On 09/13/17 22:28, Dante F. B. Colò wrote: > Hi > > I'm think about get a Ubiquiti Edgerouter box and drop openbsd there. > I read the instalation file and was not clear to me if the current > MIPS/Octeon kernel implementation supports SMP or not , does it support ? > > Regards > > Dante F. B. Colò > Yes it does, just don't forget to set numcores/coremask in the boot command.
Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2017 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 6.1 (GENERIC.MP) #0: Mon Apr 3 08:08:00 UTC 2017 visa@octeon:/usr/src/sys/arch/octeon/compile/GENERIC.MP real mem = 2147483648 (2048MB) avail mem = 2113486848 (2015MB) warning: no entropy supplied by boot loader mainbus0 at root cpu0 at mainbus0: CN61xx CPU rev 0.1 800 MHz, Software FP emulation cpu0: cache L1-I 512KB D 8KB 64 way, L2 1024KB 8 way cpu1 at mainbus0: CN61xx CPU rev 0.1 800 MHz, Software FP emulation cpu1: cache L1-I 512KB D 8KB 64 way, L2 1024KB 8 way clock0 at mainbus0: int 5 iobus0 at mainbus0 octuctl0 at iobus0 base 0x118006f000000 irq 56 ehci0 at octuctl0 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Octeon EHCI root hub" rev 2.00/1.00 addr 1 ohci0 at octuctl0, version 1.0 usb1 at ohci0: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "Octeon OHCI root hub" rev 1.00/1.00 addr 1 octrng0 at iobus0 base 0x1400000000000 irq 0 cn30xxgmx0 at iobus0 base 0x1180008000000 cnmac0 at cn30xxgmx0: SGMII, address 24:a4:3c:06:a2:72 ukphy0 at cnmac0 phy 4: Generic IEEE 802.3u media interface, rev. 3: OUI 0x180361, model 0x0004 cnmac1 at cn30xxgmx0: SGMII, address 24:a4:3c:06:a2:73 ukphy1 at cnmac1 phy 5: Generic IEEE 802.3u media interface, rev. 3: OUI 0x180361, model 0x0004 cnmac2 at cn30xxgmx0: SGMII, address 24:a4:3c:06:a2:74 ukphy2 at cnmac2 phy 6: Generic IEEE 802.3u media interface, rev. 3: OUI 0x180361, model 0x0004 cnmac3 at cn30xxgmx0: SGMII, address 24:a4:3c:06:a2:75 ukphy3 at cnmac3 phy 7: Generic IEEE 802.3u media interface, rev. 3: OUI 0x180361, model 0x0004 cn30xxgmx1 at iobus0 base 0x1180010000000 cnmac4 at cn30xxgmx1: SGMII, address 24:a4:3c:06:a2:76 ukphy4 at cnmac4 phy 0: Generic IEEE 802.3u media interface, rev. 3: OUI 0x180361, model 0x0004 cnmac5 at cn30xxgmx1: SGMII, address 24:a4:3c:06:a2:77 ukphy5 at cnmac5 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x180361, model 0x0004 cnmac6 at cn30xxgmx1: SGMII, address 24:a4:3c:06:a2:78 ukphy6 at cnmac6 phy 2: Generic IEEE 802.3u media interface, rev. 3: OUI 0x180361, model 0x0004 cnmac7 at cn30xxgmx1: SGMII, address 24:a4:3c:06:a2:79 ukphy7 at cnmac7 phy 3: Generic IEEE 802.3u media interface, rev. 3: OUI 0x180361, model 0x0004 simplebus0 at iobus0: "soc" octmmc0 at simplebus0 sdmmc0 at octmmc0: 8-bit, mmc high-speed uartbus0 at mainbus0 com0 at uartbus0 base 0x1180000000800 irq 34: ns16550a, 64 byte fifo com0: console com1 at uartbus0 base 0x1180000000c00 irq 35: ns16550a, 64 byte fifo /dev/ksyms: Symbol table not valid. ural0 at uhub0 port 1 configuration 1 interface 0 "Cisco-Linksys Wireless-G USB Network Adapter" rev 2.00/0.04 addr 2 ural0: MAC/BBP RT2571 (rev 0x05), RF RT2526, address 00:14:bf:75:9a:45 scsibus0 at sdmmc0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: <Sandisk, SEM04G, 0000> SCSI2 0/direct removable sd0: 3776MB, 512 bytes/sector, 7733248 sectors vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets boot device: sd0 root on sd0a (5e15570835adc5f6.a) swap on sd0b dump on sd0b