Latest snapshot running on 5.2.8 @win7x64 (everything works and seems to be
stable)
Do you use GPT or MBR?
Is it SATA or PATA/IDE?
Can you boot your hda0:/bsd from cd?
Can you boot from CD, mount drive and fsck it?
xx:2$ dmesg
OpenBSD 6.3-current (GENERIC) #13: Thu Apr 26 07:46:22 MDT 2018
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1056899072 (1007MB)
avail mem = 1017061376 (969MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe1000 (10 entries)
bios0: vendor innotek GmbH version "VirtualBox" date 12/01/2006
bios0: innotek GmbH VirtualBox
acpi0 at bios0: rev 2
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP APIC SSDT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz, 3492.51 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,PCLMUL,MWAIT,SSSE3,CX16,PCID,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,RDRAND,NXE,RDTSCP,LONG,LAHF,ITSC,FSGSBASE,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: CPU supports MTRRs but not enabled by BIOS
cpu0: apic clock running at 1000MHz
cpu0: mwait min=64, max=64
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
, remapped to apid 1
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(@1 halt!)
acpiac0 at acpi0: AC unit online
acpivideo0 at acpi0: GFX0
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <VBOX, CD-ROM, 1.0> ATAPI 5/cdrom removable
wd0 at pciide0 channel 0 drive 1: <VBOX HARDDISK>
wd0: 128-sector PIO, LBA, 20480MB, 41943040 sectors
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
vga1 at pci0 dev 2 function 0 "InnoTek VirtualBox Graphics Adapter" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 3 function 0 "Intel 82540EM" rev 0x02: apic 1 int 19,
address 08:00:27:7d:19:91
"InnoTek VirtualBox Guest Service" rev 0x00 at pci0 dev 4 function 0 not
configured
auich0 at pci0 dev 5 function 0 "Intel 82801AA AC97" rev 0x01: apic 1 int
21, ICH
ac97: codec id 0x83847600 (SigmaTel STAC9700)
audio0 at auich0
ohci0 at pci0 dev 6 function 0 "Apple Intrepid USB" rev 0x00: apic 1 int
22, version 1.0
piixpm0 at pci0 dev 7 function 0 "Intel 82371AB Power" rev 0x08: apic 1 int
23
iic0 at piixpm0
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 configuration 1 interface 0 "Apple OHCI root hub" rev
1.00/1.00 addr 1
uhidev0 at uhub0 port 1 configuration 1 interface 0 "VirtualBox USB Tablet"
rev 1.10/1.00 addr 2
uhidev0: iclass 3/0
ums0 at uhidev0: 5 buttons, Z and W dir
wsmouse1 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (c157cae92dc08f0c.a) swap on wd0b dump on wd0b
xx:3$
> > Hi! I installed the latest 04.10 snapshot, the install procedure went
> fine, but after reboot the VM stucks at endless boot loop . It prints only
> the "booting hda0:/bsd" line.. before reboot The 04.03 snapshot works fine.
> There is a similar experience for someone with Virtualbox 5.2.8?
>
