On Sun, Aug 06, 2017 at 08:07:25PM +0200, Stephane HUC "PengouinBSD" wrote: > Hi all. > > I have this problem to run vmctl: > > $ doas vmctl start "webdev" -c -b bsd.rd -m 1024M -i 1 -d www.drive -d > install61.fs > vmctl: start vm command failed: Operation not permitted > > I can use virtualization on my desktop; it's an Core i5 intel : > > $ dmesg | grep vmm > vmm0 at mainbus0: VMX/EPT > > I attempt to use on OpenBSD 6.1 -stable : > > $ uname -a > OpenBSD ptb.stephane-huc.net 6.1 GENERIC.MP#19 amd64 > > The config seems correct: > > $ doas vmd -n > configuration OK > > ifconfig results: >
pkill -9 vmd vmd -dv (will not detach from the console) vmctl log verbose then try your vmctl again, and send the vmd log messages displayed in the window where vmd is running. Also send a dmesg please. We'll start there and see if we need more info. Thanks for helping test vmd -ml > (...) > vether0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 > lladdr fe:e1:ba:d0:01:02 > index 4 priority 0 llprio 3 > groups: vether > media: Ethernet autoselect > status: active > inet 192.168.247.1 netmask 0xffffff00 broadcast 192.168.247.255 > inet6 fe80::fce1:baff:fed0:102%vether0 prefixlen 64 scopeid 0x4 > inet6 fd47:c107:b5d::247:1 prefixlen 64 > (...) > bridge0: flags=41<UP,RUNNING> > description: switch1-h2g2 > index 8 llprio 3 > groups: bridge > priority 32768 hellotime 2 fwddelay 15 maxage 20 holdcnt 6 proto > rstp > vether0 flags=3<LEARNING,DISCOVER> > port 4 ifpriority 0 ifcost 0 > tap0 flags=3<LEARNING,DISCOVER> > port 9 ifpriority 0 ifcost 0 > tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 > lladdr fe:e1:ba:d2:3d:0c > description: vm1-if0-webdev > index 9 priority 0 llprio 3 > groups: tap > status: active > > An idea to explain-me why vmctl failed to start? > > > -- > ~ " Fully Basic System Distinguish Life! " ~ " Libre as a BSD " +=<<< > ---- > <me>Stephane HUC as PengouinBSD or CIOTBSD</me> > <mail>[email protected]</mail> >
