On Mon, Feb 12, 2018 at 05:25:57PM +0000, Xianwen Chen wrote: > Dear Mike, > > >From the output of dmesg, I guess so. The BIOS is locked by IT > administrators. Is there some way that I can use OpenBSD while the > controller is set to RAID mode? > > Sincerely, > Xianwen >
not that I know of > On 2/12/18, Mike Larkin <mlar...@azathoth.net> wrote: > > On Mon, Feb 12, 2018 at 05:07:15PM +0000, Xianwen Chen wrote: > >> Dear OpenBSD users, > >> > >> I am not able to run OpenBSD 6.2 amd64 on a Dell Latitude E6330. The > >> installation was done by taking out the hard drive and hook it through > >> a USB reader to another machine. > >> > >> I boot the hard drive through Legacy Boot menu. The boot process stops > >> with > >> root device: > >> > >> It is possible to boot through bsd.rd. However, the hard drive is not > >> recognized there. > >> > >> Here is the dmesg from bsd.rd: > >> > >> OpenBSD 6.2 (RAMDISK_CD) #132: Tue Oct 3 21:26:51 MDT 2017 > >> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD > >> real mem = 17064423424 (16273MB) > >> avail mem = 16543502336 (15777MB) > >> mainbus0 at root > >> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xecad0 (98 entries) > >> bios0: vendor Dell Inc. version "A16" date 01/18/2016 > >> bios0: Dell Inc. Latitude E6330 > >> acpi0 at bios0: rev 2 > >> acpi0: tables DSDT FACP APIC FPDT TCPA MCFG HPET SSDT SSDT SSDT DMAR > >> ASF! SSDT SLIC BGRT > >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > >> cpu0 at mainbus0: apid 0 (boot processor) > >> cpu0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2891.03 MHz > >> cpu0: > >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT > >> cpu0: 256KB 64b/line 8-way L2 cache > >> cpu0: TSC frequency 2891029960 Hz > >> cpu0: apic clock running at 99MHz > >> cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > >> cpu at mainbus0: not configured > >> cpu at mainbus0: not configured > >> cpu at mainbus0: not configured > >> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > >> acpiprt0 at acpi0: bus 0 (PCI0) > >> acpiprt1 at acpi0: bus -1 (P0P1) > >> acpiprt2 at acpi0: bus 1 (RP01) > >> acpiprt3 at acpi0: bus 2 (RP02) > >> acpiprt4 at acpi0: bus -1 (RP05) > >> acpiprt5 at acpi0: bus 11 (RP06) > >> acpiprt6 at acpi0: bus -1 (RP07) > >> acpiprt7 at acpi0: bus -1 (RP08) > >> acpiprt8 at acpi0: bus -1 (PEG0) > >> acpiprt9 at acpi0: bus -1 (PEG1) > >> acpiprt10 at acpi0: bus -1 (PEG2) > >> acpiprt11 at acpi0: bus -1 (PEG3) > >> acpiprt12 at acpi0: bus 3 (RP03) > >> acpiprt13 at acpi0: bus 7 (RP04) > >> acpiec0 at acpi0 > >> acpicpu at acpi0 not configured > >> acpitz at acpi0 not configured > >> "INT3F0D" at acpi0 not configured > >> "DLLK0533" at acpi0 not configured > >> "DLL0533" at acpi0 not configured > >> "PNP0401" at acpi0 not configured > >> "SMO8810" at acpi0 not configured > >> "*pnp0c14" at acpi0 not configured > >> "PNP0C0D" at acpi0 not configured > >> "PNP0C0C" at acpi0 not configured > >> "PNP0C0E" at acpi0 not configured > >> "ACPI0003" at acpi0 not configured > >> "PNP0C0A" at acpi0 not configured > >> "PNP0C0A" at acpi0 not configured > >> "PNP0C0A" at acpi0 not configured > >> "DELLABCE" at acpi0 not configured > >> "PNP0C31" at acpi0 not configured > >> pci0 at mainbus0 bus 0 > >> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 > >> vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 > >> wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation) > >> xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi > >> usb0 at xhci0: USB revision 3.0 > >> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > >> 3.00/1.00 addr 1 > >> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > >> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > >> b8:ca:3a:d8:5f:2e > >> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int > >> 16 > >> usb1 at ehci0: USB revision 2.0 > >> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > >> 2.00/1.00 addr 1 > >> "Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not > >> configured > >> ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi > >> pci1 at ppb0 bus 1 > >> ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi > >> pci2 at ppb1 bus 2 > >> iwn0 at pci2 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev > >> 0x35: msi, MIMO 3T3R, MoW, address 3c:a9:f4:01:ed:24 > >> ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi > >> pci3 at ppb2 bus 3 > >> ppb3 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi > >> pci4 at ppb3 bus 7 > >> ppb4 at pci0 dev 28 function 5 "Intel 7 Series PCIE" rev 0xc4: msi > >> pci5 at ppb4 bus 11 > >> sdhc0 at pci5 dev 0 function 0 vendor "O2 Micro", unknown product > >> 0x8221 rev 0x05: apic 2 int 17 > >> sdhc0: SDHC 2.0, 50 MHz base clock > >> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma > >> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int > >> 21 > >> usb2 at ehci1: USB revision 2.0 > >> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev > >> 2.00/1.00 addr 1 > >> "Intel QM77 LPC" rev 0x04 at pci0 dev 31 function 0 not configured > >> pciide0 at pci0 dev 31 function 2 "Intel 82801HBM RAID" rev 0x04: DMA, > >> channel 0 wired to native-PCI, channel 1 wired to native-PCI > >> pciide0: using apic 2 int 19 for native-PCI interrupt > >> "Intel 7 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured > >> isa0 at mainbus0 > >> pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > >> pckbd0 at pckbc0 (kbd slot) > >> wskbd0 at pckbd0: console keyboard, using wsdisplay1 > >> uhub3 at uhub1 port 1 configuration 1 interface 0 "vendor 0x8087 > >> product 0x0024" rev 2.00/0.00 addr 2 > >> "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 3 at uhub3 port 4 not > >> configured > >> "001BFC3CF4E8-D117-091032 Laptop_Integrated_Webcam_E4HD" rev > >> 2.00/28.08 addr 4 at uhub3 port 5 not configured > >> uhub4 at uhub2 port 1 configuration 1 interface 0 "vendor 0x8087 > >> product 0x0024" rev 2.00/0.00 addr 2 > >> softraid0 at root > >> scsibus0 at softraid0: 256 targets > >> root on rd0a swap on rd0b dump on rd0b > >> umass0 at uhub0 port 1 configuration 1 interface 0 "Generic Mass > >> Storage" rev 2.00/1.06 addr 2 > >> umass0: using SCSI over Bulk-Only > >> scsibus1 at umass0: 2 targets, initiator 0 > >> sd0 at scsibus1 targ 1 lun 0: <Generic, Flash Disk, 8.07> SCSI2 > >> 0/direct removable > >> sd0: 1920MB, 512 bytes/sector, 3932160 sectors > >> > >> Sincerely, > >> Xianwen > >> > > > > Is your controller set in the BIOS to "RAID" mode instead of "AHCI" mode? >
