Damien Bergamini wrote:

Please try to force 11g mode by hand:

% ifconfig iwi0 mode 11g

I'm pretty sure the firmware crashes when scanning channels in
the 5GHz band.  This bug should affect 2915ABG adapters only.
Scanning of those channels was disabled in 3.8.

Damien


I updated to the latest 3.8-current (3.9-beta) yesterday (2006/02/03) and this is no longer a problem. Thanks for all the hard work Damien.

Jarett



New dmesg for those interested:

OpenBSD 3.9-beta (GENERIC) #0: Fri Feb  3 12:10:53 CST 2006
   [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) 64 Processor 3400+ ("AuthenticAMD" 686-class, 1024KB L2 cache) 798 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2
cpu0: AMD Powernow: TS FID VID TTP
cpu0: AMD PowerNow! K8 available states (13400,30000,33300,36600)
real mem  = 1073127424 (1047976K)
avail mem = 972492800 (949700K)
using 4278 buffers containing 53760000 bytes (52500K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 07/15/04, BIOS32 rev. 0 @ 0xf0010
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf52a0/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SiS 85C503 System" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000! 0xd0000/0xa000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SiS 755 PCI" rev 0x01
ppb0 at pci0 dev 1 function 0 "SiS 86C202 VGA" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M10 NP" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x25
pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 755: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK4019GAX>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Slimtype, COMBO LSC-24082K, JKU5> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"SiS 7013 Modem" rev 0xa0 at pci0 dev 2 function 6 not configured
auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: irq 10, SiS7012 AC97
ac97: codec id 0x414c4760 (Avance Logic ALC655)
audio0 at auich0
ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 11, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: SiS OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 4, version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: SiS OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: irq 5
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: SiS EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 0x91: irq 5, address 00:03:0d:15:2e:c7
rlphy0 at sis0 phy 1: RTL8201L 10/100 PHY, rev. 1
"Texas Instruments TSB43AB22 FireWire" rev 0x00 at pci0 dev 6 function 0 not configured
cbb0 at pci0 dev 9 function 0 "O2 Micro OZ711M1 CardBus" rev 0x20: irq 11
cbb1 at pci0 dev 9 function 1 "O2 Micro OZ711M1 CardBus" rev 0x20: irq 11
"O2 Micro OZ711Mx CardBus" rev 0x00 at pci0 dev 9 function 2 not configured
iwi0 at pci0 dev 11 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05: irq 5, address 00:0e:35:d0:df:5d
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia1 at cardslot1
biomask eb75 netmask eb75 ttymask fbf7
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

Reply via email to