> On 2018-08-03, Jay Hart <jh...@kevla.org> wrote:
>>> On 2018-08-03, Jay Hart <jh...@kevla.org> wrote:
>>>> Let me add a bit more data:
>>>>
>>>> MITAC PD11BICC motherboard (running Intel Indian Bay Trail chipset I
>>>> think).
>>>>
>>>> Link to motherboard manual:
>>>> https://globalamericaninc.com/manuals/2809056.pdf
>>>>
>>>> Has both a DVI-I and VGA port. I have only tried the VGA port but assume
>>>> same issue if I use
>>>> the
>>>> DVI-I port.
>>>>
>>>> OpenBSD 6.3 installed just fine, just can't get it boot now, so I don't
>>>> think its a BIOS
>>>> setting
>>>> per se, but don't know this for a fact.
>>>>
>>>> I can't get you dmesg, else I'd post it. The info I got below was best I
>>>> could get with a cell
>>>> phone.
>>>
>>> Are you intending to run it as a graphical workstation? If not, try "b -c"
>>> at the bootloader prompt, then "disable inteldrm" and "quit". That is likely
>>> to get it booting - if so, you should be able to get a dmesg. (The on-disk
>>> kernel can be edited with "config -ef /bsd").
>>>
>> That worked and I'm able to boot and reboot box into openbsd, thanks much.
>> Exactly when will I
>> have to modify the boot command (to disable inteldrm) in order to continue
>> booting, assume every
>> time I upgrade from one release to another, and any time I install a patch
>> that relinks to
>> another
>> kernel?
>
> Whenever you change the kernel. Note that syspatch won't work with a
> modified kernel.
>
>> One thing I'm having an issue understanding is why openbsd appears not to
>> see the full 8GB of
>> RAM
>> in this box.
>>
>> Here is the dmesg:
>> OpenBSD 6.3 (GENERIC.MP) #6: Sun Jul 29 11:50:15 CEST 2018
>>
>> r...@syspatch-63-i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
>
> That's a 32-bit kernel. Try amd64 instead, bay trail supports 64-bit.
> Whoi knows, maybe video will work without further tweaking there. (It does
> work on other J1900 machines).
>
Ok, got it working on amd64, but with same issue as before on inteldrm, still
have to disable it:
System now sees 8GB RAM. Awesomeness there...
#sysctl hw
hw.machine=amd64
hw.model=Intel(R) Celeron(R) CPU J1900 @ 1.99GHz
hw.ncpu=4
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=sd0:6cbe2cb3733c587d
hw.diskcount=1
hw.sensors.cpu0.temp0=31.00 degC
hw.sensors.acpitz0.temp0=26.80 degC (zone temperature)
hw.cpuspeed=1993
hw.setperf=100
hw.vendor=AMI Corporation
hw.product=Aptio CRB
hw.uuid=00020003-0004-0005-0006-000700080009
hw.physmem=8455688192
hw.usermem=8455675904
hw.ncpufound=4
hw.allowpowerdown=1
hw.perfpolicy=manual
#demsg
OpenBSD 6.3 (GENERIC.MP) #107: Sat Mar 24 14:21:59 MDT 2018
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8455688192 (8063MB)
avail mem = 8192352256 (7812MB)
User Kernel Config
UKC> disable inteldrm
226 inteldrm* disabled
UKC> exit
Continuing...
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xebd30 (52 entries)
bios0: vendor American Megatrends Inc. version "D7400A04" date 12/21/2016
bios0: AMI Corporation Aptio CRB
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG LPIT HPET SSDT SSDT SSDT UEFI
acpi0: wakeup devices PS2K(S3) PS2M(S3) XHC1(S4) PXSX(S4) PXSX(S4) PXSX(S4)
PXSX(S4) PWRB(S0)
BRCM(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.45 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT,MELTDOWN
cpu0: 1MB 64b/line 16-way L2 cache
acpitimer0: recalibrated TSC frequency 2000005358 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 83MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 1999.99 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT,MELTDOWN
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 1999.99 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT,MELTDOWN
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 1999.99 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT,MELTDOWN
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 87 pins
acpimadt0: bogus nmi for apid 0
acpimadt0: bogus nmi for apid 2
acpimadt0: bogus nmi for apid 4
acpimadt0: bogus nmi for apid 6
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpihpet0: recalibrated TSC frequency 2000006880 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus 2 (RP04)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C2(10@500 mwait.1@0x51), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(10@500 mwait.1@0x51), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(10@500 mwait.1@0x51), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(10@500 mwait.1@0x51), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PLPE
acpipwrres1 at acpi0: PLPE
acpipwrres2 at acpi0: USBC, resource for EHC1, OTG1
acpipwrres3 at acpi0: CLK0, resource for CAM1
acpipwrres4 at acpi0: CLK1, resource for CAM0, CAM2
acpipwrres5 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 90 degC
"INT3396" at acpi0 not configured
"DMA0F28" at acpi0 not configured
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
"BCM2E1A" at acpi0 not configured
"BCM4752" at acpi0 not configured
"INTCF0B" at acpi0 not configured
"INTCF1A" at acpi0 not configured
"INTCF1C" at acpi0 not configured
"SMO91D0" at acpi0 not configured
"ATML2000" at acpi0 not configured
"INT33BD" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 2000 MHz: speeds: 1993, 1992, 1909, 1826, 1743, 1660,
1577, 1494, 1411,
1328 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Bay Trail Host" rev 0x0e
vga1 at pci0 dev 2 function 0 "Intel Bay Trail Video" rev 0x0e
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ahci0 at pci0 dev 19 function 0 "Intel Bay Trail AHCI" rev 0x0e: msi, AHCI 1.3
ahci0: port 1: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, Samsung SSD 850, EMT0> SCSI3 0/direct fixed
naa.5002538d42080137
sd0: 238475MB, 512 bytes/sector, 488397168 sectors, thin
xhci0 at pci0 dev 20 function 0 "Intel Bay Trail xHCI" rev 0x0e: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel Bay Trail TXE" rev 0x0e at pci0 dev 26 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel Bay Trail PCIE" rev 0x0e: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G (0x4c00),
msi, address
00:22:4d:d1:48:d4
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 28 function 3 "Intel Bay Trail PCIE" rev 0x0e: msi
pci2 at ppb1 bus 2
re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G (0x4c00),
msi, address
00:22:4d:d1:48:d5
rgephy1 at re1 phy 7: RTL8251 PHY, rev. 0
pcib0 at pci0 dev 31 function 0 "Intel Bay Trail LPC" rev 0x0e
ichiic0 at pci0 dev 31 function 3 "Intel Bay Trail SMBus" rev 0x0e: apic 1 int
18
iic0 at ichiic0
iic0: addr 0x2d 00=6a 01=7b 02=d0 03=d5 04=80 05=7b 07=cd 08=cc 0d=ff 0e=ff
0f=ff 10=1f 11=20
12=1b 13=48 15=1f 17=ff 18=48 19=48 1a=20 1c=1f 1d=1f 1e=1f 1f=07 20=ff 21=1f
22=ff 23=1f 24=04
25=08 2a=ae 2b=a1 2c=4d 2d=ff 2e=ff 2f=ff 34=26 35=c6 3d=ff 3e=ff 3f=ff 46=ff
47=ff 48=ff 49=ff
4a=ae 4b=a1 4c=4d 4d=ff 4e=80 4f=76 6b=48 6f=ff 72=01 76=01 79=01 7d=01 7f=ff
80=ff 81=0f 82=3f
83=3f 84=1f 85=07 86=33 87=ff 88=ff 89=ff 8a=ff 8b=ff 8c=ff 8d=ff 8e=ff 8f=ff
90=da 92=ff 94=ff
96=ff 98=ff 9a=ff 9c=ff 9e=ff a0=ff a2=ff a4=ff a6=ff a8=96 a9=64 aa=96 ab=64
ac=e1 ad=96 ae=ff
af=ff b0=01 b1=02 b2=03 b3=0c b4=0d b5=01 b6=01 b7=08 b8=08 b9=08 ba=08 bb=08
bc=08 bd=ff be=ff
bf=ff c0=7f c1=7f c4=7f c5=7f c6=50 c7=4b c8=7f c9=7f ca=50 cb=4b cc=7f cd=7f
ce=50 cf=4b d0=7f
d1=7f d2=50 d3=4b d4=7f d5=7f d6=50 d7=4b d8=ff d9=ff da=ff db=ff dc=ff dd=ff
de=ff df=ff e0=ff
e1=1f e2=ff e3=1f e4=ff e5=1f e6=ff e7=1f e8=ff e9=1f ea=ff eb=ff ec=ff ed=ff
ee=ff ef=ff f0=03
f1=03 f2=03 f3=01 f4=01 f6=2a f7=2d f8=05 f9=ff fa=ff fb=ff fc=ff fd=5c fe=5c
ff=c1 words 00=6aff
01=7bff 02=d0ff 03=d5ff 04=80ff 05=7bff 06=00ff 07=cdff
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x52
wbsio0 port 0xa10/2 not configured
vmm0 at mainbus0: VMX/EPT
uhub1 at uhub0 port 3 configuration 1 interface 0 "Alcor Micro product 0x6254"
rev 2.00/1.00 addr 2
uhub2 at uhub0 port 4 configuration 1 interface 0 "GenesysLogic USB2.0 Hub" rev
2.10/32.21 addr 3
uhub3 at uhub0 port 7 configuration 1 interface 0 "vendor 0x05e3 product
0x0612" rev 3.00/32.21
addr 4
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (6cbe2cb3733c587d.a) swap on sd0b dump on sd0b
