On Wed, Jul 18, 2018 at 04:27:45PM +0200, Jan Stary wrote: > This is 6.3-current on and amd64 PC (dmesg below), using > > re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL > (0x2c80), msi, address 50:e5:49:36:ec:0d > > as the NIC. With a hostname.re0 that says > > inet 192.168.11.3 255.255.255.0 > > it gets configured fine, but only uses 100baseTX. > Now that I got me this 1000Mbps switch, I would like to have 1000baseT. > > Why is it that the autoselect chooses 100baseT > when both the NIC and the switch it is connected to > are capable of 1000Mbps? > > When I change the hostname.re0 to > > inet 192.168.11.3 255.255.255.0 192.168.11.255 media 1000baseT > > (and run 'doas sh /etc/netstart re0'), it becomes > > re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr 50:e5:49:36:ec:0d > index 1 priority 0 llprio 3 > groups: egress > media: Ethernet 1000baseT (none) > status: no carrier > inet 192.168.11.3 netmask 0xffffff00 broadcast 192.168.11.255 > > and indeed, I lose all conectivity. > > Is anyone seeing the same? > Is there something obvious I am missing?
Did you check the cable? Also did it work before? Or is this a new install? -- :wq Claudio > All I found on this was this old thread: > http://openbsd-archive.7691.n7.nabble.com/Forcing-re-driver-to-1000baseT-no-connection-4-4-release-td79375.html > > Jan > > > OpenBSD 6.3-current (GENERIC.MP) #38: Wed Jun 20 13:27:09 MDT 2018 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 8486780928 (8093MB) > avail mem = 8151605248 (7773MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (36 entries) > bios0: vendor Award Software International, Inc. version "F3" date 03/31/2011 > bios0: Gigabyte Technology Co., Ltd. H67MA-USB3-B3 > acpi0 at bios0: rev 0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP HPET MCFG ASPT SSPT EUDS MATS TAMG APIC SSDT > acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5) > PEX6(S5) PEX7(S5) HUB0(S5) UAR1(S3) USBE(S3) USE2(S3) AZAL(S5) PCI0(S5) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimcfg0 at acpi0 addr 0xf4000000, bus 0-63 > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.63 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.08 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.08 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.08 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 0, core 3, package 0 > cpu4 at mainbus0: apid 1 (application processor) > cpu4: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.08 MHz > cpu4: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu4: 256KB 64b/line 8-way L2 cache > cpu4: smt 1, core 0, package 0 > cpu5 at mainbus0: apid 3 (application processor) > cpu5: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.08 MHz > cpu5: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu5: 256KB 64b/line 8-way L2 cache > cpu5: smt 1, core 1, package 0 > cpu6 at mainbus0: apid 5 (application processor) > cpu6: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.08 MHz > cpu6: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu6: 256KB 64b/line 8-way L2 cache > cpu6: smt 1, core 2, package 0 > cpu7 at mainbus0: apid 7 (application processor) > cpu7: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.08 MHz > cpu7: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu7: 256KB 64b/line 8-way L2 cache > cpu7: smt 1, core 3, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > , remapped to apid 2 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PEG0) > acpiprt2 at acpi0: bus -1 (PEG1) > acpiprt3 at acpi0: bus 1 (PEX0) > acpiprt4 at acpi0: bus -1 (PEX1) > acpiprt5 at acpi0: bus -1 (PEX2) > acpiprt6 at acpi0: bus -1 (PEX3) > acpiprt7 at acpi0: bus -1 (PEX4) > acpiprt8 at acpi0: bus -1 (PEX5) > acpiprt9 at acpi0: bus 2 (PEX6) > acpiprt10 at acpi0: bus 3 (PEX7) > acpicpu0 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpicpu4 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpicpu5 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpicpu6 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpicpu7 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpibtn0 at acpi0: PWRB > acpicmos0 at acpi0 > "ICD0001" at acpi0 not configured > "INT3F0D" at acpi0 not configured > cpu0: Enhanced SpeedStep 3492 MHz: speeds: 3701, 3700, 3600, 3500, 3400, > 3300, 3200, 3100, 3000, 2900, 2800, 2700, 2600, 2500, 2400, 2300, 2200, 2100, > 1600 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09 > drm0 at inteldrm0 > inteldrm0: msi > inteldrm0: 1680x1050, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 18 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x05: msi > azalia0: codecs: Realtek/0x0889, Intel/0x2805, using Realtek/0x0889 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb5: msi > pci2 at ppb1 bus 2 > re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL > (0x2c80), msi, address 50:e5:49:36:ec:0d > rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5 > ppb2 at pci0 dev 28 function 7 "Intel 6 Series PCIE" rev 0xb5: msi > pci3 at ppb2 bus 3 > xhci0 at pci3 dev 0 function 0 "Etron EJ168 xHCI" rev 0x01: msi, xHCI 1.0 > usb1 at xhci0: USB revision 3.0 > uhub1 at usb1 configuration 1 interface 0 "Etron xHCI root hub" rev 3.00/1.00 > addr 1 > ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 23 > usb2 at ehci1: USB revision 2.0 > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5 > pci4 at ppb3 bus 4 > pcib0 at pci0 dev 31 function 0 "Intel H67 LPC" rev 0x05 > ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI 1.3 > ahci0: device on port 0 didn't come ready, TFD: 0x80<BSY> > ahci0: CLO did not complete > ahci0: port 0: 3.0Gb/s > ahci0: port 1: 3.0Gb/s > ahci0: port 2: 3.0Gb/s > ahci0: port 3: 3.0Gb/s > ahci0: port 4: 3.0Gb/s > ahci0: port 5: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, INTEL SSDSA2M040, 2CV1> SCSI3 0/direct > fixed naa.50015179593bd675 > sd0: 38166MB, 512 bytes/sector, 78165360 sectors, thin > sd1 at scsibus1 targ 1 lun 0: <ATA, ST1000LM024 HN-M, 2AR1> SCSI3 0/direct > fixed naa.50004cf207132b48 > sd1: 953868MB, 512 bytes/sector, 1953523055 sectors > sd2 at scsibus1 targ 2 lun 0: <ATA, SAMSUNG HD105SI, 1AJ1> SCSI3 0/direct > fixed naa.50024e920592fbeb > sd2: 953869MB, 512 bytes/sector, 1953525168 sectors > sd3 at scsibus1 targ 3 lun 0: <ATA, ST1500DL003-9VT1, CC32> SCSI3 0/direct > fixed naa.5000c5002f119d73 > sd3: 1430799MB, 512 bytes/sector, 2930277168 sectors > sd4 at scsibus1 targ 4 lun 0: <ATA, ST2000DM001-1CH1, CC29> SCSI3 0/direct > fixed naa.5000c50065396a7d > sd4: 1907729MB, 512 bytes/sector, 3907029168 sectors > sd5 at scsibus1 targ 5 lun 0: <ATA, ST9320320AS, SD03> SCSI3 0/direct fixed > naa.5000c50013baac5f > sd5: 305245MB, 512 bytes/sector, 625142448 sectors > ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 2 int > 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 > spdmem1 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > it0 at isa0 port 0x2e/2: IT8728F rev 1, EC port 0x290 > uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.00 addr 2 > uhidev0 at uhub3 port 2 configuration 1 interface 0 "Genius Optical Mouse" > rev 1.10/1.00 addr 3 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.00 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (c3cac300fd798ecf.a) swap on sd0b dump on sd0b >
