On Thu, Jan 26, 2006 at 02:13:33PM +0100, Johan L wrote:
> Hi!
>
> We are trying to install OpenBSD 3.8 on a Fujitsu-Siemens PRIMERGY RX100
> S2 server.
> The install CD boots fine, but we get warnings about the Intel 6300ESB:
>
> >vendor "Intel", unknown product 0x257e (class system subclass
> miscellaneous, rev 0x02) at pci0 dev 6 function 0 not configured
> >"Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured
> >"Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured
> >"Intel 6300ESB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
>
> The hardware list sais that 6300ESB is suppored, is this a new revision
> or is there another problem lurking around here (see below for dmesg)?
there's absolutely no problem here.
>
> Thanks,
>
> Johan Linnir
>
>
> OpenBSD 3.8 (RAMDISK_CD) #794: Sat Sep 10 15:58:32 MDT 2005
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> cpu0: Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
> real mem = 2146459648 (2096152K)
> avail mem = 1953615872 (1907828K)
> using 4278 buffers containing 107425792 bytes (104908K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(90) BIOS, date 04/27/05, BIOS32 rev. 0 @ 0xfd5d6
> apm0 at bios0: Power Management spec V1.2
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xfd540/0xac0
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/288 (16 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #3 is the last bus
> WARNING: can't reserve area for I/O APIC.
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xdc000/0x4000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82875P Host" rev 0x02
> ppb0 at pci0 dev 3 function 0 "Intel 82875P PCI-CSA" rev 0x02
> pci1 at ppb0 bus 1
> em0 at pci1 dev 1 function 0 "Intel PRO/1000CT (82547GI)" rev 0x00: irq
> 7, address: 00:0a:e4:7f:68:66
> vendor "Intel", unknown product 0x257e (class system subclass
> miscellaneous, rev 0x02) at pci0 dev 6 function 0 not configured
> ppb1 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
> pci2 at ppb1 bus 2
> pciide0 at pci2 dev 4 function 0 "Promise PDC20319" rev 0x02: DMA
> pciide0: using irq 9 for native-PCI interrupt
> uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: irq 5
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 5300ESB USB" rev 0x02: irq 3
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> "Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured
> "Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured
> ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: irq 11
> usb2 at ehci0: USB revision 2.0
> uhub2 at usb2
> uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub2: 4 ports with 4 removable, self powered
> ppb2 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x0a
> pci3 at ppb2 bus 3
> vga1 at pci3 dev 5 function 0 "ATI Rage XL" rev 0x27
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> em1 at pci3 dev 6 function 0 "Intel PRO/1000MT (82541GI)" rev 0x00: irq
> 10, address: 00:0a:e4:7f:68:67
> ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02
> pciide1 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA,
> channel 0 configured to compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide1 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4244N, 1.00> SCSI0
> 5/cdrom removable
> cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide1: channel 1 ignored (disabled)
> "Intel 6300ESB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> npx0 at isa0 port 0xf0/16: using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask fb7d netmask fffd ttymask ffff
> rd0: fixed, 3800 blocks
> root on rd0a
> rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
--
Alexander Yurchenko
