same problem with 30-01-06 snapshot (burned from ISO). An external
USB keyboard works fine. dmesg follows:
[ bsd ELF symbol table not valid: symtab unaligned ]
[ no symbol table formats found ]
console out [ATY,Jasper_A]console in [keyboard] USB and ADB found,
using USB
using parent ATY,JasperParent:: memaddr b8000000 size 8000000, :
consaddr bc008000, : ioaddr b0020000, size 20000: memtag 8000, iotag
8000: width 1280 linebytes 1280 height 854 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved. http://
www.OpenBSD.org
OpenBSD 3.9-beta (RAMDISK) #779: Mon Jan 30 19:14:24 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/macppc/compile/
RAMDISK
real mem = 1342177280 (1310720K)
avail mem = 1214750720 (1186280K)
using 1254 buffers containing 67108864 bytes (65536K) of memory
mainbus0 (root): model PowerBook5,2
cpu0 at mainbus0: Version 8002 (Revision 0x101): 1249 MHz
memc0 at mainbus0: uni-n
hw-clock at memc0 not configured
ki2c0 at memc0 offset 0xf8001000
mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
find_node_intr unable to find step size
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Radeon Mobility M10 NP" rev
0x00, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x5
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
"Broadcom BCM4306" rev 0x03 at pci1 dev 18 function 0 not configured
cbb0 at pci1 dev 19 function 0 "Texas Instruments PCI1510 CardBus"
rev 0x00: irq 53
macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0 offset 0x9 irq 47
programmer-switch at macgpio0 offset 0x11 not configured
gpio4 at macgpio0 offset 0x1e not configured
frequency-gpio at macgpio0 offset 0x1a not configured
voltage-gpio at macgpio0 offset 0x1b not configured
slewing-done at macgpio0 offset 0x12 not configured
gpio5 at macgpio0 offset 0x6f not configured
gpio6 at macgpio0 offset 0x70 not configured
extint-gpio4 at macgpio0 offset 0x5c not configured
gpio11 at macgpio0 offset 0x75 not configured
extint-gpio15 at macgpio0 offset 0x67 not configured
escc-legacy at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
i2s at macobio0 offset 0x10000 not configured
timer at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 0 targets
battery at macobio0 offset 0x0 not configured
backlight at macobio0 offset 0xf300 not configured
i2c at macobio0 offset 0x18000 not configured
wdc0 at macobio0 offset 0x20000 irq 24: DMA
atapiscsi0 at wdc0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-R UJ-816, DXJ3> SCSI0 5/
cdrom removable
cd0(wdc0:0:0): using BIOS timings, DMA mode 2
ohci0 at pci1 dev 24 function 0 "Apple Intrepid USB" rev 0x00: irq 0,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: irq 0,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq
29, version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ohci3 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0
usb3 at ohci3: USB revision 1.0
uhub3 at usb3
uhub3: NEC OHCI root hub, rev 1.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
ohci4 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0
usb4 at ohci4: USB revision 1.0
uhub4 at usb4
uhub4: NEC OHCI root hub, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63
usb5 at ehci0: USB revision 2.0
uhub5 at usb5
uhub5: NEC EHCI root hub, rev 2.00/1.00, addr 1
uhub5: 5 ports with 5 removable, self powered
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x20
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00
wdc1 at kauaiata0 irq 39: DMA
wd0 at wdc1 channel 0 drive 0: <FUJITSU MHT2080AT>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
"Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not
configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41,
address 00:0a:95:cd:87:c4
eephy0 at gem0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 1
rd0: fixed, 8192 blocks
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: vendor 0x05ac product 0x1000, rev 2.00/15.86, addr 2, iclass
3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1
uhidev1: vendor 0x05ac product 0x1000, rev 2.00/15.86, addr 2, iclass
3/1
uhid0 at uhidev1: input=3, output=0, feature=1
bootpath: '/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL
PROTECTED]/3.9/macppc/bsd.rd'
rootdev=0x1100 rrootdev=0x1100 rawdev=0x1102
WARNING: clock gained 6 days -- CHECK AND RESET THE DATE!
uhidev2 at uhub4 port 1 configuration 1 interface 0
uhidev2: Chicony USB Keyboard, rev 1.10/1.00, addr 2, iclass 3/1
ukbd1 at uhidev2
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhidev3 at uhub4 port 1 configuration 1 interface 1
uhidev3: Chicony USB Keyboard, rev 1.10/1.00, addr 2, iclass 3/1
uhid1 at uhidev3: input=4, output=0, feature=0
ural0 at uhub5 port 1
ural0: Ralink 802.11g WLAN + Pen Drive, rev 2.00/0.01, addr 2
ural0: MAC/BBP RT2570 (rev 0x03), RF RT2526, address 00:0f:ea:61:5b:70
I'm willing to test kernels, but 'able' is questionable: currently
whole HDD is HFS+ , so whilst .iso's are easiest to test, I'll try &
do an install onto a USB disk to test kernels if necessary.
/Pete
On 6. feb. 2006, at 22.55, Miod Vallat wrote:
on my powerbook5,2 (G4 15"), runs through booting fine, but at the
install,upgrade,shell prompt, the keyboard doesn't work ( but <shift>
still lights the LED)
Can you try the latest snapshot (January 30th)? If the built-in
keyboard
still fails to work, can you plug an external USB keyboard to get the
dmesg? And are you willing to test kernels if the problem still
arises?
Miod