I have replied to this type of email several times before. The short
answer is that I don't know why it is broken and have not been able
to fix it yet. The message is there to warn and protect you from bad
things.
On Feb 3, 2006, at 7:28 AM, Dirk Fohrenkamm wrote:
Hi,
I'm trying to install OpenBSD 3.8 on a (i386)-box with a HP NetRaid
controller (three SCSI channels) which is - of course - supported
via the
ami(4) driver.
The problem is that during boot OpenBSD limits access to only one
of the
two virtual disks. During boot OpenBSD is complaining about a buggy
firmware:
<-snip->
ami0 at pci0 dev 12 function 0 "AMI MegaRAID Series 428" rev 0x03:
irq11
AMI 428/32b1632
ami0: FW A.04.03, BIOS vA.04.03, 4MB RAM
ami0: 3 channels, 16 targets, 2 logical drives
ami0: firmware buggy, limiting access to first logical disk
scsibus0 at ami0: 1 targets
<-snip->
Is there any workaround which allows me to get access to both logical
disks anyway?
Many thanks in advance
Dirk
