Hello, I've recently performed an install of i386 OpenBSD 6.4 on a HP T5740 thin client (Atom N280, 2GB DDR3, 2GB FLASH, more info on parkytowers.me.uk) and I keep running into uvm_fault errors at xenodm startup when booting. At this point the whole computer freeyes, even ddb prompt appearing after the error message doesn't work. Single user boots fine, and doesn't produce any errors whatsoever. I have attached the single mode dmesg, the disklabel output (I use the install defaults), and pcidump output with this email.
When booting without any options at boot> prompt, the machine boots normally until it starts xenodm, at which point the screen flashes black, as expected at xenodm startup, but then goes back to console, presenting the following error message: uvm_fault(0x0d0d55bf0, 0xd2eaf000, 0, 2) -> e kernel: page fault trap, code=0 Stopped at uvm_pmr_get1page+0x35d: movl %ecx, 0(%edi,%eax,1) ddb{1}> When booting bsd.sp kernel, results are very inconclusive. Most often it results in the same crash as bsd.mp, but in very rare cases it also crashes at kernel relink time. This didn't want to happen the many times I have restarted the machine on purpose to trigger the relink, if anyone can help me force the relink on the bsd.sp kernel, please let me know. When it reaches the xenodm startup, it fails at the same assembly line as the bsd.mp kernel. I have also tested these machines with Alpine Linux, which runs very stable (I use one of them as my home WiFi access point), so I don't believe that the machine itself is faulty. What would be the next step at solving this problem? -- Thanks in advance Kristjan Komloši -- Dobite me lahko preko/you can contact me through: Mail (šola/school): kristjan.koml...@sg.sckr.si Mail (privat/private): kristjan.koml...@gmail.com Tel: +386 31 679 339 (po 14. uri / after 14:00 CEST)
# /dev/rwd0c: type: ESDI disk: ESDI/IDE disk label: 2GB ATA Flash Di duid: 367182f625b2c5e3 flags: bytes/sector: 512 sectors/track: 63 tracks/cylinder: 64 sectors/cylinder: 4032 cylinders: 992 total sectors: 4000752 # total bytes: 1953.5M boundstart: 64 boundend: 3999744 drivedata: 0 16 partitions: # size offset fstype [fsize bsize cpg] a: 1889.3M 64 4.2BSD 2048 16384 12958 # / b: 63.6M 3869440 swap # none c: 1953.5M 0 unused
OpenBSD 6.4 (GENERIC.MP) #943: Thu Oct 11 13:51:32 MDT 2018 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP real mem = 2076327936 (1980MB) avail mem = 2023350272 (1929MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 11/12/09, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.6 @ 0xfd070 (43 entries) bios0: vendor American Megatrends Inc. version "786R8 v1.01" date 11/12/2009 bios0: Hewlett-Packard hp t5740 acpi0 at bios0: rev 0 acpi0: sleep states S0 S5 acpi0: tables DSDT FACP APIC MCFG OEMB GSCI SSDT acpi0: wakeup devices P0P2(S0) P0P1(S0) USB0(S0) USB1(S0) USB2(S0) USB5(S0) EUSB(S0) USB3(S0) USB4(S0) USB6(S0) USBE(S0) P0P4(S0) P0P5(S0) P0P6(S0) P0P7(S0) P0P8(S0) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz, 06-1c-02 cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,NXE,LAHF,PERF,SENSOR,MELTDOWN mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 166MHz cpu0: mwait min=64, max=64, C-substates=0.2.2.0.2, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Atom(TM) CPU N280 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz, 06-1c-02 cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,NXE,LAHF,PERF,SENSOR,MELTDOWN ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xe0000000, bus 0-255 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P2) acpiprt2 at acpi0: bus 1 (P0P1) acpiprt3 at acpi0: bus 2 (P0P4) acpiprt4 at acpi0: bus -1 (P0P5) acpiprt5 at acpi0: bus -1 (P0P6) acpiprt6 at acpi0: bus -1 (P0P7) acpiprt7 at acpi0: bus 3 (P0P8) acpiprt8 at acpi0: bus 4 (P0P9) acpicpu0 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS acpicmos0 at acpi0 acpibtn0 at acpi0: PWRB acpivideo0 at acpi0: GFX0 bios0: ROM list: 0xc0000/0xfc00! 0xd0000/0x2000 cpu0: Enhanced SpeedStep 1663 MHz: speeds: 1667, 1333, 1000 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x09 inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x09 drm0 at inteldrm0 intagp0 at inteldrm0 agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 inteldrm0: msi inteldrm0: 1024x768, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel GM45 Video" rev 0x09 at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 19 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 18 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi azalia0: codecs: Realtek ALC272, Intel/0x2802, using Realtek ALC272 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 2 int 17 pci1 at ppb0 bus 2 ppb1 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 2 int 17 pci2 at ppb1 bus 3 "Broadcom BCM4315" rev 0x01 at pci2 dev 0 function 0 not configured ppb2 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: apic 2 int 16 pci3 at ppb2 bus 4 bge0 at pci3 dev 0 function 0 "Broadcom BCM57780" rev 0x01, BCM57780 A1 (0x57780001): msi, address 18:a9:05:6b:b9:b6 brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23 uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 19 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 pci4 at ppb3 bus 1 pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03 pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 2 int 19 for native-PCI interrupt wd0 at pciide0 channel 1 drive 0: <2GB ATA Flash Disk> wd0: 1-sector PIO, LBA, 1953MB, 4000752 sectors wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4 ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x03: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide1: using apic 2 int 19 for native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 uhidev0 at uhub7 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 1.10/22.40 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub7 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 1.10/22.40 addr 2 uhidev1: iclass 3/1, 17 report ids ums0 at uhidev1 reportid 2: 8 buttons, Z and W dir wsmouse0 at ums0 mux 0 uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0 uhid2 at uhidev1 reportid 16: input=6, output=6, feature=0 uhid3 at uhidev1 reportid 17: input=19, output=19, feature=0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (367182f625b2c5e3.a) swap on wd0b dump on wd0b WARNING: / was not properly unmounted WARNING: R/W mount of / denied. Filesystem is not clean - run fsck
Domain /dev/pci0: 0:0:0: Intel GM45 Host 0:2:0: Intel GM45 Video 0:2:1: Intel GM45 Video 0:26:0: Intel 82801I USB 0:26:1: Intel 82801I USB 0:26:2: Intel 82801I USB 0:26:7: Intel 82801I USB 0:27:0: Intel 82801I HD Audio 0:28:0: Intel 82801I PCIE 0:28:4: Intel 82801I PCIE 0:28:5: Intel 82801I PCIE 0:29:0: Intel 82801I USB 0:29:1: Intel 82801I USB 0:29:2: Intel 82801I USB 0:29:7: Intel 82801I USB 0:30:0: Intel 82801BAM Hub-to-PCI 0:31:0: Intel 82801IBM LPC 0:31:2: Intel 82801I SATA 0:31:3: Intel 82801I SMBus 0:31:5: Intel 82801I SATA 3:0:0: Broadcom BCM4315 4:0:0: Broadcom BCM57780