Hi,
audio is stuttering on media playback when run through sndiod. It's OK
without it.
Here is an example of audio/cmus attaching to play a mp3 file:
x250$ doas sndiod -ddd
snd0 pst=cfg.default: rec=0:1 play=0:1 vol=23170 dup
helper(helper|ini): created
worker(worker|ini): created
listen(/tmp/aucat/aucat0|ini): created
sock(sock|ini): created
helper: recv: cmd = 0, num = 0, mode = 3, fd = -1
helper: send: cmd = 3, num = 0, mode = 0, fd = 3
sock,rmsg,widl: AUTH message
sock,rmsg,widl: HELLO message
sock,rmsg,widl: hello from <cmus>, mode = 1, ver 7
sock,rmsg,widl: using snd0 pst=cfg.default, mode = 1
cmus0: overwritten slot 0
snd0 pst=cfg: device requested
worker: send: cmd = 0, num = 0, mode = 3, fd = -1
worker: recv: cmd = 3, num = 0, mode = 0, fd = 6
sio(rsnd/0|ini): created
snd0 pst=ini: 48000Hz, s16le, play 0:1, rec 0:1, 8 blocks of 960 frames
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: SETPAR message
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: playback channels 0:1 -> 0:1
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: 44100Hz sample rate, 882 frame blocks
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: 13230 frame buffer
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: GETPAR message
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: GETPAR message
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: START message
cmus0 vol=127,pst=ini,mmc=off: playing s16le -> s16le
cmus0 vol=127,pst=ini,mmc=off: allocated 13230/20286 fr buffers
cmus0 vol=127,pst=sta,mmc=off: 44100Hz, s16le, play 0:1, 15 blocks of 882 frames
cmus0 vol=127,pst=sta,mmc=off,rmsg,widl: building SETVOL message, vol = 127
snd0 pst=ini: device started
snd0 pst=run: started
cmus0 vol=127,pst=run,mmc=off: attached at -7056, delta = 0
cmap: nch = 2, ostart = 0, onext = 0, istart = 0, inext = 0
resamp: 882/960
cmus0 vol=127,pst=run,mmc=off: set weight: 23170/23170
snd0 pst=run: rec hw xrun, rused = 5760/7680
snd0 pst=run: play hw xrun, pused = 1920/7680
snd0 pst=run: rec hw xrun, rused = 4800/7680
snd0 pst=run: play hw xrun, pused = 2880/7680
snd0 pst=run: rec hw xrun, rused = 3840/7680
snd0 pst=run: play hw xrun, pused = 3840/7680
snd0 pst=run: rec hw xrun, rused = 2880/7680
snd0 pst=run: play hw xrun, pused = 4800/7680
snd0 pst=run: rec hw xrun, rused = 1920/7680
snd0 pst=run: play hw xrun, pused = 5760/7680
snd0 pst=run: rec hw xrun, rused = 960/7680
snd0 pst=run: play hw xrun, pused = 6720/7680
snd0 pst=run: rec hw xrun, rused = 5760/7680
snd0 pst=run: play hw xrun, pused = 1920/7680
snd0 pst=run: rec hw xrun, rused = 4800/7680
snd0 pst=run: play hw xrun, pused = 2880/7680
snd0 pst=run: rec hw xrun, rused = 3840/7680
snd0 pst=run: play hw xrun, pused = 3840/7680
snd0 pst=run: rec hw xrun, rused = 2880/7680
snd0 pst=run: play hw xrun, pused = 4800/7680
snd0 pst=run: rec hw xrun, rused = 1920/7680
snd0 pst=run: play hw xrun, pused = 5760/7680
snd0 pst=run: rec hw xrun, rused = 960/7680
snd0 pst=run: play hw xrun, pused = 6720/7680
snd0 pst=run: rec hw xrun, rused = 5760/7680
snd0 pst=run: play hw xrun, pused = 1920/7680
snd0 pst=run: rec hw xrun, rused = 4800/7680
snd0 pst=run: play hw xrun, pused = 2880/7680
snd0 pst=run: rec hw xrun, rused = 3840/7680
snd0 pst=run: play hw xrun, pused = 3840/7680
(... flood)
The same on a X220 gives me this (it's OK here):
x220$ doas sndiod -ddd
snd0 pst=cfg.default: rec=0:1 play=0:1 vol=23170 dup
helper(helper|ini): created
worker(worker|ini): created
listen(/tmp/aucat/aucat0|ini): created
sock(sock|ini): created
helper: recv: cmd = 0, num = 0, mode = 3, fd = -1
helper: send: cmd = 3, num = 0, mode = 0, fd = 3
sock,rmsg,widl: AUTH message
sock,rmsg,widl: HELLO message
sock,rmsg,widl: hello from <cmus>, mode = 1, ver 7
sock,rmsg,widl: using snd0 pst=cfg.default, mode = 1
cmus0: overwritten slot 0
snd0 pst=cfg: device requested
worker: send: cmd = 0, num = 0, mode = 3, fd = -1
worker: recv: cmd = 3, num = 0, mode = 0, fd = 6
sio(rsnd/0|ini): created
snd0 pst=ini: 48000Hz, s16le, play 0:1, rec 0:1, 8 blocks of 960 frames
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: SETPAR message
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: playback channels 0:1 -> 0:1
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: 44100Hz sample rate, 882 frame blocks
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: 13230 frame buffer
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: GETPAR message
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: GETPAR message
cmus0 vol=127,pst=ini,mmc=off,rmsg,widl: START message
cmus0 vol=127,pst=ini,mmc=off: playing s16le -> s16le
cmus0 vol=127,pst=ini,mmc=off: allocated 13230/20286 fr buffers
cmus0 vol=127,pst=sta,mmc=off: 44100Hz, s16le, play 0:1, 15 blocks of 882 frames
cmus0 vol=127,pst=sta,mmc=off,rmsg,widl: building SETVOL message, vol = 127
snd0 pst=ini: device started
snd0 pst=run: started
cmus0 vol=127,pst=run,mmc=off: attached at -7056, delta = 0
cmap: nch = 2, ostart = 0, onext = 0, istart = 0, inext = 0
resamp: 882/960
cmus0 vol=127,pst=run,mmc=off: set weight: 23170/23170
I couldn't spot any difference in the initialization, but on the run,
the former case is flooded with this pair of messages:
snd0: rec hw xrun, rused = 2880/7680
snd0: play hw xrun, pused = 4800/7680
>From source:
#define XRUN_ERROR 2 /* xruns are errors, eof/hup buffer */
OK, but I can't figure it out why this is happening on one box and not on the
other. dmesg's for both boxes below.
Thank you.
X250 dmesg:
OpenBSD 6.3-current (GENERIC.MP) #127: Tue Apr 3 14:16:30 MDT 2018
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8469942272 (8077MB)
avail mem = 8206159872 (7826MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xccbfd000 (64 entries)
bios0: vendor LENOVO version "N10ET50W (1.29 )" date 02/26/2018
bios0: LENOVO 20CL006VBR
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC ASF! HPET ECDT APIC MCFG SSDT SSDT SSDT SSDT SSDT
SSDT SSDT SSDT SSDT PCCT SSDT UEFI MSDM BATB FPDT UEFI BGRT DMAR
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3) EHC1(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2494.57 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
acpihpet0: recalibrated TSC frequency 2593999740 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2494.22 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2494.22 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2494.22 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpicpu0 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1
acpipwrres1 at acpi0: NVP3, resource for PEG_
acpipwrres2 at acpi0: NVP2, resource for PEG_
acpitz0 at acpi0: critical temperature is 128 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpicmos0 at acpi0
"LEN0071" at acpi0 not configured
"LEN0046" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "45N1773" serial 1004 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 model "45N1775" serial 632 type LION oem "SANYO"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT340F" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2601, 2600, 2500, 2300, 2100, 2000,
1800, 1700, 1500, 1400, 1200, 1100, 900, 800, 600, 500 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi
xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, mac_type 0x1d
phy_type 0xb, address 68:f7:28:f9:ce:6a
azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi
azalia1: codecs: Realtek ALC292
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3: msi
pci1 at ppb0 bus 2
rtsx0 at pci1 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi
pci2 at ppb1 bus 3
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x59, msi
ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7TD256, DXT0> SCSI3 0/direct
fixed naa.5002538500000000
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int 18
iic0 at ichiic0
pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x943300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.03 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 244197MB, 512 bytes/sector, 500116577 sectors
root on sd1a (946ec19c4a454ae0.a) swap on sd1b dump on sd1b
iwm0: hw rev 0x210, fw ver 16.242414.0, address dc:53:60:0c:83:2a
X220 dmesg:
OpenBSD 6.3-current (GENERIC.MP) #127: Tue Apr 3 14:16:30 MDT 2018
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 6303641600 (6011MB)
avail mem = 6105513984 (5822MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (64 entries)
bios0: vendor LENOVO version "8DET73WW (1.43 )" date 10/12/2016
bios0: LENOVO 4291MV7
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! TCPA SSDT
SSDT DMAR UEFI UEFI UEFI
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4) EHC1(S3)
EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2492.25 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
acpihpet0: recalibrated TSC frequency 2491907293 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.90 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.90 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.90 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 5 (EXP4)
acpiprt5 at acpi0: bus 13 (EXP5)
acpiprt6 at acpi0: bus -1 (EXP7)
acpicpu0 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu1 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu2 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu3 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpicmos0 at acpi0
"LEN0020" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "45N1023" serial 16065 type LION oem "SANYO"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
"IBM0079" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpidock0 at acpi0: GDCK docked (15)
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
cpu0: Enhanced SpeedStep 2492 MHz: speeds: 2501, 2500, 2200, 2000, 1800, 1600,
1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, mac_type 0x1c
phy_type 0xa, address f0:de:f1:7c:7b:f5
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Conexant CX20590, Intel/0x2805, using Conexant CX20590
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 1000" rev 0x00: msi, MIMO 1T2R,
BGS, address 74:e5:0b:19:5c:82
ppb2 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 5
ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 13
sdhc0 at pci4 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16
sdhc0: SDHC 3.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WDS120G1G0A-, Z331> SCSI3 0/direct
fixed naa.5001b444a69bf89b
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.0, 0x1e2b1 0x940300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
vmm0 at mainbus0: VMX/EPT
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
uhub3 at uhub2 port 1 configuration 1 interface 0 "Standard Microsystems
product 0x2514" rev 2.00/0.00 addr 3
uhub4 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
urtwn0 at uhub4 port 1 configuration 1 interface 0 "Realtek 802.11n NIC" rev
2.00/0.00 addr 3
urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address 50:3e:aa:30:f4:83
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 114470MB, 512 bytes/sector, 234435953 sectors
root on sd1a (69820133ee5efcb1.a) swap on sd1b dump on sd1b
--
db
