A side note, you should turn on AHCI in your BIOS, not 'compatible' mode
pciide0: using apic 2 int 19 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD20EARX-00PASB0>
wd0: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
wd1 at pciide0 channel 0 drive 1: <Verbatim SATA-III SSD>
wd1: 16-sector PIO, LBA48, 244198MB, 500118192 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd2 at pciide0 channel 1 drive 1: <WDC WD20EARX-00PASB0>
wd2: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 6
Roar Waagsb?? [kowalczyk13...@gmail.com] wrote:
> After a little tip I send this mail again without pastebin links.
>
> Hi.
>
> Architecture is: amd64
>
> dmesg:
>
> emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
> azalia0: codecs: Realtek/0x0887, Intel/0x2806, using Realtek/0x0887
> audio0 at azalia0
> ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: msi
> pci3 at ppb2 bus 3
> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x09: RTL8168F/8111F
> (0x4800), msi, address 60:a4:4c:ad:8a:41
> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
> ppb3 at pci0 dev 28 function 5 "Intel 82801BA Hub-to-PCI" rev 0xc4: msi
> pci4 at ppb3 bus 4
> ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x03
> pci5 at ppb4 bus 5
> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel H77 LPC" rev 0x04
> pciide0 at pci0 dev 31 function 2 "Intel 7 Series SATA" rev 0x04: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 2 int 19 for native-PCI interrupt
> wd0 at pciide0 channel 0 drive 0: <WDC WD20EARX-00PASB0>
> wd0: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd1 at pciide0 channel 0 drive 1: <Verbatim SATA-III SSD>
> wd1: 16-sector PIO, LBA48, 244198MB, 500118192 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
> wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
> wd2 at pciide0 channel 1 drive 1: <WDC WD20EARX-00PASB0>
> wd2: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 6
> ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int
> 18
> iic0 at ichiic0
> iic0: addr 0x20 01=00 02=00 03=00 04=00 05=00 06=00 07=f6 08=f6 09=f6
> 0a=f6 0b=22 0c=22 0d=88 0e=88 0f=00 10=00 11=98 12=fc 13=04 14=00
> 15=00 16=1c 17=66 18=00 19=00 1a=00 1b=00 1c=00 1d=22 1e=88 1f=02
> 20=00 21=00 22=05 23=59 24=00 25=00 26=55 27=09 28=bf 29=00 2a=f5
> 2b=00 2c=01 2d=d0 2e=a0 2f=18 30=00 31=00 32=00 33=68 3e=db 46=00
> 47=03 48=04 49=13 b2=20 b3=83 words 00=ff00 01=0000 02=0000 03=0000
> 04=0000 05=0000 06=00f6 07=f6f6
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
> spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600
> spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
> spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600
> pciide1 at pci0 dev 31 function 5 "Intel 7 Series SATA" rev 0x04: DMA,
> channel 0 wired to native-PCI, channel 1 wired to native-PCI
> pciide1: using apic 2 int 19 for native-PCI interrupt
> wd3 at pciide1 channel 0 drive 0: <WDC WD20EARX-00PASB0>
> wd3: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd3(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT
> error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared
> pch fifo underrun on pch transcoder A
> error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH
> transcoder A FIFO underrun
> uhidev0 at uhub0 port 3 configuration 1 interface 0 "Chicony HP Elite
> USB Keyboard" rev 1.10/1.21 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub0 port 3 configuration 1 interface 1 "Chicony HP Elite
> USB Keyboard" rev 1.10/1.21 addr 2
> uhidev1: iclass 3/0, 2 report ids
> uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
> uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.00 addr 2
> uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.00 addr 2
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> root on wd1a (d2e56583ccf86119.a) swap on wd1b dump on wd1b
> WARNING: / was not properly unmounted
> syncing disks... done
> rebooti
> OpenBSD 6.1-current (GENERIC.MP) #21: Sun Aug 20 00:07:53 MDT 2017
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 16835751936 (16055MB)
> avail mem = 16318504960 <(631)%20850-4960> (15562MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe98f0 (107 entries)
> bios0: vendor American Megatrends Inc. version "1001" date 02/04/2013
> bios0: ASUSTeK COMPUTER INC. P8H77-V LE
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC FPDT MCFG HPET SSDT SSDT SSDT BGRT DMAR
> acpi0: wakeup devices UAR1(S4) P0P1(S4) PXSX(S4) RP01(S4) PXSX(S4)
> RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP07(S4)
> PXSX(S4) RP08(S4) PEGP(S4) PEG0(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.47 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: TSC frequency 3400467800 Hz
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 100MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.01 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.01 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.01 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 0, core 3, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P1)
> acpiprt2 at acpi0: bus 2 (RP01)
> acpiprt3 at acpi0: bus -1 (RP02)
> acpiprt4 at acpi0: bus -1 (RP03)
> acpiprt5 at acpi0: bus -1 (RP04)
> acpiprt6 at acpi0: bus -1 (RP07)
> acpiprt7 at acpi0: bus -1 (RP08)
> acpiprt8 at acpi0: bus 1 (PEG0)
> acpiprt9 at acpi0: bus -1 (PEG1)
> acpiprt10 at acpi0: bus -1 (PEG2)
> acpiprt11 at acpi0: bus -1 (PEG3)
> acpiprt12 at acpi0: bus 3 (RP05)
> acpiprt13 at acpi0: bus 4 (RP06)
> acpiprt14 at acpi0: bus 5 (PXSX)
> acpiec0 at acpi0: not present
> acpicpu0 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: FN00, resource for FAN0
> acpipwrres1 at acpi0: FN01, resource for FAN1
> acpipwrres2 at acpi0: FN02, resource for FAN2
> acpipwrres3 at acpi0: FN03, resource for FAN3
> acpipwrres4 at acpi0: FN04, resource for FAN4
> acpitz0 at acpi0: critical temperature is 106 degC
> acpitz1 at acpi0: critical temperature is 106 degC
> "INT3F0D" at acpi0 not configured
> acpibtn0 at acpi0: PWRB
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD02
> cpu0: Enhanced SpeedStep 3400 MHz: speeds: 3401, 3400, 3300, 3100,
> 3000, 2900, 2800, 2600, 2500, 2400, 2200, 2100, 2000, 1900, 1700, 1600
> MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> ppb0 at pci0 dev 1 function 0 "Intel Core 3G PCIE" rev 0x09: msi
> pci1 at ppb0 bus 1
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2500" rev 0x09
> drm0 at inteldrm0
> inteldrm0: msi
> inteldrm0: 1920x1080, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
> azalia0: codecs: Realtek/0x0887, Intel/0x2806, using Realtek/0x0887
> audio0 at azalia0
> ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: msi
> pci3 at ppb2 bus 3
> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x09: RTL8168F/8111F
> (0x4800), msi, address 60:a4:4c:ad:8a:41
> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
> ppb3 at pci0 dev 28 function 5 "Intel 82801BA Hub-to-PCI" rev 0xc4: msi
> pci4 at ppb3 bus 4
> ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x03
> pci5 at ppb4 bus 5
> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel H77 LPC" rev 0x04
> pciide0 at pci0 dev 31 function 2 "Intel 7 Series SATA" rev 0x04: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 2 int 19 for native-PCI interrupt
> wd0 at pciide0 channel 0 drive 0: <WDC WD20EARX-00PASB0>
> wd0: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd1 at pciide0 channel 0 drive 1: <Verbatim SATA-III SSD>
> wd1: 16-sector PIO, LBA48, 244198MB, 500118192 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
> wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
> wd2 at pciide0 channel 1 drive 1: <WDC WD20EARX-00PASB0>
> wd2: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 6
> ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int
> 18
> iic0 at ichiic0
> iic0: addr 0x20 01=00 02=00 03=00 04=00 05=00 06=00 07=f6 08=f6 09=f6
> 0a=f6 0b=22 0c=22 0d=88 0e=88 0f=00 10=00 11=98 12=fc 13=04 14=00
> 15=00 16=1c 17=66 18=00 19=00 1a=00 1b=00 1c=00 1d=22 1e=88 1f=02
> 20=00 21=00 22=05 23=57 24=00 25=00 26=55 27=09 28=bf 29=00 2a=f5
> 2b=00 2c=01 2d=d0 2e=a0 2f=18 30=00 31=00 32=00 33=68 3e=db 46=00
> 47=03 48=04 49=13 b2=20 b3=83 words 00=ff00 01=0000 02=0000 03=0000
> 04=0000 05=0000 06=00f6 07=f6f6
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
> spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600
> spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
> spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600
> pciide1 at pci0 dev 31 function 5 "Intel 7 Series SATA" rev 0x04: DMA,
> channel 0 wired to native-PCI, channel 1 wired to native-PCI
> pciide1: using apic 2 int 19 for native-PCI interrupt
> wd3 at pciide1 channel 0 drive 0: <WDC WD20EARX-00PASB0>
> wd3: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd3(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT
> error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared
> pch fifo underrun on pch transcoder A
> error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH
> transcoder A FIFO underrun
> uhidev0 at uhub0 port 3 configuration 1 interface 0 "Chicony HP Elite
> USB Keyboard" rev 1.10/1.21 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub0 port 3 configuration 1 interface 1 "Chicony HP Elite
> USB Keyboard" rev 1.10/1.21 addr 2
> uhidev1: iclass 3/0, 2 report ids
> uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
> uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.00 addr 2
> uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.00 addr 2
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> root on wd1a (d2e56583ccf86119.a) swap on wd1b dump on wd1b
> syncing disks... done
> rebooti
> OpenBSD 6.2-current (RAMDISK_CD) #137: Mon Oct 9 23:07:20 MDT 2017
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> real mem = 16835751936 (16055MB)
> avail mem = 16321761280 (15565MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe98f0 (107 entries)
> bios0: vendor American Megatrends Inc. version "1001" date 02/04/2013
> bios0: ASUSTeK COMPUTER INC. P8H77-V LE
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP APIC FPDT MCFG HPET SSDT SSDT SSDT BGRT DMAR
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.53 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: apic clock running at 100MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P1)
> acpiprt2 at acpi0: bus 2 (RP01)
> acpiprt3 at acpi0: bus -1 (RP02)
> acpiprt4 at acpi0: bus -1 (RP03)
> acpiprt5 at acpi0: bus -1 (RP04)
> acpiprt6 at acpi0: bus -1 (RP07)
> acpiprt7 at acpi0: bus -1 (RP08)
> acpiprt8 at acpi0: bus 1 (PEG0)
> acpiprt9 at acpi0: bus -1 (PEG1)
> acpiprt10 at acpi0: bus -1 (PEG2)
> acpiprt11 at acpi0: bus -1 (PEG3)
> acpiprt12 at acpi0: bus 3 (RP05)
> acpiprt13 at acpi0: bus 4 (RP06)
> acpiprt14 at acpi0: bus 5 (PXSX)
> acpiec0 at acpi0: not present
> acpicpu at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpitz at acpi0 not configured
> acpitz at acpi0 not configured
> "INT3F0D" at acpi0 not configured
> "PNP0C0C" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> ppb0 at pci0 dev 1 function 0 "Intel Core 3G PCIE" rev 0x09: msi
> pci1 at ppb0 bus 1
> vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2500" rev 0x09
> wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
> xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> "Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
> ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: msi
> pci3 at ppb2 bus 3
> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x09: RTL8168F/8111F
> (0x4800), msi, address 60:a4:4c:ad:8a:41
> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
> ppb3 at pci0 dev 28 function 5 "Intel 82801BA Hub-to-PCI" rev 0xc4: msi
> pci4 at ppb3 bus 4
> ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x03
> pci5 at ppb4 bus 5
> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> "Intel H77 LPC" rev 0x04 at pci0 dev 31 function 0 not configured
> pciide0 at pci0 dev 31 function 2 "Intel 7 Series SATA" rev 0x04: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 2 int 19 for native-PCI interrupt
> wd0 at pciide0 channel 0 drive 0: <WDC WD20EARX-00PASB0>
> wd0: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd1 at pciide0 channel 0 drive 1: <Verbatim SATA-III SSD>
> wd1: 16-sector PIO, LBA48, 244198MB, 500118192 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
> wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
> wd2 at pciide0 channel 1 drive 1: <WDC WD20EARX-00PASB0>
> wd2: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 6
> "Intel 7 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
> pciide1 at pci0 dev 31 function 5 "Intel 7 Series SATA" rev 0x04: DMA,
> channel 0 wired to native-PCI, channel 1 wired to native-PCI
> pciide1: using apic 2 int 19 for native-PCI interrupt
> wd3 at pciide1 channel 0 drive 0: <WDC WD20EARX-00PASB0>
> wd3: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd3(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
> isa0 at mainbus0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay1
> uhidev0 at uhub0 port 3 configuration 1 interface 0 "Chicony HP Elite
> USB Keyboard" rev 1.10/1.21 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay1
> uhidev1 at uhub0 port 3 configuration 1 interface 1 "Chicony HP Elite
> USB Keyboard" rev 1.10/1.21 addr 2
> uhidev1: iclass 3/0, 2 report ids
> uhid at uhidev1 reportid 1 not configured
> uhid at uhidev1 reportid 2 not configured
> uhub3 at uhub1 port 1 configuration 1 interface 0 "vendor 0x8087
> product 0x0024" rev 2.00/0.00 addr 2
> uhub4 at uhub2 port 1 configuration 1 interface 0 "vendor 0x8087
> product 0x0024" rev 2.00/0.00 addr 2
> softraid0 at root
> scsibus0 at softraid0: 256 targets
> root on rd0a swap on rd0b dump on rd0b
> syncing disks...
> OpenBSD 6.2-current (GENERIC.MP) #139: Mon Oct 9 23:03:03 MDT 2017
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 16835751936 (16055MB)
> avail mem = 16318648320 <(631)%20864-8320> (15562MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe98f0 (107 entries)
> bios0: vendor American Megatrends Inc. version "1001" date 02/04/2013
> bios0: ASUSTeK COMPUTER INC. P8H77-V LE
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC FPDT MCFG HPET SSDT SSDT SSDT BGRT DMAR
> acpi0: wakeup devices UAR1(S4) P0P1(S4) PXSX(S4) RP01(S4) PXSX(S4)
> RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP07(S4)
> PXSX(S4) RP08(S4) PEGP(S4) PEG0(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.48 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu0: 256KB 64b/line 8-way L2 cache
> acpitimer0: recalibrated TSC frequency 3400008838 Hz
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 0, core 3, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpihpet0: recalibrated TSC frequency 3400020880 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P1)
> acpiprt2 at acpi0: bus 2 (RP01)
> acpiprt3 at acpi0: bus -1 (RP02)
> acpiprt4 at acpi0: bus -1 (RP03)
> acpiprt5 at acpi0: bus -1 (RP04)
> acpiprt6 at acpi0: bus -1 (RP07)
> acpiprt7 at acpi0: bus -1 (RP08)
> acpiprt8 at acpi0: bus 1 (PEG0)
> acpiprt9 at acpi0: bus -1 (PEG1)
> acpiprt10 at acpi0: bus -1 (PEG2)
> acpiprt11 at acpi0: bus -1 (PEG3)
> acpiprt12 at acpi0: bus 3 (RP05)
> acpiprt13 at acpi0: bus 4 (RP06)
> acpiprt14 at acpi0: bus 5 (PXSX)
> acpiec0 at acpi0: not present
> acpicpu0 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: FN00, resource for FAN0
> acpipwrres1 at acpi0: FN01, resource for FAN1
> acpipwrres2 at acpi0: FN02, resource for FAN2
> acpipwrres3 at acpi0: FN03, resource for FAN3
> acpipwrres4 at acpi0: FN04, resource for FAN4
> acpitz0 at acpi0: critical temperature is 106 degC
> acpitz1 at acpi0: critical temperature is 106 degC
> "INT3F0D" at acpi0 not configured
> acpibtn0 at acpi0: PWRB
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD02
> cpu0: Enhanced SpeedStep 3400 MHz: speeds: 3401, 3400, 3300, 3100,
> 3000, 2900, 2800, 2600, 2500, 2400, 2200, 2100, 2000, 1900, 1700, 1600
> MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> ppb0 at pci0 dev 1 function 0 "Intel Core 3G PCIE" rev 0x09: msi
> pci1 at ppb0 bus 1
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2500" rev 0x09
> drm0 at inteldrm0
> inteldrm0: msi
> inteldrm0: 1920x1080, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
> azalia0: codecs: Realtek/0x0887, Intel/0x2806, using Realtek/0x0887
> audio0 at azalia0
> ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: msi
> pci3 at ppb2 bus 3
> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x09: RTL8168F/8111F
> (0x4800), msi, address 60:a4:4c:ad:8a:41
> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
> ppb3 at pci0 dev 28 function 5 "Intel 82801BA Hub-to-PCI" rev 0xc4: msi
> pci4 at ppb3 bus 4
> ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x03
> pci5 at ppb4 bus 5
> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel H77 LPC" rev 0x04
> pciide0 at pci0 dev 31 function 2 "Intel 7 Series SATA" rev 0x04: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 2 int 19 for native-PCI interrupt
> wd0 at pciide0 channel 0 drive 0: <WDC WD20EARX-00PASB0>
> wd0: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd1 at pciide0 channel 0 drive 1: <Verbatim SATA-III SSD>
> wd1: 16-sector PIO, LBA48, 244198MB, 500118192 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
> wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
> wd2 at pciide0 channel 1 drive 1: <WDC WD20EARX-00PASB0>
> wd2: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 6
> ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int
> 18
> iic0 at ichiic0
> iic0: addr 0x20 01=00 02=00 03=00 04=00 05=00 06=00 07=f6 08=f6 09=f6
> 0a=f6 0b=22 0c=22 0d=88 0e=88 0f=00 10=00 11=98 12=fc 13=04 14=00
> 15=00 16=1d 17=66 18=00 19=00 1a=00 1b=00 1c=00 1d=22 1e=88 1f=02
> 20=00 21=00 22=04 23=58 24=00 25=00 26=55 27=09 28=bf 29=00 2a=f5
> 2b=00 2c=01 2d=d0 2e=a0 2f=18 30=00 31=00 32=00 33=68 3e=db 46=00
> 47=03 48=04 49=13 b2=20 b3=83 words 00=ff00 01=0000 02=0000 03=0000
> 04=0000 05=0000 06=00f6 07=f6f6
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
> spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600
> spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
> spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600
> pciide1 at pci0 dev 31 function 5 "Intel 7 Series SATA" rev 0x04: DMA,
> channel 0 wired to native-PCI, channel 1 wired to native-PCI
> pciide1: using apic 2 int 19 for native-PCI interrupt
> wd3 at pciide1 channel 0 drive 0: <WDC WD20EARX-00PASB0>
> wd3: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd3(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT
> error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared
> pch fifo underrun on pch transcoder A
> error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH
> transcoder A FIFO underrun
> uhidev0 at uhub0 port 3 configuration 1 interface 0 "Chicony HP Elite
> USB Keyboard" rev 1.10/1.21 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub0 port 3 configuration 1 interface 1 "Chicony HP Elite
> USB Keyboard" rev 1.10/1.21 addr 2
> uhidev1: iclass 3/0, 2 report ids
> uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
> uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.00 addr 2
> uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.00 addr 2
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> root on wd1a (d2e56583ccf86119.a) swap on wd1b dump on wd1b
> syncing disks... done
> reboot
> OpenBSD 6.2-current (GENERIC.MP) #139: Mon Oct 9 23:03:03 MDT 2017
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 16835751936 (16055MB)
> avail mem = 16318648320 <(631)%20864-8320> (15562MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe98f0 (107 entries)
> bios0: vendor American Megatrends Inc. version "1001" date 02/04/2013
> bios0: ASUSTeK COMPUTER INC. P8H77-V LE
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC FPDT MCFG HPET SSDT SSDT SSDT BGRT DMAR
> acpi0: wakeup devices UAR1(S4) P0P1(S4) PXSX(S4) RP01(S4) PXSX(S4)
> RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP07(S4)
> PXSX(S4) RP08(S4) PEGP(S4) PEG0(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.41 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu0: 256KB 64b/line 8-way L2 cache
> acpitimer0: recalibrated TSC frequency 3400004199 Hz
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 100MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.01 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.01 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.01 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 0, core 3, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpihpet0: recalibrated TSC frequency 3400027400 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P1)
> acpiprt2 at acpi0: bus 2 (RP01)
> acpiprt3 at acpi0: bus -1 (RP02)
> acpiprt4 at acpi0: bus -1 (RP03)
> acpiprt5 at acpi0: bus -1 (RP04)
> acpiprt6 at acpi0: bus -1 (RP07)
> acpiprt7 at acpi0: bus -1 (RP08)
> acpiprt8 at acpi0: bus 1 (PEG0)
> acpiprt9 at acpi0: bus -1 (PEG1)
> acpiprt10 at acpi0: bus -1 (PEG2)
> acpiprt11 at acpi0: bus -1 (PEG3)
> acpiprt12 at acpi0: bus 3 (RP05)
> acpiprt13 at acpi0: bus 4 (RP06)
> acpiprt14 at acpi0: bus 5 (PXSX)
> acpiec0 at acpi0: not present
> acpicpu0 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: FN00, resource for FAN0
> acpipwrres1 at acpi0: FN01, resource for FAN1
> acpipwrres2 at acpi0: FN02, resource for FAN2
> acpipwrres3 at acpi0: FN03, resource for FAN3
> acpipwrres4 at acpi0: FN04, resource for FAN4
> acpitz0 at acpi0: critical temperature is 106 degC
> acpitz1 at acpi0: critical temperature is 106 degC
> "INT3F0D" at acpi0 not configured
> acpibtn0 at acpi0: PWRB
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD02
> cpu0: Enhanced SpeedStep 3400 MHz: speeds: 3401, 3400, 3300, 3100,
> 3000, 2900, 2800, 2600, 2500, 2400, 2200, 2100, 2000, 1900, 1700, 1600
> MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> ppb0 at pci0 dev 1 function 0 "Intel Core 3G PCIE" rev 0x09: msi
> pci1 at ppb0 bus 1
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2500" rev 0x09
> drm0 at inteldrm0
> inteldrm0: msi
> inteldrm0: 1920x1080, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
> azalia0: codecs: Realtek/0x0887, Intel/0x2806, using Realtek/0x0887
> audio0 at azalia0
> ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: msi
> pci3 at ppb2 bus 3
> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x09: RTL8168F/8111F
> (0x4800), msi, address 60:a4:4c:ad:8a:41
> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
> ppb3 at pci0 dev 28 function 5 "Intel 82801BA Hub-to-PCI" rev 0xc4: msi
> pci4 at ppb3 bus 4
> ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x03
> pci5 at ppb4 bus 5
> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel H77 LPC" rev 0x04
> pciide0 at pci0 dev 31 function 2 "Intel 7 Series SATA" rev 0x04: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 2 int 19 for native-PCI interrupt
> wd0 at pciide0 channel 0 drive 0: <WDC WD20EARX-00PASB0>
> wd0: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd1 at pciide0 channel 0 drive 1: <Verbatim SATA-III SSD>
> wd1: 16-sector PIO, LBA48, 244198MB, 500118192 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
> wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
> wd2 at pciide0 channel 1 drive 1: <WDC WD20EARX-00PASB0>
> wd2: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 6
> ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int
> 18
> iic0 at ichiic0
> iic0: addr 0x20 01=00 02=00 03=00 04=00 05=00 06=00 07=f6 08=f6 09=f6
> 0a=f6 0b=22 0c=22 0d=88 0e=88 0f=00 10=00 11=98 12=fc 13=04 14=00
> 15=00 16=1c 17=65 18=00 19=00 1a=00 1b=00 1c=00 1d=22 1e=88 1f=02
> 20=00 21=00 22=03 23=57 24=00 25=00 26=55 27=09 28=bf 29=00 2a=f5
> 2b=00 2c=01 2d=d0 2e=a0 2f=18 30=00 31=00 32=00 33=68 3e=db 46=00
> 47=03 48=04 49=13 b2=20 b3=83 words 00=ff00 01=0000 02=0000 03=0000
> 04=0000 05=0000 06=00f6 07=f6f6
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
> spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600
> spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
> spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600
> pciide1 at pci0 dev 31 function 5 "Intel 7 Series SATA" rev 0x04: DMA,
> channel 0 wired to native-PCI, channel 1 wired to native-PCI
> pciide1: using apic 2 int 19 for native-PCI interrupt
> wd3 at pciide1 channel 0 drive 0: <WDC WD20EARX-00PASB0>
> wd3: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd3(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT
> error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared
> pch fifo underrun on pch transcoder A
> error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH
> transcoder A FIFO underrun
> uhidev0 at uhub0 port 3 configuration 1 interface 0 "Chicony HP Elite
> USB Keyboard" rev 1.10/1.21 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub0 port 3 configuration 1 interface 1 "Chicony HP Elite
> USB Keyboard" rev 1.10/1.21 addr 2
> uhidev1: iclass 3/0, 2 report ids
> uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
> uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.00 addr 2
> uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.00 addr 2
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> root on wd1a (d2e56583ccf86119.a) swap on wd1b dump on wd1b
> syncing disks... done
> reboot
> OpenBSD 6.2-current (RAMDISK_CD) #138: Tue Oct 10 12:34:02 MDT 2017
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> real mem = 16835751936 (16055MB)
> avail mem = 16321761280 (15565MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe98f0 (107 entries)
> bios0: vendor American Megatrends Inc. version "1001" date 02/04/2013
> bios0: ASUSTeK COMPUTER INC. P8H77-V LE
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP APIC FPDT MCFG HPET SSDT SSDT SSDT BGRT DMAR
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.44 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: apic clock running at 100MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P1)
> acpiprt2 at acpi0: bus 2 (RP01)
> acpiprt3 at acpi0: bus -1 (RP02)
> acpiprt4 at acpi0: bus -1 (RP03)
> acpiprt5 at acpi0: bus -1 (RP04)
> acpiprt6 at acpi0: bus -1 (RP07)
> acpiprt7 at acpi0: bus -1 (RP08)
> acpiprt8 at acpi0: bus 1 (PEG0)
> acpiprt9 at acpi0: bus -1 (PEG1)
> acpiprt10 at acpi0: bus -1 (PEG2)
> acpiprt11 at acpi0: bus -1 (PEG3)
> acpiprt12 at acpi0: bus 3 (RP05)
> acpiprt13 at acpi0: bus 4 (RP06)
> acpiprt14 at acpi0: bus 5 (PXSX)
> acpiec0 at acpi0: not present
> acpicpu at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpitz at acpi0 not configured
> acpitz at acpi0 not configured
> "INT3F0D" at acpi0 not configured
> "PNP0C0C" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> ppb0 at pci0 dev 1 function 0 "Intel Core 3G PCIE" rev 0x09: msi
> pci1 at ppb0 bus 1
> vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2500" rev 0x09
> wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
> xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> "Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
> ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: msi
> pci3 at ppb2 bus 3
> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x09: RTL8168F/8111F
> (0x4800), msi, address 60:a4:4c:ad:8a:41
> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
> ppb3 at pci0 dev 28 function 5 "Intel 82801BA Hub-to-PCI" rev 0xc4: msi
> pci4 at ppb3 bus 4
> ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x03
> pci5 at ppb4 bus 5
> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> "Intel H77 LPC" rev 0x04 at pci0 dev 31 function 0 not configured
> pciide0 at pci0 dev 31 function 2 "Intel 7 Series SATA" rev 0x04: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 2 int 19 for native-PCI interrupt
> wd0 at pciide0 channel 0 drive 0: <WDC WD20EARX-00PASB0>
> wd0: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd1 at pciide0 channel 0 drive 1: <Verbatim SATA-III SSD>
> wd1: 16-sector PIO, LBA48, 244198MB, 500118192 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
> wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
> wd2 at pciide0 channel 1 drive 1: <WDC WD20EARX-00PASB0>
> wd2: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 6
> "Intel 7 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
> pciide1 at pci0 dev 31 function 5 "Intel 7 Series SATA" rev 0x04: DMA,
> channel 0 wired to native-PCI, channel 1 wired to native-PCI
> pciide1: using apic 2 int 19 for native-PCI interrupt
> wd3 at pciide1 channel 0 drive 0: <WDC WD20EARX-00PASB0>
> wd3: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd3(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
> isa0 at mainbus0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay1
> uhidev0 at uhub0 port 3 configuration 1 interface 0 "Chicony HP Elite
> USB Keyboard" rev 1.10/1.21 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay1
> uhidev1 at uhub0 port 3 configuration 1 interface 1 "Chicony HP Elite
> USB Keyboard" rev 1.10/1.21 addr 2
> uhidev1: iclass 3/0, 2 report ids
> uhid at uhidev1 reportid 1 not configured
> uhid at uhidev1 reportid 2 not configured
> uhub3 at uhub1 port 1 configuration 1 interface 0 "vendor 0x8087
> product 0x0024" rev 2.00/0.00 addr 2
> uhub4 at uhub2 port 1 configuration 1 interface 0 "vendor 0x8087
> product 0x0024" rev 2.00/0.00 addr 2
> softraid0 at root
> scsibus0 at softraid0: 256 targets
> root on rd0a swap on rd0b dump on rd0b
> syncing disks...
> OpenBSD 6.2-current (GENERIC.MP) #140: Tue Oct 10 12:29:44 MDT 2017
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 16835751936 (16055MB)
> avail mem = 16318656512 <(631)%20865-6512> (15562MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe98f0 (107 entries)
> bios0: vendor American Megatrends Inc. version "1001" date 02/04/2013
> bios0: ASUSTeK COMPUTER INC. P8H77-V LE
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC FPDT MCFG HPET SSDT SSDT SSDT BGRT DMAR
> acpi0: wakeup devices UAR1(S4) P0P1(S4) PXSX(S4) RP01(S4) PXSX(S4)
> RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP07(S4)
> PXSX(S4) RP08(S4) PEGP(S4) PEG0(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.45 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu0: 256KB 64b/line 8-way L2 cache
> acpitimer0: recalibrated TSC frequency 3400008118 Hz
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 0, core 3, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpihpet0: recalibrated TSC frequency 3400018000 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P1)
> acpiprt2 at acpi0: bus 2 (RP01)
> acpiprt3 at acpi0: bus -1 (RP02)
> acpiprt4 at acpi0: bus -1 (RP03)
> acpiprt5 at acpi0: bus -1 (RP04)
> acpiprt6 at acpi0: bus -1 (RP07)
> acpiprt7 at acpi0: bus -1 (RP08)
> acpiprt8 at acpi0: bus 1 (PEG0)
> acpiprt9 at acpi0: bus -1 (PEG1)
> acpiprt10 at acpi0: bus -1 (PEG2)
> acpiprt11 at acpi0: bus -1 (PEG3)
> acpiprt12 at acpi0: bus 3 (RP05)
> acpiprt13 at acpi0: bus 4 (RP06)
> acpiprt14 at acpi0: bus 5 (PXSX)
> acpiec0 at acpi0: not present
> acpicpu0 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: FN00, resource for FAN0
> acpipwrres1 at acpi0: FN01, resource for FAN1
> acpipwrres2 at acpi0: FN02, resource for FAN2
> acpipwrres3 at acpi0: FN03, resource for FAN3
> acpipwrres4 at acpi0: FN04, resource for FAN4
> acpitz0 at acpi0: critical temperature is 106 degC
> acpitz1 at acpi0: critical temperature is 106 degC
> "INT3F0D" at acpi0 not configured
> acpibtn0 at acpi0: PWRB
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD02
> cpu0: Enhanced SpeedStep 3400 MHz: speeds: 3401, 3400, 3300, 3100,
> 3000, 2900, 2800, 2600, 2500, 2400, 2200, 2100, 2000, 1900, 1700, 1600
> MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> ppb0 at pci0 dev 1 function 0 "Intel Core 3G PCIE" rev 0x09: msi
> pci1 at ppb0 bus 1
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2500" rev 0x09
> drm0 at inteldrm0
> inteldrm0: msi
> inteldrm0: 1920x1080, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
> azalia0: codecs: Realtek/0x0887, Intel/0x2806, using Realtek/0x0887
> audio0 at azalia0
> ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: msi
> pci3 at ppb2 bus 3
> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x09: RTL8168F/8111F
> (0x4800), msi, address 60:a4:4c:ad:8a:41
> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
> ppb3 at pci0 dev 28 function 5 "Intel 82801BA Hub-to-PCI" rev 0xc4: msi
> pci4 at ppb3 bus 4
> ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x03
> pci5 at ppb4 bus 5
> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel H77 LPC" rev 0x04
> pciide0 at pci0 dev 31 function 2 "Intel 7 Series SATA" rev 0x04: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 2 int 19 for native-PCI interrupt
> wd0 at pciide0 channel 0 drive 0: <WDC WD20EARX-00PASB0>
> wd0: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd1 at pciide0 channel 0 drive 1: <Verbatim SATA-III SSD>
> wd1: 16-sector PIO, LBA48, 244198MB, 500118192 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
> wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
> wd2 at pciide0 channel 1 drive 1: <WDC WD20EARX-00PASB0>
> wd2: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 6
> ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int
> 18
> iic0 at ichiic0
> iic0: addr 0x20 01=00 02=00 03=00 04=00 05=00 06=00 07=f6 08=f6 09=f6
> 0a=f6 0b=22 0c=22 0d=88 0e=88 0f=00 10=00 11=98 12=fc 13=04 14=00
> 15=00 16=1c 17=65 18=00 19=00 1a=00 1b=00 1c=00 1d=22 1e=88 1f=02
> 20=00 21=00 22=03 23=57 24=00 25=00 26=55 27=09 28=bf 29=00 2a=f5
> 2b=00 2c=01 2d=d0 2e=a0 2f=18 30=00 31=00 32=00 33=68 3e=db 46=00
> 47=03 48=04 49=13 b2=20 b3=83 words 00=ff00 01=0000 02=0000 03=0000
> 04=0000 05=0000 06=00f6 07=f6f6
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
> spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600
> spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
> spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600
> pciide1 at pci0 dev 31 function 5 "Intel 7 Series SATA" rev 0x04: DMA,
> channel 0 wired to native-PCI, channel 1 wired to native-PCI
> pciide1: using apic 2 int 19 for native-PCI interrupt
> wd3 at pciide1 channel 0 drive 0: <WDC WD20EARX-00PASB0>
> wd3: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd3(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT
> error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared
> pch fifo underrun on pch transcoder A
> error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH
> transcoder A FIFO underrun
> uhidev0 at uhub0 port 3 configuration 1 interface 0 "Chicony HP Elite
> USB Keyboard" rev 1.10/1.21 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub0 port 3 configuration 1 interface 1 "Chicony HP Elite
> USB Keyboard" rev 1.10/1.21 addr 2
> uhidev1: iclass 3/0, 2 report ids
> uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
> uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.00 addr 2
> uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.00 addr 2
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> root on wd1a (d2e56583ccf86119.a) swap on wd1b dump on wd1b
> syncing disks... done
> rebooting...
> OpenBSD 6.2-current (GENERIC.MP) #140: Tue Oct 10 12:29:44 MDT 2017
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 16835751936 (16055MB)
> avail mem = 16318644224 <(631)%20864-4224> (15562MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe98f0 (107 entries)
> bios0: vendor American Megatrends Inc. version "1001" date 02/04/2013
> bios0: ASUSTeK COMPUTER INC. P8H77-V LE
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC FPDT MCFG HPET SSDT SSDT SSDT BGRT DMAR
> acpi0: wakeup devices UAR1(S4) P0P1(S4) PXSX(S4) RP01(S4) PXSX(S4)
> RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP07(S4)
> PXSX(S4) RP08(S4) PEGP(S4) PEG0(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.47 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu0: 256KB 64b/line 8-way L2 cache
> acpitimer0: recalibrated TSC frequency 3400014278 Hz
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz, 3400.00 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 0, core 3, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpihpet0: recalibrated TSC frequency 3400021400 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P1)
> acpiprt2 at acpi0: bus 2 (RP01)
> acpiprt3 at acpi0: bus -1 (RP02)
> acpiprt4 at acpi0: bus -1 (RP03)
> acpiprt5 at acpi0: bus -1 (RP04)
> acpiprt6 at acpi0: bus -1 (RP07)
> acpiprt7 at acpi0: bus -1 (RP08)
> acpiprt8 at acpi0: bus 1 (PEG0)
> acpiprt9 at acpi0: bus -1 (PEG1)
> acpiprt10 at acpi0: bus -1 (PEG2)
> acpiprt11 at acpi0: bus -1 (PEG3)
> acpiprt12 at acpi0: bus 3 (RP05)
> acpiprt13 at acpi0: bus 4 (RP06)
> acpiprt14 at acpi0: bus 5 (PXSX)
> acpiec0 at acpi0: not present
> acpicpu0 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: FN00, resource for FAN0
> acpipwrres1 at acpi0: FN01, resource for FAN1
> acpipwrres2 at acpi0: FN02, resource for FAN2
> acpipwrres3 at acpi0: FN03, resource for FAN3
> acpipwrres4 at acpi0: FN04, resource for FAN4
> acpitz0 at acpi0: critical temperature is 106 degC
> acpitz1 at acpi0: critical temperature is 106 degC
> "INT3F0D" at acpi0 not configured
> acpibtn0 at acpi0: PWRB
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD02
> cpu0: Enhanced SpeedStep 3400 MHz: speeds: 3401, 3400, 3300, 3100,
> 3000, 2900, 2800, 2600, 2500, 2400, 2200, 2100, 2000, 1900, 1700, 1600
> MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> ppb0 at pci0 dev 1 function 0 "Intel Core 3G PCIE" rev 0x09: msi
> pci1 at ppb0 bus 1
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2500" rev 0x09
> drm0 at inteldrm0
> inteldrm0: msi
> inteldrm0: 1920x1080, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
> azalia0: codecs: Realtek/0x0887, Intel/0x2806, using Realtek/0x0887
> audio0 at azalia0
> ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: msi
> pci3 at ppb2 bus 3
> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x09: RTL8168F/8111F
> (0x4800), msi, address 60:a4:4c:ad:8a:41
> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
> ppb3 at pci0 dev 28 function 5 "Intel 82801BA Hub-to-PCI" rev 0xc4: msi
> pci4 at ppb3 bus 4
> ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x03
> pci5 at ppb4 bus 5
> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel H77 LPC" rev 0x04
> pciide0 at pci0 dev 31 function 2 "Intel 7 Series SATA" rev 0x04: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 2 int 19 for native-PCI interrupt
> wd0 at pciide0 channel 0 drive 0: <WDC WD20EARX-00PASB0>
> wd0: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd1 at pciide0 channel 0 drive 1: <Verbatim SATA-III SSD>
> wd1: 16-sector PIO, LBA48, 244198MB, 500118192 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
> wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
> wd2 at pciide0 channel 1 drive 1: <WDC WD20EARX-00PASB0>
> wd2: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 6
> ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int
> 18
> iic0 at ichiic0
> iic0: addr 0x20 01=00 02=00 03=00 04=00 05=00 06=00 07=f6 08=f6 09=f6
> 0a=f6 0b=22 0c=22 0d=88 0e=88 0f=00 10=00 11=98 12=fc 13=04 14=00
> 15=00 16=1c 17=65 18=00 19=00 1a=00 1b=00 1c=00 1d=22 1e=88 1f=02
> 20=00 21=00 22=03 23=56 24=00 25=00 26=55 27=09 28=bf 29=00 2a=f5
> 2b=00 2c=01 2d=d0 2e=a0 2f=18 30=00 31=00 32=00 33=68 3e=db 46=00
> 47=03 48=04 49=13 b2=20 b3=83 words 00=ff00 01=0000 02=0000 03=0000
> 04=0000 05=0000 06=00f6 07=f6f6
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
> spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600
> spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
> spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600
> pciide1 at pci0 dev 31 function 5 "Intel 7 Series SATA" rev 0x04: DMA,
> channel 0 wired to native-PCI, channel 1 wired to native-PCI
> pciide1: using apic 2 int 19 for native-PCI interrupt
> wd3 at pciide1 channel 0 drive 0: <WDC WD20EARX-00PASB0>
> wd3: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
> wd3(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT
> error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared
> pch fifo underrun on pch transcoder A
> error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH
> transcoder A FIFO underrun
> uhidev0 at uhub0 port 3 configuration 1 interface 0 "Chicony HP Elite
> USB Keyboard" rev 1.10/1.21 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub0 port 3 configuration 1 interface 1 "Chicony HP Elite
> USB Keyboard" rev 1.10/1.21 addr 2
> uhidev1: iclass 3/0, 2 report ids
> uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
> uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.00 addr 2
> uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.00 addr 2
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> root on wd1a (d2e56583ccf86119.a) swap on wd1b dump on wd1b
>
>
> My scripts for starting my vms:
> 1st vm:
> doas vmctl start "minecraft" -m 4G -n "uplink" -d
> /mnt/disk1/vmm/minecraft/disk.img -d /mnt/disk1/vmm/minecraft/disk2.img
> #doas vmctl start "minecraft" -c -b ~/upgrade/bsd.rd -m 4G -n "uplink" -d
> /mnt/disk1/vmm/minecraft/disk.img -d /mnt/disk1/vmm/minecraft/disk2.img
>
> 2nd vm:
> doas vmctl start "marianne" -m 2G -n "uplink" -d
> /mnt/disk1/vmm/marianne/disk.img
> #doas vmctl start "marianne" -c -b ~/upgrade/bsd.rd -m 2G -n "uplink" -d
> /mnt/disk1/vmm/marianne/disk.img
>
> Vm.conf:
> switch "uplink" {
> add re0
> }
>
>
> Hostname.bridge0:
>
> add re0
> add vether0
> up
> fwddelay 4
>
> !sleep 2
>
> !dhclient vether0
>
> ----
> I run openbsd as guest vms on both
>
> I have 2 vms.
>
> I started vmd with -dvvv now and it gave me this error a little while after
> starting my vm:
> vmd_dispatch_vmm: handling TERMINATE_EVENT for vm id 1
>
>
>
> 2017-10-10 21:11 GMT+02:00 Carlos Cardenas <cardena...@gmail.com>:
>
> > On 10/10/17 11:57, Roar Waagsb?? wrote:
> > > Hi.
> > >
> > > Sorry.
> > >
> > > Its my first report.
> > >
> > > Im not even sure its a bug or if its me doing something wrong.
> > >
> > > The logs arent saying much either, besides the one line I posted.
> > >
> > > Roar
> > >
> > > On Oct 10, 2017 5:21 PM, "Mike Larkin" <mlar...@azathoth.net> wrote:
> > >
> > >> On Tue, Oct 10, 2017 at 02:39:05PM +0200, Roar Waagsb?? wrote:
> > >>> Hi.
> > >>>
> > >>> I starting using openbsd a while back and I was told on
> > #openbsd@freenode
> > >>> that vmm was the way to go, and not use qemu.
> > >>>
> > >>> I want to use openbsd on my host machine.
> > >>>
> > >>> I setup two vms and it worked fine.
> > >>>
> > >>> After about a week I noticed that one of my vms was shutdown.
> > >>>
> > >>> I started it back up again and didnt give it much thought.
> > >>>
> > >>> After a few days my other vm was shut down.
> > >>>
> > >>> Then after a few days again both my vms was shutdown.
> > >>>
> > >>> Today I upgraded the host to a new -current snapshot (10/10/2017)
> > >>>
> > >>> And when I start my vm now, it says that it starts successfully, then
> > >> after
> > >>> a few seconds it is shutdown again.
> > >>>
> > >>> I started vmd with -d (tried -dv but it said that -v wasnt an options,
> > >> even
> > >>> though man vmd say so)
> > >>>
> > >>> And the only thing /var/log/daemon says was:
> > >>>
> > >>> vmd2: vm2 even trhead exited unexpectedly.
> > >>>
> > >>> Am I missing something?
> > >>>
> > >>> Or am I doing anything wrong?
> > >>>
> > >>> Regards Roar
> > >>
> > >> Your bug report is horrible.
> > >>
> > >> man sendbug
> > >>
> > >> -ml
> > >>
> >
> > Roar,
> >
> > Let's start with this:
> > * You said you are running -current (2017-10-10), which architecture
> > (amd64 or i386)? A dmesg would be good.
> > * What are your VM params (i.e. how did you start them)? Do you have a
> > vm.conf file you can share?
> > * What guest VMs are you running?
> > * How many vmd's are you running? (asking because of the "vmd2: ...."
> > line) There should be only one.
> >
> > If you are going to run vmd in the foreground, make sure no other vmd
> > instances are running.
> >
> > I don't understand your comment about '-v' since not only is it present in
> > the usage of vmd but also
> > in the man page (man vmd).
> >
> > los@rollo:% doas vmd -h
> > vmd: unknown option -- h
> > usage: vmd [-dnv] [-D macro=value] [-f file]
> >
> > Either way, run vmd in the foreground with '-dvvv' as in:
> > doas vmd -dvvv
> >
> > Once you're able to share all of that info then we can start the process
> > of troubleshooting.
> >
> > +--+
> > Carlos
> >
