Hello,
I just want to inform you that the problems are resolved with the current
OpenBSD 3.9 bootfloppy
(ftp://ftp.openbsd.org/pub/OpenBSD/snapshots/i386/floppy39.fs). I just
added to the bootfloppy /etc/boot.conf (for console output via serial
port) and the network works without any problems ;)
Here is my current dmesg:
OpenBSD 3.9-beta (RAMDISK) #1003: Thu Jan 19 12:54:01 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK
cpu0: Intel(R) Celeron(R) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC
A,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS, HTT,TM,SBF,CNXT-ID
real mem = 536387584 (523816K)
avail mem = 485257216 (473884K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(c0) BIOS, date 05/27/03, BIOS32 rev. 0 @ 0xfb330
apm0 at bios0: Power Management spec V1.2
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde90/240 (13 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x05
pci2 at ppb1 bus 2
fxp0 at pci2 dev 6 function 0 "Intel 8255x" rev 0x08, i82559: irq 12,
address 00:30:48:52:c9:fc
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci2 dev 7 function 0 "Intel 8255x" rev 0x08, i82559: irq 12,
address 00:30:48:52:c9:fd
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci2 dev 8 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ExcelStor Technology J360>
wd0: 16-sector PIO, LBA48, 58644MB, 120103200 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
"Intel 82801BA SMBus" rev 0x05 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask efe5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
Best regards,
Sven
> Hello,
>
> I've a server at the German hoster Strato and I try to install OpenBSD
> 3.8 on this machine. But I always get a device timeout of the Intel Nic
> (because of a wrong irq assignment?) :(
>
> Here is the dmesg output:
>
> OpenBSD 3.8 (RAMDISK) #9: Tue Jan 17 18:24:51 CET 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK
> cpu0: Intel(R) Celeron(R) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,
> ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
> real mem = 536387584 (523816K)
> avail mem = 485179392 (473808K)
> using 4278 buffers containing 26923008 bytes (26292K) of memory
> mainbus0 (root)
> acpi0 at mainbus0: revision 0 attached
> acpitimer at acpi0 not configured
> acpi device at acpi0 from table DSDT not configured
> acpi device at acpi0 from table FACP not configured
> bios0 at mainbus0: AT/286+(c0) BIOS, date 05/27/03, BIOS32 rev. 0 @
> 0xfb330
> apm0 at bios0: Power Management spec V1.2
> apm0: flags 70102 dobusy 1 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde90/240 (13 entries)
> pcibios0: PCI Exclusive IRQs: 5 10 11 12
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00)
> pcibios0: PCI bus #2 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
> ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x05
> pci2 at ppb1 bus 2
> fxp0 at pci2 dev 6 function 0 "Intel 82557" rev 0x08, i82559: irq 12,
> address 00 :30:48:52:c9:fc
> inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
> fxp1 at pci2 dev 7 function 0 "Intel 82557" rev 0x08, i82559: irq 12,
> address 00 :30:48:52:c9:fd
> inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
> vga1 at pci2 dev 8 function 0 "ATI Rage XL" rev 0x27
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05: failed
> to map I /O space
> pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA,
> channel 0 w ired to compatibility, channel 1
> wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <ExcelStor Technology J360>
> wd0: 16-sector PIO, LBA48, 58644MB, 120103200 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> pciide0: channel 1 disabled (no drives)
> "Intel 82801BA SMBus" rev 0x05 at pci0 dev 31 function 3 not configured
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom0: console
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask ede5 netmask fde5 ttymask ffe7
> rd0: fixed, 3800 blocks
> dkcsum: wd0 matches BIOS drive 0x80
> root on rd0a
> rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
>
> I've created my own bootfloppy because with the default OpenBSD 3.8
> bootfloppy I get the same error. I've played (enabled/disabled) with
> following kernel options without luck:
>
> option PCIBIOS_INTR_FIXUP_FORCE
> option PCI_INTR_FIXUP (as for the netbsd kernel)
> option USER_PCICONF # user-space PCI configuration
> option BOOT_CONFIG # boot-time kernel config
> pcibios0 at bios0 flags 0x0008 (set to 0x0004, 0x0008, 0x0030)
> acpi0 at mainbus?
> #acpitimer* at acpi?
> #hpet* at acpi?
> option ACPIVERBOSE
> option ACPI_ENABLE
>
> Has anyone any idea how I can assign an another irq than 12 to fxp? In
> my opinion this is the problem :(
>
> Thanks and best regards,
> Sven
