Just to clarify, I talked about X11. Restarting X11 makes my external monitor connected to the docking station be available.
But I'm surprised, IIRC I could use the external monitor without restarting X11 just after plugging laptop to the docking station. j. On Wed, Oct 04, 2017 at 02:37:29AM -0400, Jiri B wrote: > Hi, > > I have Lenovo T440s and Lenovo docking station with an external monitor. > > If I have running OpenBSD without docking station and then I plug it to > it, I can't see the external monitor. > > I see only these in dmesg after plugging laptop into it: > > uhub2 at uhub0 port 12 configuration 1 interface 0 "LENOVO Lenovo ThinkPad > Dock" rev 3.00/50.41 addr 3 > uhub3 at uhub0 port 3 configuration 1 interface 0 "LENOVO Lenovo ThinkPad > Dock" rev 2.10/50.40 addr 4 > uhub4 at uhub3 port 4 configuration 1 interface 0 "Lenovo Lenovo ThinkPad > Dock" rev 2.00/0.01 addr 8 > > Any idea what's wrong? IIRC it used to work in the past. > > Jiri > > $ xrandr > Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 > eDP-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) > 309mm x 175mm > 1920x1080 60.01*+ > 1400x1050 59.98 > 1280x1024 60.02 > 1280x960 60.00 > 1024x768 60.04 60.00 > 960x720 60.00 > 928x696 60.05 > 896x672 60.01 > 800x600 60.00 60.32 56.25 > 700x525 59.98 > 640x512 60.02 > 640x480 60.00 59.94 > 512x384 60.00 > 400x300 60.32 56.34 > 320x240 60.05 > DP-1 disconnected (normal left inverted right x axis y axis) > HDMI-1 disconnected (normal left inverted right x axis y axis) > DP-2 disconnected (normal left inverted right x axis y axis) > HDMI-2 disconnected (normal left inverted right x axis y axis) > > OpenBSD 6.2 (GENERIC.MP) #115: Wed Sep 27 10:45:53 MDT 2017 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 12540866560 (11959MB) > avail mem = 12153778176 (11590MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdcd3d000 (62 entries) > bios0: vendor LENOVO version "GJET79WW (2.29 )" date 09/03/2014 > bios0: LENOVO 20ARS19C0B > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP DBGP ECDT HPET APIC MCFG SSDT SSDT SSDT SSDT SSDT > SSDT SSDT SSDT PCCT SSDT TCPA UEFI POAT ASF! BATB FPDT UEFI DMAR > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3) EHC1(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpiec0 at acpi0 > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 2694.15 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: TSC frequency 2694154130 Hz > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 2693.77 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 1, core 0, package 0 > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 2693.77 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 1, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 2693.77 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 1, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PEG_) > acpiprt2 at acpi0: bus 2 (EXP1) > acpiprt3 at acpi0: bus 3 (EXP2) > acpiprt4 at acpi0: bus -1 (EXP3) > acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1 > acpipwrres1 at acpi0: NVP3, resource for PEG_ > acpipwrres2 at acpi0: NVP2, resource for PEG_ > acpitz0 at acpi0: critical temperature is 200 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > "LEN0071" at acpi0 not configured > "LEN0036" at acpi0 not configured > "SMO1200" at acpi0 not configured > acpibat0 at acpi0: BAT0 model "45N1773" serial 17123 type LION oem "SANYO" > acpibat1 at acpi0: BAT1 model "45N1738" serial 2803 type LION oem "LGC" > acpiac0 at acpi0: AC unit online > acpithinkpad0 at acpi0 > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "INT340F" at acpi0 not configured > acpivideo0 at acpi0: VID_ > acpivout at acpivideo0 not configured > acpivideo1 at acpi0: VID_ > cpu0: Enhanced SpeedStep 2694 MHz: speeds: 2701, 2700, 2600, 2400, 2300, > 2100, 2000, 1800, 1700, 1600, 1400, 1300, 1100, 1000, 800, 756 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b > drm0 at inteldrm0 > inteldrm0: msi > inteldrm0: 1920x1080, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi > azalia0: No codecs found > xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 > addr 1 > "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x04: msi, address > 28:d2:44:df:a1:87 > azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi > azalia1: codecs: Realtek ALC292 > audio0 at azalia1 > ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi > pci1 at ppb0 bus 2 > rtsx0 at pci1 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi > sdmmc0 at rtsx0: 4-bit > ppb1 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xe4: msi > pci2 at ppb1 bus 3 > iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7260" rev 0x83, msi > ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04 > ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3 > ahci0: port 0: 6.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7TE256, EXT0> SCSI3 0/direct > fixed naa.5002538844584d30 > sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin > ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2 int > 18 > iic0 at ichiic0 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > wsmouse1 at pms0 mux 0 > pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT > uhidev0 at uhub0 port 1 configuration 1 interface 0 "Microsoft Microsoft\M-. > 2.4GHz Transceiver v9.0" rev 2.00/7.97 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub0 port 1 configuration 1 interface 1 "Microsoft Microsoft\M-. > 2.4GHz Transceiver v9.0" rev 2.00/7.97 addr 2 > uhidev1: iclass 3/1, 26 report ids > uhid0 at uhidev1 reportid 18: input=0, output=0, feature=1 > uhid1 at uhidev1 reportid 23: input=0, output=0, feature=1 > ums0 at uhidev1 reportid 26: 5 buttons, Z and W dir > wsmouse2 at ums0 mux 0 > uhidev2 at uhub0 port 1 configuration 1 interface 2 "Microsoft Microsoft\M-. > 2.4GHz Transceiver v9.0" rev 2.00/7.97 addr 2 > uhidev2: iclass 3/0, 39 report ids > uhid2 at uhidev2 reportid 3: input=1, output=0, feature=0 > uhid3 at uhidev2 reportid 7: input=7, output=0, feature=0 > uhid4 at uhidev2 reportid 32: input=0, output=0, feature=18 > uhid5 at uhidev2 reportid 33: input=2, output=0, feature=0 > uhid6 at uhidev2 reportid 34: input=0, output=0, feature=26 > uhid7 at uhidev2 reportid 35: input=0, output=0, feature=26 > uhid8 at uhidev2 reportid 36: input=0, output=0, feature=31 > uhid9 at uhidev2 reportid 37: input=0, output=0, feature=31 > uhid10 at uhidev2 reportid 38: input=0, output=0, feature=31 > uhid11 at uhidev2 reportid 39: input=31, output=0, feature=0 > ugen0 at uhub0 port 6 "Validity Sensors VFS5011 Fingerprint Reader" rev > 1.10/0.78 addr 3 > ugen1 at uhub0 port 7 "Intel product 0x07dc" rev 2.00/0.01 addr 4 > uvideo0 at uhub0 port 8 configuration 1 interface 0 "J30E9S6RZ Integrated > Camera" rev 2.00/10.04 addr 5 > video0 at uvideo0 > uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.04 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed > sd1: 89999MB, 512 bytes/sector, 184319472 sectors > root on sd1a (a55d8c4b62cc0bec.a) swap on sd1b dump on sd1b > iwm0: hw rev 0x140, fw ver 16.242414.0, address e8:b1:fc:95:ee:df > wskbd1: disconnecting from wsdisplay0 > wskbd1 detached > ukbd0 detached > uhidev0 detached > uhid0 detached > uhid1 detached > wsmouse2 detached > ums0 detached > uhidev1 detached > uhid2 detached > uhid3 detached > uhid4 detached > uhid5 detached > uhid6 detached > uhid7 detached > uhid8 detached > uhid9 detached > uhid10 detached > uhid11 detached > uhidev2 detached > ugen0 detached > ugen1 detached > video0 detached > uvideo0 detached > uhub0 detached > uhub2 detached > uhub1 detached > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 > addr 1 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > uhidev0 at uhub0 port 1 configuration 1 interface 0 "Microsoft Microsoft\M-. > 2.4GHz Transceiver v9.0" rev 2.00/7.97 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > error: [drm:pid25632:intel_dp_link_training_clock_recovery] *ERROR* failed to > enable link training > error: [drm:pid25632:intel_dp_link_training_channel_equalization] *ERROR* > failed to start channel equalization > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub0 port 1 configuration 1 interface 1 "Microsoft Microsoft\M-. > 2.4GHz Transceiver v9.0" rev 2.00/7.97 addr 2 > uhidev1: iclass 3/1, 26 report ids > uhid0 at uhidev1 reportid 18: input=0, output=0, feature=1 > uhid1 at uhidev1 reportid 23: input=0, output=0, feature=1 > ums0 at uhidev1 reportid 26: 5 buttons, Z and W dir > wsmouse2 at ums0 mux 0 > uhidev2 at uhub0 port 1 configuration 1 interface 2 "Microsoft Microsoft\M-. > 2.4GHz Transceiver v9.0" rev 2.00/7.97 addr 2 > uhidev2: iclass 3/0, 39 report ids > uhid2 at uhidev2 reportid 3: input=1, output=0, feature=0 > uhid3 at uhidev2 reportid 7: input=7, output=0, feature=0 > uhid4 at uhidev2 reportid 32: input=0, output=0, feature=18 > uhid5 at uhidev2 reportid 33: input=2, output=0, feature=0 > uhid6 at uhidev2 reportid 34: input=0, output=0, feature=26 > uhid7 at uhidev2 reportid 35: input=0, output=0, feature=26 > uhid8 at uhidev2 reportid 36: input=0, output=0, feature=31 > uhid9 at uhidev2 reportid 37: input=0, output=0, feature=31 > uhid10 at uhidev2 reportid 38: input=0, output=0, feature=31 > uhid11 at uhidev2 reportid 39: input=31, output=0, feature=0 > error: [drm:pid17769:intel_dp_link_training_clock_recovery] *ERROR* failed to > enable link training > error: [drm:pid17769:intel_dp_link_training_channel_equalization] *ERROR* > failed to start channel equalization > uhub2 at uhub0 port 3 configuration 1 interface 0 "LENOVO Lenovo ThinkPad > Dock" rev 2.10/50.40 addr 3 > uhub3 at uhub2 port 4 configuration 1 interface 0 "Lenovo Lenovo ThinkPad > Dock" rev 2.00/0.01 addr 4 > ugen0 at uhub0 port 6 "Validity Sensors VFS5011 Fingerprint Reader" rev > 1.10/0.78 addr 5 > ugen1 at uhub0 port 7 "Intel product 0x07dc" rev 2.00/0.01 addr 6 > uvideo0 at uhub0 port 8 configuration 1 interface 0 "J30E9S6RZ Integrated > Camera" rev 2.00/10.04 addr 7 > video0 at uvideo0 > uhub4 at uhub0 port 12 configuration 1 interface 0 "LENOVO Lenovo ThinkPad > Dock" rev 3.00/50.41 addr 8 > uhub5 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.04 addr 2 > uhub3 detached > uhub2 detached > uhub4 detached > uhub2 at uhub0 port 12 configuration 1 interface 0 "LENOVO Lenovo ThinkPad > Dock" rev 3.00/50.41 addr 3 > uhub3 at uhub0 port 3 configuration 1 interface 0 "LENOVO Lenovo ThinkPad > Dock" rev 2.10/50.40 addr 4 > uhub4 at uhub3 port 4 configuration 1 interface 0 "Lenovo Lenovo ThinkPad > Dock" rev 2.00/0.01 addr 8 > uhub4 detached > uhub3 detached > uhub2 detached > uhub2 at uhub0 port 12 configuration 1 interface 0 "LENOVO Lenovo ThinkPad > Dock" rev 3.00/50.41 addr 3 > uhub3 at uhub0 port 3 configuration 1 interface 0 "LENOVO Lenovo ThinkPad > Dock" rev 2.10/50.40 addr 4 > uhub4 at uhub3 port 4 configuration 1 interface 0 "Lenovo Lenovo ThinkPad > Dock" rev 2.00/0.01 addr 8 > >
