/wsmouse0: (accel) MaxSpeed is now 1.75 > [ 49.554] (**) synaptics: /dev/wsmouse0: (accel) AccelFactor is now > 0.038 > [ 49.555] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1 > [ 49.555] (**) /dev/wsmouse0: (accel) acceleration profile 1 > [ 49.555] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000 > [ 49.555] (**) /dev/wsmouse0: (accel) acceleration threshold: 4 > [ 49.672] (II) config/wscons: checking input device /dev/wsmouse > [ 49.672] (II) LoadModule: "ws" > [ 49.675] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so > [ 49.721] (II) Module ws: vendor="X.Org Foundation" > [ 49.721] compiled for 1.18.4, module version = 1.3.0 > [ 49.721] Module class: X.Org XInput Driver > [ 49.721] ABI class: X.Org XInput driver, version 22.1 > [ 49.721] (II) Using input driver 'ws' for '/dev/wsmouse' > [ 49.721] (**) /dev/wsmouse: always reports core events > [ 49.722] (II) ws: /dev/wsmouse: debuglevel 0 > [ 49.722] (**) Option "Device" "/dev/wsmouse" > [ 49.722] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5 > [ 49.722] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7 > [ 49.722] (**) ws: /dev/wsmouse: associated screen: 0 > [ 49.722] (II) ws: /dev/wsmouse: minimum x position: 0 > [ 49.722] (II) ws: /dev/wsmouse: maximum x position: 1365 > [ 49.722] (II) ws: /dev/wsmouse: minimum y position: 0 > [ 49.722] (II) ws: /dev/wsmouse: maximum y position: 767 > [ 49.722] (==) ws: /dev/wsmouse: Buttons: 7 > [ 49.723] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5 > [ 49.723] (II) XINPUT: Adding extended input device "/dev/wsmouse" > (type: MOUSE, id 8) > [ 49.723] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1 > [ 49.723] (**) /dev/wsmouse: (accel) acceleration profile 0 > [ 49.723] (**) /dev/wsmouse: (accel) acceleration factor: 2.000 > [ 49.723] (**) /dev/wsmouse: (accel) acceleration threshold: 4 > [ 116.255] (II) modeset(0): EDID vendor "AUO", prod id 9020 > [ 116.255] (II) modeset(0): Printing DDC gathered Modelines: > [ 116.256] (II) modeset(0): Modeline "1366x768"x0.0 74.98 1366 1404 > 1426 1572 768 771 777 794 -hsync -vsync (47.7 kHz eP) > [ 1050.088] (II) modeset(0): EDID vendor "AUO", prod id 9020 > [ 1050.088] (II) modeset(0): Printing DDC gathered Modelines: > [ 1050.088] (II) modeset(0): Modeline "1366x768"x0.0 74.98 1366 1404 > 1426 1572 768 771 777 794 -hsync -vsync (47.7 kHz eP) > $ exit > > > > Script done on Sat Jul 22 18:59:15 2017 > Script started on Sat Jul 22 19:03:59 2017 > $ xra > $ > xrandr > > $ xrandr -q > > > Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 > LVDS-1 connected 1366x768+0+0 (normal left inverted right x axis y axis) > 309mm x 173mm > 1366x768 60.07*+ > 1024x768 60.04 60.00 > 960x720 60.00 > 928x696 60.05 > 896x672 60.01 > 800x600 60.00 60.32 56.25 > 700x525 59.98 > 640x512 60.02 > 640x480 60.00 59.94 > 512x384 60.00 > 400x300 60.32 56.34 > 320x240 60.05 > VGA-1 disconnected (normal left inverted right x axis y axis) > HDMI-1 disconnected (normal left inverted right x axis y axis) > DP-1 disconnected (normal left inverted right x axis y axis) >