Hi Paul,
thanks for your help. Does tapping work when you use
the synaptics driver?
In the test setup with ws and the internal driver there
are some restrictions on tapping:
1) It is suppressed when the position is an edge area
(presumably the software button area at the bottom
edge in this case).
2) The finger must not move by more than a certain
distance, otherwise, the contact doesn't count as
"tap".
3) It is suppressed when hardware buttons are being
pressed.
Just to be sure, can you exclude that 1), 2), or 3) is
the reason for the problem? And neither one-, two-, nor
three-finger taps work?
Regards,
Ulf
On 08/04/2017 11:24 AM, Paul de Weerd wrote:
> Hi Ulf,
>
> This really helps a lot on my touchpad. I used to have the following
> config:
>
> Section "InputClass"
> Identifier "Sony VAIO touchpad"
> MatchIsTouchpad "on"
> Option "TapButton1" "1"
> Option "HasSecondarySoftButtons" "true"
> Option "ClickPad" "true"
> Option "TouchpadOff" "1"
> Option "AreaTopEdge" "20%"
> Option "SoftButtonAreas" "60% 0 82% 0 40% 60% 82% 0"
> Option "SecondarySoftButtonAreas" "60% 0 0 20% 40% 60% 0 20%"
> EndSection
>
> All from some experimentation with a bunch of buttons to try to get
> sane behaviour out of my touchpad. Without a config, there was no
> scrolling and no right button (and probably other problems I now
> forget). With your wsmouse touchpad stuff, I can scroll and have
> right click again. Speed seems also fine.
>
> On Mon, Jul 31, 2017 at 11:02:28PM +0200, Ulf Brosziewski wrote:
> | For now, X will treat the device like a mouse, please don't look for
> | touchpad-specific configuration options there. Tapping can be enabled
> | by the command
> | # wsconsctl mouse.tp.tapping=1
>
> This doesn't work on my touchpad. Also, I can't click-and-drag (never
> worked, in any combination I while playing with the driver settings).
>
> Thanks!
>
> Paul
>
> [weerd@drop] $ wsconsctl mouse
> mouse.type=synaptics
> mouse.rawmode=0
> mouse.scale=1472,5768,1408,4748,0,66,66
> mouse.tp.tapping=1
> mouse.tp.scaling=0.169
> mouse.tp.swapsides=0
> mouse.tp.disable=0
>
> OpenBSD 6.1-current (GENERIC.MP) #3: Fri Aug 4 07:49:26 CEST 2017
> we...@drop.weirdnet.nl:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8485335040 (8092MB)
> avail mem = 8221806592 (7840MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe6020 (18 entries)
> bios0: vendor INSYDE version "R1010H5" date 07/28/2011
> bios0: Sony Corporation VPCZ23C5E
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP TCPA ASF! HPET APIC MCFG SLIC WDAT SSDT BOOT SSDT
> ASPT SSDT SSDT SSDT SSDT
> acpi0: wakeup devices EHC1(S3) EHC2(S3) HDEF(S0) WLAN(S0) RP01(S0) RMSC(S0)
> RP02(S0) NXUC(S3) RP03(S3) RLAN(S3) RP04(S3) RP07(S3) PEG0(S0) PEGP(S0)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2794.06 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: TSC frequency 2794061280 Hz
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2793.66 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2793.66 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2793.66 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 2 (RP01)
> acpiprt2 at acpi0: bus 3 (RP02)
> acpiprt3 at acpi0: bus 4 (RP03)
> acpiprt4 at acpi0: bus 5 (RP04)
> acpiprt5 at acpi0: bus 8 (RP07)
> acpiprt6 at acpi0: bus -1 (PEG0)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3(350@104 mwait.1@0x20), C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(350@104 mwait.1@0x20), C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(350@104 mwait.1@0x20), C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(350@104 mwait.1@0x20), C1(1000@1 mwait.1), PSS
> acpitz0 at acpi0: critical temperature is 98 degC
> acpibat0 at acpi0: BAT1 type Lion oem "Sony Corporation"
> acpibat1 at acpi0: BAT2 not present
> "INT3F0D" at acpi0 not configured
> "PNP0303" at acpi0 not configured
> "SNY9015" at acpi0 not configured
> "SNY5001" at acpi0 not configured
> tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000: Infineon SLB9635 1.2 rev 0x10
> acpiac0 at acpi0: AC unit online
> acpibtn0 at acpi0: LID0
> acpibtn1 at acpi0: PWRB
> "INT340E" at acpi0 not configured
> acpidock0 at acpi0: DOCK not docked (0)
> acpivideo0 at acpi0: DD01
> acpivideo1 at acpi0: DD02
> acpivideo2 at acpi0: DD03
> acpivideo3 at acpi0: DD04
> acpivideo4 at acpi0: DD05
> acpivideo5 at acpi0: DD06
> acpivideo6 at acpi0: DD07
> acpivideo7 at acpi0: DD08
> acpivideo8 at acpi0: GFX0
> acpivout0 at acpivideo8: DD02
> cpu0: Enhanced SpeedStep 2794 MHz: speeds: 2801, 2800, 2400, 2200, 2000,
> 1800, 1600, 1400, 1200, 1000, 800 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
> drm0 at inteldrm0
> inteldrm0: msi
> inteldrm0: 1920x1080, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 0 int 23
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
> azalia0: codecs: Realtek/0x0275, Intel/0x2805, using Realtek/0x0275
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
> pci1 at ppb0 bus 2
> iwn0 at pci1 dev 0 function 0 "Intel Centrino Advanced-N 6030" rev 0x34: msi,
> MIMO 2T2R, MoW, address 88:53:2e:d9:dd:9d
> ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
> pci2 at ppb1 bus 3
> rtsx0 at pci2 dev 0 function 0 "Realtek RTS5209 Card Reader" rev 0x01: msi
> sdmmc0 at rtsx0: 4-bit
> ppb2 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi
> pci3 at ppb2 bus 4
> xhci0 at pci3 dev 0 function 0 "NEC xHCI" rev 0x04: msi
> usb1 at xhci0: USB revision 3.0
> uhub1 at usb1 configuration 1 interface 0 "NEC xHCI root hub" rev 3.00/1.00
> addr 1
> ppb3 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi
> pci4 at ppb3 bus 5
> re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL
> (0x2c80), msi, address 54:42:49:9b:1e:1a
> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
> ppb4 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb4: msi
> pci5 at ppb4 bus 8
> ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 0 int 20
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> pcib0 at pci0 dev 31 function 0 "Intel HM67 LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 82801HBM RAID" rev 0x04: msi, AHCI 1.3
> ahci0: port 0: 6.0Gb/s
> ahci0: port 1: 6.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZRPC128, CXM0> SCSI3 0/direct
> fixed naa.50000f0043584d30
> sd0: 61057MB, 512 bytes/sector, 125045424 sectors, thin
> sd1 at scsibus1 targ 1 lun 0: <ATA, SAMSUNG MZRPC128, CXM0> SCSI3 0/direct
> fixed naa.50000f0043584d30
> sd1: 61057MB, 512 bytes/sector, 125045424 sectors, thin
> ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 0 int
> 22
> iic0 at ichiic0
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x840300
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT
> uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.00 addr 2
> ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/25.01 addr 3
> ugen1 at uhub3 port 2 "Intel product 0x0189" rev 2.00/69.19 addr 4
> uvideo0 at uhub3 port 3 configuration 1 interface 0 "Ricoh Company Ltd.
> USB2.0 Camera" rev 2.00/1.36 addr 5
> video0 at uvideo0
> uhidev0 at uhub1 port 4 configuration 1 interface 0 "Logitech USB Receiver"
> rev 2.00/24.00 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub1 port 4 configuration 1 interface 1 "Logitech USB Receiver"
> rev 2.00/24.00 addr 2
> uhidev1: iclass 3/1, 8 report ids
> ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
> wsmouse1 at ums0 mux 0
> uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
> uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
> uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
> uhidev2 at uhub1 port 4 configuration 1 interface 2 "Logitech USB Receiver"
> rev 2.00/24.00 addr 2
> uhidev2: iclass 3/0, 33 report ids
> uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
> uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
> uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
> uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
> uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.00 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
> sd2: 61051MB, 512 bytes/sector, 125033303 sectors
> root on sd2a (07731febbfe28d7d.a) swap on sd2b dump on sd2b
>
