On Wed, Jul 26, 2017 at 12:52:01PM +0200, Joaquín Herrero Pintado wrote:
> Hi,
>
> I'm just trying vmm from OpenBSD 6.1 on a HP Proliant DL360p Gen8 and I'm
> having some issues I want to share just to help developers. I will be glad
> in using this machine to host a bunch of OpenBSD machines with relayd,
> httpd, etc to host services and help balancing other services from my
> organisation.
>
> Here are the things I detected:
>
> 1. In spite of booting bsd (or bsd.mp) from cd0a, after this the device cd0
> is not detected by the kernel and so is not available to install the sets.
> I managed to install OpenBSD from http. You can see on dmesg output that
> no cd0 device is detected.
> 2. On dmesg there are some timeouts on pciide0:0:0: device
> 3. Also on dmesg, after detecting pci15 at mainbus0 bus 32, there are
> several mem address conflicts
>
> I don't know if (2) and (3) are related with the panic.
>
> After getting root prompt I used fw_update to get vmm-bios.
>
> I created and mounted a partition on /var/vmm to store there all vm images.
>
> Then I tried start a new vm test machine using the same example as in
> vmctl(8) man page:
>
> # cd /var/vmm
> # vmctl create disk.img -s 4.5G
> vmctl: imagefile created
> # vmctl start "myvm" -m 1G -i 1 -d disk.img
> vmctl: started vm 1 successfully, tty /dev/ttyp1
> # vmctl status
> ID PID VCPUS MAXMEM CURMEM TTY OWNER NAME
> #
>
> The machine didn't appear as started so I checked log messages:
>
> # tail /var/log/messages
> (...) vmd[71615]: myvm: started vm 1 successfully, tty /dev/ttyp1
> (...) vmd[42078]: vcpu_run_loop: vm 1 / vcpu 0 run ioctl failed: Invalid
> argument
>
> While I was searching for info on this error (not touching the terminal) I
> got a kernel panic:
>
> Data modified on freelist: word 154145165 of object 0xd4e3b400 size 0x6c
> previous type pcb (invalid addr 0xd4efb280)
> uvm_fault(0xd0ba8a40, 0xd4efb000, 0, 1) -> e
> kernel: page fault trap, code=0
> Stopped at malloc+0x181: movl 0x8(%ebx),%eax
> ddb{0}>
>
While this may or may not be related to vmm, is there a reason you are using
i386 here? You probably want amd64. Note that vmm on i386 should work but it's
possible something rotted recently. I don't have hardware at the moment to
verify but I can check into it next week.
In the meantime, can you confirm you really want i386 on this machine?
-ml
>
> This is hardware description from sysctl
>
> # sysctl hw
> hw.machine=i386
> hw.model=Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz ("GenuineIntel"
> 686-class)
> hw.ncpu=32
> hw.byteorder=1234
> hw.pagesize=4096
> hw.disknames=sd0:49c998d38dc7ac33
> hw.diskcount=1
> hw.sensors.acpitz0.temp0=8.30 degC (zone temperature)
> hw.sensors.cpu0.temp0=37.00 degC
> hw.sensors.ciss0.drive0=online (sd0), OK
> hw.cpuspeed=2594
> hw.setperf=100
> hw.vendor=HP
> hw.product=ProLiant DL360p Gen8
> hw.serialno=CZJ448063M
> hw.uuid=36353430-3831-435a-4a34-34383036334d
> hw.physmem=3184709632
> hw.usermem=3182665728
> hw.ncpufound=32
> hw.allowpowerdown=1
> hw.perfpolicy=manual
>
>
> This is the dmesg. Sorry, but is truncated at the start and I don't know
> how to get it complete:
>
> ,ARAT
> cpu24 at mainbus0: apid 33 (application processor)
> cpu24: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz ("GenuineIntel" 686-class)
> 2.60 GHz
> cpu24:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu25 at mainbus0: apid 35 (application processor)
> cpu25: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz ("GenuineIntel" 686-class)
> 2.60 GHz
> cpu25:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu26 at mainbus0: apid 37 (application processor)
> cpu26: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz ("GenuineIntel" 686-class)
> 2.60 GHz
> cpu26:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu27 at mainbus0: apid 39 (application processor)
> cpu27: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz ("GenuineIntel" 686-class)
> 2.60 GHz
> cpu27:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu28 at mainbus0: apid 41 (application processor)
> cpu28: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz ("GenuineIntel" 686-class)
> 2.60 GHz
> cpu28:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu29 at mainbus0: apid 43 (application processor)
> cpu29: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz ("GenuineIntel" 686-class)
> 2.60 GHz
> cpu29:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu30 at mainbus0: apid 45 (application processor)
> cpu30: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz ("GenuineIntel" 686-class)
> 2.60 GHz
> cpu30:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu31 at mainbus0: apid 47 (application processor)
> cpu31: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz ("GenuineIntel" 686-class)
> 2.60 GHz
> cpu31:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
> ioapic1 at mainbus0: apid 0 pa 0xfec10000, version 20, 24 pins
> ioapic2 at mainbus0: apid 10 pa 0xfec40000, version 20, 24 pins
> acpiprt0 at acpi0: bus 10 (IPT1)
> acpiprt1 at acpi0: bus -1 (IPT2)
> acpiprt2 at acpi0: bus -1 (IPT3)
> acpiprt3 at acpi0: bus -1 (IPT4)
> acpiprt4 at acpi0: bus -1 (IPT5)
> acpiprt5 at acpi0: bus -1 (IPT6)
> acpiprt6 at acpi0: bus -1 (IPT7)
> acpiprt7 at acpi0: bus 1 (IPT8)
> acpiprt8 at acpi0: bus 24 (VRP1)
> acpiprt9 at acpi0: bus 4 (PT1A)
> acpiprt10 at acpi0: bus 17 (PT1B)
> acpiprt11 at acpi0: bus 3 (PT2A)
> acpiprt12 at acpi0: bus 18 (PT2B)
> acpiprt13 at acpi0: bus 2 (PT2C)
> acpiprt14 at acpi0: bus 19 (PT2D)
> acpiprt15 at acpi0: bus 7 (PT3A)
> acpiprt16 at acpi0: bus 20 (PT3B)
> acpiprt17 at acpi0: bus 21 (PT3C)
> acpiprt18 at acpi0: bus 22 (PT3D)
> acpiprt19 at acpi0: bus 0 (PCI0)
> acpiprt20 at acpi0: bus 33 (PT1A)
> acpiprt21 at acpi0: bus 34 (PT1B)
> acpiprt22 at acpi0: bus 35 (PT2A)
> acpiprt23 at acpi0: bus 36 (PT2B)
> acpiprt24 at acpi0: bus 37 (PT2C)
> acpiprt25 at acpi0: bus 38 (PT2D)
> acpiprt26 at acpi0: bus 39 (PT3A)
> acpiprt27 at acpi0: bus 40 (PT3B)
> acpiprt28 at acpi0: bus 41 (PT3C)
> acpiprt29 at acpi0: bus 42 (PT3D)
> acpiprt30 at acpi0: bus 32 (PCI1)
> acpicpu0 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu1 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu2 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu3 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu4 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu5 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu6 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu7 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu8 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu9 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu10 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu11 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu12 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu13 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu14 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu15 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu16 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu17 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu18 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu19 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu20 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu21 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu22 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu23 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu24 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu25 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu26 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu27 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu28 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu29 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu30 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpicpu31 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> acpitz0 at acpi0: critical temperature is 31 degC
> "IPI0001" at acpi0 not configured
> "PNP0A06" at acpi0 not configured
> "PNP0501" at acpi0 not configured
> "PNP0303" at acpi0 not configured
> "PNP0F13" at acpi0 not configured
> "ACPI000D" at acpi0 not configured
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x3200! 0xcb200/0x4000
> 0xcf200/0x400!
> ipmi at mainbus0 not configured
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel E5 v2 Host" rev 0x04
> ppb0 at pci0 dev 1 function 0 "Intel E5 v2 PCIE" rev 0x04
> pci1 at ppb0 bus 4
> "Broadcom BCM57810" rev 0x11 at pci1 dev 0 function 0 not configured
> "Broadcom BCM57810" rev 0x11 at pci1 dev 0 function 1 not configured
> ppb1 at pci0 dev 1 function 1 "Intel E5 v2 PCIE" rev 0x04
> pci2 at ppb1 bus 17
> ppb2 at pci0 dev 2 function 0 "Intel E5 v2 PCIE" rev 0x04
> pci3 at ppb2 bus 3
> bge0 at pci3 dev 0 function 0 "Broadcom BCM5719" rev 0x01, unknown BCM5719
> (0x5719001), APE firmware NCSI 1.2.46.0: msi, address 40:a8:f0:2e:ab:d8
> brgphy0 at bge0 phy 1: BCM5719C 10/100/1000baseT PHY, rev. 0
> bge1 at pci3 dev 0 function 1 "Broadcom BCM5719" rev 0x01, unknown BCM5719
> (0x5719001), APE firmware NCSI 1.2.46.0: msi, address 40:a8:f0:2e:ab:d9
> brgphy1 at bge1 phy 2: BCM5719C 10/100/1000baseT PHY, rev. 0
> bge2 at pci3 dev 0 function 2 "Broadcom BCM5719" rev 0x01, unknown BCM5719
> (0x5719001), APE firmware NCSI 1.2.46.0: msi, address 40:a8:f0:2e:ab:da
> brgphy2 at bge2 phy 3: BCM5719C 10/100/1000baseT PHY, rev. 0
> bge3 at pci3 dev 0 function 3 "Broadcom BCM5719" rev 0x01, unknown BCM5719
> (0x5719001), APE firmware NCSI 1.2.46.0: msi, address 40:a8:f0:2e:ab:db
> brgphy3 at bge3 phy 4: BCM5719C 10/100/1000baseT PHY, rev. 0
> ppb3 at pci0 dev 2 function 1 "Intel E5 v2 PCIE" rev 0x04
> pci4 at ppb3 bus 18
> ppb4 at pci0 dev 2 function 2 "Intel E5 v2 PCIE" rev 0x04
> pci5 at ppb4 bus 2
> ciss0 at pci5 dev 0 function 0 "Hewlett-Packard Smart Array" rev 0x01: apic
> 0 int 10
> ciss0: 1 LD, HW rev 1, FW 6.00/6.00, 64bit fifo rro
> scsibus1 at ciss0: 1 targets
> sd0 at scsibus1 targ 0 lun 0: <HP, LOGICAL VOLUME, 6.00> SCSI3 0/direct
> fixed
> sd0: 139980MB, 512 bytes/sector, 286679925 sectors
> ppb5 at pci0 dev 2 function 3 "Intel E5 v2 PCIE" rev 0x04
> pci6 at ppb5 bus 19
> ppb6 at pci0 dev 3 function 0 "Intel E5 v2 PCIE" rev 0x04
> pci7 at ppb6 bus 7
> ppb7 at pci0 dev 3 function 1 "Intel E5 v2 PCIE" rev 0x04
> pci8 at ppb7 bus 20
> ppb8 at pci0 dev 3 function 2 "Intel E5 v2 PCIE" rev 0x04
> pci9 at ppb8 bus 21
> ppb9 at pci0 dev 3 function 3 "Intel E5 v2 PCIE" rev 0x04
> pci10 at ppb9 bus 22
> "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 0 not configured
> "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 1 not configured
> "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 2 not configured
> "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 3 not configured
> "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 4 not configured
> "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 5 not configured
> "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 6 not configured
> "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 7 not configured
> "Intel E5 v2 Address Map" rev 0x04 at pci0 dev 5 function 0 not configured
> "Intel E5 v2 IIO RAS" rev 0x04 at pci0 dev 5 function 2 not configured
> "Intel E5 v2 I/O APIC" rev 0x04 at pci0 dev 5 function 4 not configured
> ppb10 at pci0 dev 17 function 0 "Intel C600 Virtual PCIE" rev 0x05
> pci11 at ppb10 bus 24
> ehci0 at pci0 dev 26 function 0 "Intel C600 USB" rev 0x05: apic 8 int 21
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> ppb11 at pci0 dev 28 function 0 "Intel C600 PCIE" rev 0xb5
> pci12 at ppb11 bus 10
> ppb12 at pci0 dev 28 function 7 "Intel C600 PCIE" rev 0xb5
> pci13 at ppb12 bus 1
> "Hewlett-Packard iLO3 Slave" rev 0x05 at pci13 dev 0 function 0 not
> configured
> vga1 at pci13 dev 0 function 1 "Matrox MGA G200eH" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> "Hewlett-Packard iLO3 Management" rev 0x05 at pci13 dev 0 function 2 not
> configured
> uhci0 at pci13 dev 0 function 4 "Hewlett-Packard USB" rev 0x02: apic 8 int
> 16
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 configuration 1 interface 0 "Hewlett-Packard UHCI root hub"
> rev 1.00/1.00 addr 1
> ehci1 at pci0 dev 29 function 0 "Intel C600 USB" rev 0x05: apic 8 int 20
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
> pci14 at ppb13 bus 23
> pcib0 at pci0 dev 31 function 0 "Intel C600 LPC" rev 0x05
> pciide0 at pci0 dev 31 function 2 "Intel C600 SATA" rev 0x05: DMA, channel
> 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 8 int 17 for native-PCI interrupt
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus2 at atapiscsi0: 2 targets
> pciide0:0:0: device timeout, c_bcount=0, c_skip=0,
> status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> pciide0:0:0: device timeout, c_bcount=0, c_skip=0,
> status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> pciide0:0:0: device timeout, c_bcount=0, c_skip=0,
> status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> pciide0:0:0: device timeout, c_bcount=0, c_skip=0,
> status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> pciide0:0:0: device timeout, c_bcount=0, c_skip=0,
> status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> pciide0:0:0: device timeout, c_bcount=0, c_skip=0,
> status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> pciide0:0:0: device timeout, c_bcount=36, c_skip=0,
> status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> pciide0:0:0: device timeout, c_bcount=36, c_skip=0,
> status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> pciide0:0:0: device timeout, c_bcount=36, c_skip=0,
> status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> pciide0:0:0: device timeout, c_bcount=36, c_skip=0,
> status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> pciide0:0:0: device timeout, c_bcount=36, c_skip=0,
> status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> atapiscsi0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> com1: probed fifo depth: 0 bytes
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pci15 at mainbus0 bus 32
> 32:4:0: mem address conflict 0xfbff0000/0x4000
> 32:4:1: mem address conflict 0xfbfe0000/0x4000
> 32:4:2: mem address conflict 0xfbfd0000/0x4000
> 32:4:3: mem address conflict 0xfbfc0000/0x4000
> 32:4:4: mem address conflict 0xfbfb0000/0x4000
> 32:4:5: mem address conflict 0xfbfa0000/0x4000
> 32:4:6: mem address conflict 0xfbf90000/0x4000
> 32:4:7: mem address conflict 0xfbf80000/0x4000
> 32:5:4: mem address conflict 0xfbf70000/0x1000
> ppb14 at pci15 dev 0 function 0 "Intel E5 v2 PCIE" rev 0x04
> pci16 at ppb14 bus 43
> ppb15 at pci15 dev 1 function 0 "Intel E5 v2 PCIE" rev 0x04
> pci17 at ppb15 bus 33
> ppb16 at pci15 dev 1 function 1 "Intel E5 v2 PCIE" rev 0x04
> pci18 at ppb16 bus 34
> ppb17 at pci15 dev 2 function 0 "Intel E5 v2 PCIE" rev 0x04
> pci19 at ppb17 bus 35
> ppb18 at pci15 dev 2 function 1 "Intel E5 v2 PCIE" rev 0x04
> pci20 at ppb18 bus 36
> ppb19 at pci15 dev 2 function 2 "Intel E5 v2 PCIE" rev 0x04
> pci21 at ppb19 bus 37
> ppb20 at pci15 dev 2 function 3 "Intel E5 v2 PCIE" rev 0x04
> pci22 at ppb20 bus 38
> ppb21 at pci15 dev 3 function 0 "Intel E5 v2 PCIE" rev 0x04
> pci23 at ppb21 bus 39
> ppb22 at pci15 dev 3 function 1 "Intel E5 v2 PCIE" rev 0x04
> pci24 at ppb22 bus 40
> ppb23 at pci15 dev 3 function 2 "Intel E5 v2 PCIE" rev 0x04
> pci25 at ppb23 bus 41
> ppb24 at pci15 dev 3 function 3 "Intel E5 v2 PCIE" rev 0x04
> pci26 at ppb24 bus 42
> "Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 0 not configured
> "Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 1 not configured
> "Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 2 not configured
> "Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 3 not configured
> "Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 4 not configured
> "Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 5 not configured
> "Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 6 not configured
> "Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 7 not configured
> "Intel E5 v2 Address Map" rev 0x04 at pci15 dev 5 function 0 not configured
> "Intel E5 v2 IIO RAS" rev 0x04 at pci15 dev 5 function 2 not configured
> "Intel E5 v2 I/O APIC" rev 0x04 at pci15 dev 5 function 4 not configured
> vmm0 at mainbus0: VMX/EPT
> uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.00 addr 2
> uhidev0 at uhub3 port 6 configuration 1 interface 0 "ATEN UC-10KM V1.3.124"
> rev 1.10/1.00 addr 3
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 3
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub3 port 6 configuration 1 interface 1 "ATEN UC-10KM V1.3.124"
> rev 1.10/1.00 addr 3
> uhidev1: iclass 3/1
> ums0 at uhidev1: 5 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.00 addr 2
> uhub5 at uhub4 port 3 configuration 1 interface 0 "Standard Microsystems
> product 0x2660" rev 2.00/8.01 addr 3
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> root on sd0a (49c998d38dc7ac33.a) swap on sd0b dump on sd0b
>
> Many thanks for the help!
>
>
> ----
> Joaquin Herrero, @joakinen
> perl -le '$_="=6<678428378>12376=2>:02;:19<5>:4"; tr[0->][DREAM.IT KOWSVC];
> print'
