If you are using startx, it won't work anymore after 001 security fix. Please switch to using xenodm(1).
There were a couple of discussions on this list about this, you can search archives for more details. On Wed, Nov 21, 2018, at 4:12 PM, Manuel Solis wrote: > Hello Misc. > > I have installed 64 in a macbook and it works great and out of the box, > however i notice that after i run syspatch and reboot, xorg doesn´t start > at all. > > I have done several tries like install64 - syspatch - error ; install64 > -fw_update -syspatch - error; > > May i missing some sysctl trick ????? > > Thank you all. > > Manuel > > =========================================================== > ======= Xorg.0.log after syspatch with Xorg not working =============== > =========================================================== > [ 39.473] > X.Org X Server 1.19.6 > Release Date: 2017-12-20 > [ 39.536] X Protocol Version 11, Revision 0 > [ 39.562] Build Operating System: OpenBSD 6.4 amd64 > [ 39.570] Current Operating System: OpenBSD mac.book 6.4 GENERIC.MP#364 > amd64 > [ 39.579] Build Date: 25 October 2018 11:39:05PM > [ 39.588] > [ 39.596] Current version of pixman: 0.34.0 > [ 39.605] Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > [ 39.605] Markers: (--) probed, (**) from config file, (==) default > setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > [ 39.639] (==) Log file: "/home/msolis/.local/share/xorg/Xorg.0.log", > Time: Wed Nov 21 17:44:59 2018 > [ 39.649] (==) Using system config directory > "/usr/X11R6/share/X11/xorg.conf.d" > [ 39.650] (==) No Layout section. Using the first Screen section. > [ 39.650] (==) No screen section available. Using defaults. > [ 39.650] (**) |-->Screen "Default Screen Section" (0) > [ 39.650] (**) | |-->Monitor "<default monitor>" > [ 39.650] (==) No monitor specified for screen "Default Screen Section". > Using a default monitor configuration. > [ 39.650] (==) Automatically adding devices > [ 39.650] (==) Automatically enabling devices > [ 39.650] (==) Not automatically adding GPU devices > [ 39.650] (==) Max clients allowed: 256, resource mask: 0x1fffff > [ 39.654] (==) FontPath set to: > /usr/X11R6/lib/X11/fonts/misc/, > /usr/X11R6/lib/X11/fonts/TTF/, > /usr/X11R6/lib/X11/fonts/OTF/, > /usr/X11R6/lib/X11/fonts/Type1/, > /usr/X11R6/lib/X11/fonts/100dpi/, > /usr/X11R6/lib/X11/fonts/75dpi/ > [ 39.654] (==) ModulePath set to "/usr/X11R6/lib/modules" > [ 39.654] (II) The server relies on wscons to provide the list of input > devices. > If no devices become available, reconfigure wscons or disable > AutoAddDevices. > [ 39.654] (II) Loader magic: 0x2de2fe71000 > [ 39.654] (II) Module ABI versions: > [ 39.654] X.Org ANSI C Emulation: 0.4 > [ 39.654] X.Org Video Driver: 23.0 > [ 39.654] X.Org XInput driver : 24.1 > [ 39.654] X.Org Server Extension : 10.0 > [ 39.654] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem > (Permission denied) > Check that you have set 'machdep.allowaperture=1' > in /etc/sysctl.conf and reboot your machine > refer to xf86(4) for details > [ 39.654] linear framebuffer access unavailable > [ 39.654] (II) LoadModule: "glx" > [ 39.656] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so > [ 39.663] (II) Module glx: vendor="X.Org Foundation" > [ 39.663] compiled for 1.19.6, module version = 1.0.0 > [ 39.663] ABI class: X.Org Server Extension, version 10.0 > [ 39.663] (==) Assigned the driver to the xf86ConfigLayout > [ 39.663] (EE) No drivers available. > [ 39.663] (EE) > Fatal server error: > [ 39.671] (EE) no screens found(EE) > [ 39.680] (EE) > Please consult the The X.Org Foundation support > at http://wiki.x.org > for help. > [ 39.688] (EE) Please also check the log file at > "/home/msolis/.local/share/xorg/Xorg.0.log" for additional information. > [ 39.697] (EE) > [ 39.706] (EE) Server terminated with error (1). Closing log file. > > ========================================================== > ===============working Xorg.0.log just after new installation ========= > ========================================================== > [ 50.434] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem > (Operation not permitted) > Check that you have set 'machdep.allowaperture=1' > in /etc/sysctl.conf and reboot your machine > refer to xf86(4) for details > [ 50.434] linear framebuffer access unavailable > [ 50.457] (--) Using wscons driver on /dev/ttyC4 > [ 50.471] > X.Org X Server 1.19.6 > Release Date: 2017-12-20 > [ 50.471] X Protocol Version 11, Revision 0 > [ 50.471] Build Operating System: OpenBSD 6.4 amd64 > [ 50.472] Current Operating System: OpenBSD mac.my.domain 6.4 > GENERIC.MP#364 amd64 > [ 50.472] Build Date: 11 October 2018 01:50:08PM > [ 50.472] > [ 50.472] Current version of pixman: 0.34.0 > [ 50.472] Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > [ 50.472] Markers: (--) probed, (**) from config file, (==) default > setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > [ 50.472] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 21 > 18:04:08 2018 > [ 50.474] (==) Using system config directory > "/usr/X11R6/share/X11/xorg.conf.d" > [ 50.474] (==) No Layout section. Using the first Screen section. > [ 50.474] (==) No screen section available. Using defaults. > [ 50.474] (**) |-->Screen "Default Screen Section" (0) > [ 50.474] (**) | |-->Monitor "<default monitor>" > [ 50.475] (==) No monitor specified for screen "Default Screen Section". > Using a default monitor configuration. > [ 50.475] (==) Automatically adding devices > [ 50.475] (==) Automatically enabling devices > [ 50.475] (==) Not automatically adding GPU devices > [ 50.475] (==) Max clients allowed: 256, resource mask: 0x1fffff > [ 50.479] (==) FontPath set to: > /usr/X11R6/lib/X11/fonts/misc/, > /usr/X11R6/lib/X11/fonts/TTF/, > /usr/X11R6/lib/X11/fonts/OTF/, > /usr/X11R6/lib/X11/fonts/Type1/, > /usr/X11R6/lib/X11/fonts/100dpi/, > /usr/X11R6/lib/X11/fonts/75dpi/ > [ 50.479] (==) ModulePath set to "/usr/X11R6/lib/modules" > [ 50.479] (II) The server relies on wscons to provide the list of input > devices. > If no devices become available, reconfigure wscons or disable > AutoAddDevices. > [ 50.479] (II) Loader magic: 0x12c9af571000 > [ 50.479] (II) Module ABI versions: > [ 50.479] X.Org ANSI C Emulation: 0.4 > [ 50.479] X.Org Video Driver: 23.0 > [ 50.479] X.Org XInput driver : 24.1 > [ 50.479] X.Org Server Extension : 10.0 > [ 50.479] (--) PCI:*(0:0:2:0) 8086:162b:106b:013f rev 9, Mem @ > 0xc0000000/16777216, 0xb0000000/268435456, I/O @ 0x00003000/64 > [ 50.479] (II) LoadModule: "glx" > [ 50.481] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so > [ 50.488] (II) Module glx: vendor="X.Org Foundation" > [ 50.488] compiled for 1.19.6, module version = 1.0.0 > [ 50.488] ABI class: X.Org Server Extension, version 10.0 > [ 50.489] (==) Matched modesetting as autoconfigured driver 0 > [ 50.489] (==) Assigned the driver to the xf86ConfigLayout > [ 50.489] (II) LoadModule: "modesetting" > [ 50.489] (II) Loading /usr/X11R6/lib/modules/drivers/modesetting_drv.so > [ 50.490] (II) Module modesetting: vendor="X.Org Foundation" > [ 50.490] compiled for 1.19.6, module version = 1.19.6 > [ 50.490] Module class: X.Org Video Driver > [ 50.490] ABI class: X.Org Video Driver, version 23.0 > [ 50.490] (II) modesetting: Driver for Modesetting Kernel Drivers: kms > [ 50.490] (**) modeset(0): claimed PCI slot 0@0:2:0 > [ 50.490] (II) modeset(0): using default device > [ 50.490] (II) modeset(0): Creating default Display subsection in Screen > section > "Default Screen Section" for depth/fbbpp 24/32 > [ 50.491] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 > [ 50.491] (==) modeset(0): RGB weight 888 > [ 50.491] (==) modeset(0): Default visual is TrueColor > [ 50.491] (II) Loading sub module "glamoregl" > [ 50.491] (II) LoadModule: "glamoregl" > [ 50.492] (II) Loading /usr/X11R6/lib/modules/libglamoregl.so > [ 50.503] (II) Module glamoregl: vendor="X.Org Foundation" > [ 50.503] compiled for 1.19.6, module version = 1.0.0 > [ 50.503] ABI class: X.Org ANSI C Emulation, version 0.4 > [ 50.503] (II) glamor: OpenGL accelerated X.org driver based. > [ 50.530] (II) glamor: EGL version 1.4 (DRI2): > [ 50.539] (II) modeset(0): glamor initialized > [ 50.541] (II) modeset(0): Output eDP-1 has no monitor section > [ 50.541] (II) modeset(0): Output DP-1 has no monitor section > [ 50.541] (II) modeset(0): Output HDMI-1 has no monitor section > [ 50.541] (II) modeset(0): Output DP-2 has no monitor section > [ 50.542] (II) modeset(0): Output HDMI-2 has no monitor section > [ 50.543] (II) modeset(0): EDID for output eDP-1 > [ 50.543] (II) modeset(0): Manufacturer: APP Model: a02a Serial#: 0 > [ 50.543] (II) modeset(0): Year: 2014 Week: 10 > [ 50.543] (II) modeset(0): EDID Version: 1.4 > [ 50.543] (II) modeset(0): Digital Display Input > [ 50.543] (II) modeset(0): 8 bits per channel > [ 50.543] (II) modeset(0): Digital interface is DisplayPort > [ 50.543] (II) modeset(0): Max Image Size [cm]: horiz.: 29 vert.: 18 > [ 50.543] (II) modeset(0): Gamma: 2.20 > [ 50.543] (II) modeset(0): No DPMS capabilities specified > [ 50.543] (II) modeset(0): Supported color encodings: RGB 4:4:4 > [ 50.543] (II) modeset(0): First detailed timing is preferred mode > [ 50.543] (II) modeset(0): Preferred mode is native pixel format and > refresh rate > [ 50.543] (II) modeset(0): redX: 0.653 redY: 0.334 greenX: 0.300 > greenY: 0.620 > [ 50.543] (II) modeset(0): blueX: 0.146 blueY: 0.050 whiteX: 0.312 > whiteY: 0.329 > [ 50.543] (II) modeset(0): Manufacturer's mask: 0 > [ 50.543] (II) modeset(0): Supported detailed timing: > [ 50.543] (II) modeset(0): clock: 268.5 MHz Image Size: 286 x 179 mm > [ 50.543] (II) modeset(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 > h_blank_end 2720 h_border: 0 > [ 50.543] (II) modeset(0): v_active: 1600 v_sync: 1603 v_sync_end 1609 > v_blanking: 1646 v_border: 0 > [ 50.543] (II) modeset(0): Monitor name: Color LCD > [ 50.543] (II) modeset(0): EDID (in hex): > [ 50.544] (II) modeset(0): 00ffffffffffff0006102aa000000000 > [ 50.544] (II) modeset(0): 0a180104a51d1278026fb1a7554c9e25 > [ 50.544] (II) modeset(0): 0c505400000001010101010101010101 > [ 50.544] (II) modeset(0): 010101010101e26800a0a0402e603020 > [ 50.544] (II) modeset(0): 36001eb31000001a000000fc00436f6c > [ 50.544] (II) modeset(0): 6f72204c43440a202020000000100000 > [ 50.544] (II) modeset(0): 00000000000000000000000000000010 > [ 50.544] (II) modeset(0): 00000000000000000000000000000075 > [ 50.544] (II) modeset(0): Printing probed modes for output eDP-1 > [ 50.544] (II) modeset(0): Modeline "2560x1600"x60.0 268.50 2560 2608 > 2640 2720 1600 1603 1609 1646 +hsync -vsync (98.7 kHz eP) > [ 50.544] (II) modeset(0): Modeline "2048x1536"x60.0 266.95 2048 2200 > 2424 2800 1536 1537 1540 1589 -hsync +vsync (95.3 kHz d) > [ 50.544] (II) modeset(0): Modeline "1920x1440"x60.0 234.00 1920 2048 > 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz d) > [ 50.544] (II) modeset(0): Modeline "1856x1392"x60.0 218.30 1856 1952 > 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.4 kHz d) > [ 50.544] (II) modeset(0): Modeline "1792x1344"x60.0 204.80 1792 1920 > 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.7 kHz d) > [ 50.544] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 > 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d) > [ 50.544] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 > 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d) > [ 50.544] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 > 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d) > [ 50.544] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 > 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d) > [ 50.544] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 > 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d) > [ 50.544] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 > 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) > [ 50.544] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 > 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d) > [ 50.544] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 > 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d) > [ 50.544] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 > 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d) > [ 50.544] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 > 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d) > [ 50.544] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 > 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) > [ 50.544] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 > 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) > [ 50.544] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 > 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d) > [ 50.544] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 > 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d) > [ 50.544] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 > 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d) > [ 50.544] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 > 800 480 490 492 525 -hsync -vsync (31.5 kHz d) > [ 50.544] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 > 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d) > [ 50.544] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 > 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d) > [ 50.544] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 > 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d) > [ 50.544] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 > 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d) > [ 50.544] (II) modeset(0): EDID for output DP-1 > [ 50.544] (II) modeset(0): EDID for output HDMI-1 > [ 50.544] (II) modeset(0): EDID for output DP-2 > [ 50.545] (II) modeset(0): EDID for output HDMI-2 > [ 50.545] (II) modeset(0): Output eDP-1 connected > [ 50.545] (II) modeset(0): Output DP-1 disconnected > [ 50.545] (II) modeset(0): Output HDMI-1 disconnected > [ 50.545] (II) modeset(0): Output DP-2 disconnected > [ 50.545] (II) modeset(0): Output HDMI-2 disconnected > [ 50.545] (II) modeset(0): Using exact sizes for initial modes > [ 50.545] (II) modeset(0): Output eDP-1 using initial mode 2560x1600 +0+0 > [ 50.545] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) > [ 50.545] (==) modeset(0): DPI set to (96, 96) > [ 50.545] (II) Loading sub module "fb" > [ 50.545] (II) LoadModule: "fb" > [ 50.546] (II) Loading /usr/X11R6/lib/modules/libfb.so > [ 50.547] (II) Module fb: vendor="X.Org Foundation" > [ 50.547] compiled for 1.19.6, module version = 1.0.0 > [ 50.547] ABI class: X.Org ANSI C Emulation, version 0.4 > [ 50.547] (==) Depth 24 pixmap format is 32 bpp > [ 50.707] (==) modeset(0): Backing store enabled > [ 50.707] (==) modeset(0): Silken mouse enabled > [ 50.707] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR > disabled message. > [ 50.708] (II) modeset(0): Initializing kms color map > [ 50.709] (==) modeset(0): DPMS enabled > [ 50.709] (II) modeset(0): [DRI2] Setup complete > [ 50.709] (II) modeset(0): [DRI2] DRI driver: i965 > [ 50.709] (II) modeset(0): [DRI2] VDPAU driver: i965 > [ 50.709] (--) RandR disabled > [ 50.728] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer > [ 50.728] (II) AIGLX: enabled GLX_ARB_create_context > [ 50.728] (II) AIGLX: enabled GLX_ARB_create_context_profile > [ 50.728] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile > [ 50.728] (II) AIGLX: enabled GLX_INTEL_swap_event > [ 50.728] (II) AIGLX: enabled GLX_SGI_swap_control > [ 50.728] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB > [ 50.728] (II) AIGLX: enabled GLX_ARB_fbconfig_float > [ 50.728] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float > [ 50.728] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer > objects > [ 50.728] (II) AIGLX: enabled GLX_ARB_create_context_robustness > [ 50.728] (II) AIGLX: Loaded and initialized i965 > [ 50.728] (II) GLX: Initialized DRI2 GL provider for screen 0 > [ 50.734] (II) modeset(0): Damage tracking initialized > [ 50.734] (II) modeset(0): Setting screen physical size to 677 x 423 > [ 50.844] (II) config/wscons: checking input device /dev/wskbd > [ 50.844] (II) wskbd: using layout es > [ 50.845] (II) LoadModule: "kbd" > [ 50.845] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so > [ 50.846] (II) Module kbd: vendor="X.Org Foundation" > [ 50.846] compiled for 1.19.6, module version = 1.9.0 > [ 50.846] Module class: X.Org XInput Driver > [ 50.846] ABI class: X.Org XInput driver, version 24.1 > [ 50.846] (II) Using input driver 'kbd' for '/dev/wskbd' > [ 50.846] (**) /dev/wskbd: always reports core events > [ 50.846] (**) /dev/wskbd: always reports core events > [ 50.846] (**) Option "Protocol" "standard" > [ 50.846] (**) Option "XkbRules" "base" > [ 50.846] (**) Option "XkbModel" "pc105" > [ 50.846] (**) Option "XkbLayout" "es" > [ 50.846] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: > KEYBOARD, id 6) > [ 50.878] (II) config/wscons: checking input device /dev/wsmouse1 > [ 50.878] (II) LoadModule: "ws" > [ 50.879] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so > [ 50.879] (II) Module ws: vendor="X.Org Foundation" > [ 50.879] compiled for 1.19.6, module version = 1.3.0 > [ 50.879] Module class: X.Org XInput Driver > [ 50.879] ABI class: X.Org XInput driver, version 24.1 > [ 50.879] (II) Using input driver 'ws' for '/dev/wsmouse1' > [ 50.880] (**) /dev/wsmouse1: always reports core events > [ 50.880] (II) ws: /dev/wsmouse1: debuglevel 0 > [ 50.880] (**) Option "Device" "/dev/wsmouse1" > [ 50.880] (**) ws: /dev/wsmouse1: ZAxisMapping: buttons 4 and 5 > [ 50.880] (**) ws: /dev/wsmouse1: WAxisMapping: buttons 6 and 7 > [ 50.880] (**) ws: /dev/wsmouse1: associated screen: 0 > [ 50.880] (II) ws: /dev/wsmouse1: minimum x position: 0 > [ 50.880] (II) ws: /dev/wsmouse1: maximum x position: 2559 > [ 50.880] (II) ws: /dev/wsmouse1: minimum y position: 0 > [ 50.880] (II) ws: /dev/wsmouse1: maximum y position: 1599 > [ 50.880] (==) ws: /dev/wsmouse1: Buttons: 7 > [ 50.881] (**) ws: /dev/wsmouse1: YAxisMapping: buttons 4 and 5 > [ 50.881] (II) XINPUT: Adding extended input device "/dev/wsmouse1" > (type: MOUSE, id 7) > [ 50.882] (**) /dev/wsmouse1: (accel) keeping acceleration scheme 1 > [ 50.882] (**) /dev/wsmouse1: (accel) acceleration profile 0 > [ 50.882] (**) /dev/wsmouse1: (accel) acceleration factor: 2.000 > [ 50.882] (**) /dev/wsmouse1: (accel) acceleration threshold: 4 > [ 50.882] (II) config/wscons: checking input device /dev/wsmouse > [ 50.882] (II) Using input driver 'ws' for '/dev/wsmouse' > [ 50.882] (**) /dev/wsmouse: always reports core events > [ 50.882] (II) ws: /dev/wsmouse: debuglevel 0 > [ 50.882] (**) Option "Device" "/dev/wsmouse" > [ 50.882] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5 > [ 50.882] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7 > [ 50.882] (**) ws: /dev/wsmouse: associated screen: 0 > [ 50.882] (II) ws: /dev/wsmouse: minimum x position: 0 > [ 50.882] (II) ws: /dev/wsmouse: maximum x position: 2559 > [ 50.882] (II) ws: /dev/wsmouse: minimum y position: 0 > [ 50.882] (II) ws: /dev/wsmouse: maximum y position: 1599 > [ 50.882] (==) ws: /dev/wsmouse: Buttons: 7 > [ 50.882] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5 > [ 50.882] (II) XINPUT: Adding extended input device "/dev/wsmouse" > (type: MOUSE, id 8) > [ 50.883] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1 > [ 50.883] (**) /dev/wsmouse: (accel) acceleration profile 0 > [ 50.883] (**) /dev/wsmouse: (accel) acceleration factor: 2.000 > [ 50.883] (**) /dev/wsmouse: (accel) acceleration threshold: 4 > [ 117.112] (II) UnloadModule: "ws" > [ 117.112] (II) UnloadModule: "ws" > [ 117.112] (II) UnloadModule: "kbd" > [ 117.508] (II) Server terminated successfully (0). Closing log file. > > > =================================================== > ===================dmesg=========================== > =================================================== > OpenBSD 6.4 (GENERIC.MP) #0: Sat Nov 17 22:15:46 CET 2018 > r...@syspatch-64-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/ > GENERIC.MP > real mem = 8469352448 (8077MB) > avail mem = 8203399168 (7823MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x8afac000 (32 entries) > bios0: vendor Apple Inc. version "MBP121.88Z.0177.B00.1806051659" date > 06/05/2018 > bios0: Apple Inc. MacBookPro12,1 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP HPET APIC SBST ECDT SSDT SSDT SSDT SSDT SSDT > SSDT > SSDT SSDT DMAR MCFG > acpi0: wakeup devices PEG0(S3) EC__(S3) HDEF(S3) RP01(S3) RP02(S3) > RP03(S4) > ARPT(S4) RP05(S3) RP06(S3) SPIT(S3) XHC1(S3) ADP1(S3) LID0(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-5257U CPU @ 2.70GHz, 2600.39 MHz, 06-3d-04 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS- > CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM, > 3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i5-5257U CPU @ 2.70GHz, 2600.00 MHz, 06-3d-04 > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS- > CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM, > 3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 1 (application processor) > cpu2: Intel(R) Core(TM) i5-5257U CPU @ 2.70GHz, 2600.00 MHz, 06-3d-04 > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS- > CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM, > 3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 1, core 0, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) i5-5257U CPU @ 2.70GHz, 2600.00 MHz, 06-3d-04 > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS- > CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM, > 3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 1, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins > acpiec0 at acpi0 > acpimcfg0 at acpi0 > acpimcfg0: addr 0xe0000000, bus 0-155 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PEG0) > acpiprt2 at acpi0: bus 1 (RP01) > acpiprt3 at acpi0: bus 2 (RP02) > acpiprt4 at acpi0: bus 3 (RP03) > acpiprt5 at acpi0: bus 5 (RP05) > acpiprt6 at acpi0: bus 4 (RP06) > acpicpu0 at acpi0: C3(200@530 mwait.1@0x60), C2(200@148 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C3(200@530 mwait.1@0x60), C2(200@148 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C3(200@530 mwait.1@0x60), C2(200@148 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C3(200@530 mwait.1@0x60), C2(200@148 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpisbs0 at acpi0: SBS0 model "bq20z451" serial 22651 type LION oem "DP" > acpicmos0 at acpi0 > "APP0001" at acpi0 not configured > "ACPI0008" at acpi0 not configured > "ACPI0001" at acpi0 not configured > "APP000D" at acpi0 not configured > acpiac0 at acpi0: AC unit offline > acpibtn0 at acpi0: LID0 > acpibtn1 at acpi0: PWRB > "APP0002" at acpi0 not configured > acpibtn2 at acpi0: SLPB > acpivideo0 at acpi0: IGPU > acpivout0 at acpivideo0: DD01 > cpu0: Enhanced SpeedStep 2600 MHz: speeds: 2701, 2700, 2600, 2300, 2000, > 1800, 1600, 1400, 1200, 900, 700, 500 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09 > inteldrm0 at pci0 dev 2 function 0 "Intel Iris Graphics 6100" rev 0x09 > drm0 at inteldrm0 > inteldrm0: msi > inteldrm0: 2560x1600, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi > xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi, > xHCI > 1.0 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > "Intel 9 Series DMA" rev 0x03 at pci0 dev 21 function 0 not configured > "Intel 9 Series SPI" rev 0x03 at pci0 dev 21 function 4 not configured > "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured > azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: > msi > azalia1: codecs: Cirrus Logic CS4208 > audio0 at azalia1 > ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3 > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi > pci2 at ppb1 bus 2 > "Broadcom BCM15700A2" rev 0x00 at pci2 dev 0 function 0 not configured > ppb2 at pci0 dev 28 function 2 "Intel 9 Series PCIE" rev 0xe3: msi > pci3 at ppb2 bus 3 > bwfm0 at pci3 dev 0 function 0 "Broadcom BCM43602" rev 0x01: msi > ppb3 at pci0 dev 28 function 4 "Intel 9 Series PCIE" rev 0xe3: msi > pci4 at ppb3 bus 5 > ppb4 at pci4 dev 0 function 0 "Intel DSL5520 Thunderbolt" rev 0x00 > pci5 at ppb4 bus 6 > ppb5 at pci5 dev 0 function 0 "Intel DSL5520 Thunderbolt" rev 0x00: msi > pci6 at ppb5 bus 7 > "Intel DSL5520 Thunderbolt" rev 0x00 at pci6 dev 0 function 0 not > configured > ppb6 at pci5 dev 3 function 0 "Intel DSL5520 Thunderbolt" rev 0x00: msi > pci7 at ppb6 bus 8 > ppb7 at pci5 dev 4 function 0 "Intel DSL5520 Thunderbolt" rev 0x00: msi > pci8 at ppb7 bus 57 > ppb8 at pci5 dev 5 function 0 "Intel DSL5520 Thunderbolt" rev 0x00: msi > pci9 at ppb8 bus 58 > ppb9 at pci5 dev 6 function 0 "Intel DSL5520 Thunderbolt" rev 0x00: msi > pci10 at ppb9 bus 107 > ppb10 at pci0 dev 28 function 5 "Intel 9 Series PCIE" rev 0xe3: msi > pci11 at ppb10 bus 4 > ahci0 at pci11 dev 0 function 0 "Samsung SM951 AHCI" rev 0x01: apic 2 > int > 16, AHCI 1.3 > ahci0: port 0: 6.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, APPLE SSD SM0256, BXW1> SCSI3 0/ > direct > fixed naa.5002538900000000 > sd0: 239372MB, 512 bytes/sector, 490234752 sectors, thin > pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03 > ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic > 2 > int 18 > iic0 at ichiic0 > iic0: addr 0x26 00=01 12=80 16=75 26=0f 29=01 2c=ff 2d=90 2e=f0 2f=9f > 31=01 > 3e=09 3f=1f 42=84 50=03 51=d1 52=26 54=05 58=08 60=88 63=88 f0=04 f1=0a > f2=01 f3=84 words 00=0100 01=0000 02=0000 03=0000 04=0000 05=0000 > 06=0000 > 07=0000 > pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns8250, no fifo > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > asmc0 at isa0 port 0x300/32: rev 2.28f628, 670 keys > vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation) > efifb at mainbus0 not configured > urtwn0 at uhub0 port 1 configuration 1 interface 0 "Realtek 802.11n WLAN > Adapter" rev 2.00/2.00 addr 2 > urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address 74:da:38:e7:f3:a9 > uhidev0 at uhub0 port 3 configuration 1 interface 0 "Broadcom Corp. > Bluetooth USB Host Controller" rev 2.01/1.61 addr 3 > uhidev0: iclass 3/1, 1 report id > ukbd0 at uhidev0 reportid 1: 8 variable keys, 6 key codes > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > uhidev1 at uhub0 port 3 configuration 1 interface 1 "Broadcom Corp. > Bluetooth USB Host Controller" rev 2.01/1.61 addr 3 > uhidev1: iclass 3/1, 2 report ids > ums0 at uhidev1 reportid 2: 3 buttons > wsmouse0 at ums0 mux 0 > ugen0 at uhub0 port 3 configuration 1 "Broadcom Corp. Bluetooth USB Host > Controller" rev 2.01/1.61 addr 3 > uhidev2 at uhub0 port 5 configuration 1 interface 0 "Apple Inc. Apple > Internal Keyboard / Trackpad" rev 2.00/6.22 addr 4 > uhidev2: iclass 3/0, 224 report ids > uhid0 at uhidev2 reportid 224: input=4, output=0, feature=0 > uhidev3 at uhub0 port 5 configuration 1 interface 1 "Apple Inc. Apple > Internal Keyboard / Trackpad" rev 2.00/6.22 addr 4 > uhidev3: iclass 3/1, 63 report ids > ukbd1 at uhidev3 reportid 1: 8 variable keys, 6 key codes, country code > 13 > wskbd1 at ukbd1 mux 1 > wskbd1: connecting to wsdisplay0 > uhid1 at uhidev3 reportid 9: input=0, output=0, feature=3 > uhid2 at uhidev3 reportid 63: input=64, output=0, feature=0 > ubcmtp0 at uhub0 port 5 configuration 1 interface 2 "Apple Inc. Apple > Internal Keyboard / Trackpad" rev 2.00/6.22 addr 4 > wsmouse1 at ubcmtp0 mux 0 > uhidev4 at uhub0 port 5 configuration 1 interface 3 "Apple Inc. Apple > Internal Keyboard / Trackpad" rev 2.00/6.22 addr 4 > uhidev4: iclass 3/0, 83 report ids > uhid3 at uhidev4 reportid 63: input=15, output=0, feature=0 > uhid4 at uhidev4 reportid 83: input=0, output=63, feature=0 > uhidev5 at uhub0 port 5 configuration 1 interface 4 "Apple Inc. Apple > Internal Keyboard / Trackpad" rev 2.00/6.22 addr 4 > uhidev5: iclass 3/0, 192 report ids > uhid5 at uhidev5 reportid 192: input=107, output=0, feature=0 > umass0 at uhub0 port 14 configuration 1 interface 0 "Apple Card Reader" > rev > 3.00/8.20 addr 5 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd1 at scsibus2 targ 1 lun 0: <APPLE, SD Card Reader, 3.00> SCSI4 0/ > direct > removable serial.05ac8406000000000820 > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > root on sd0a (6ffdcfeb615dc415.a) swap on sd0b dump on sd0b > bwfm0: failed loadfirmware of file brcmfmac43602-pcie.bin > umass1 at uhub0 port 2 configuration 1 interface 0 "PNY USB 2.0 FD" rev > 2.00/1.00 addr 6 > umass1: using SCSI over Bulk-Only > scsibus5 at umass1: 2 targets, initiator 0 > sd2 at scsibus5 targ 1 lun 0: <PNY, USB 2.0 FD, 8.07> SCSI2 0/direct > removable > sd2: 15360MB, 512 bytes/sector, 31457280 sectors > syncing disks... done > rebooting... > OpenBSD 6.4 (RAMDISK_CD) #348: Thu Oct 11 13:36:16 MDT 2018 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD > real mem = 8469352448 (8077MB) > avail mem = 8208883712 (7828MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x8afac000 (32 entries) > bios0: vendor Apple Inc. version "MBP121.88Z.0177.B00.1806051659" date > 06/05/2018 > bios0: Apple Inc. MacBookPro12,1 > acpi0 at bios0: rev 2 > acpi0: tables DSDT FACP HPET APIC SBST ECDT SSDT SSDT SSDT SSDT SSDT > SSDT > SSDT SSDT DMAR MCFG > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-5257U CPU @ 2.70GHz, 2600.41 MHz, 06-3d-04 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS- > CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM, > 3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > cpu at mainbus0: not configured > cpu at mainbus0: not configured > cpu at mainbus0: not configured > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins > acpiec0 at acpi0 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PEG0) > acpiprt2 at acpi0: bus 1 (RP01) > acpiprt3 at acpi0: bus 2 (RP02) > acpiprt4 at acpi0: bus 3 (RP03) > acpiprt5 at acpi0: bus 5 (RP05) > acpiprt6 at acpi0: bus 4 (RP06) > acpicpu at acpi0 not configured > "PNP0B00" at acpi0 not configured > "APP0001" at acpi0 not configured > "ACPI0008" at acpi0 not configured > "ACPI0001" at acpi0 not configured > "ACPI0002" at acpi0 not configured > "APP000D" at acpi0 not configured > "ACPI0003" at acpi0 not configured > "PNP0C0D" at acpi0 not configured > "PNP0C0C" at acpi0 not configured > "APP0002" at acpi0 not configured > "PNP0C0E" at acpi0 not configured > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09 > "Intel Iris Graphics 6100" rev 0x09 at pci0 dev 2 function 0 not > configured > "Intel Core 5G HD Audio" rev 0x09 at pci0 dev 3 function 0 not > configured > xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi, > xHCI > 1.0 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > "Intel 9 Series DMA" rev 0x03 at pci0 dev 21 function 0 not configured > "Intel 9 Series SPI" rev 0x03 at pci0 dev 21 function 4 not configured > "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured > "Intel 9 Series HD Audio" rev 0x03 at pci0 dev 27 function 0 not > configured > ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3 > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi > pci2 at ppb1 bus 2 > "Broadcom BCM15700A2" rev 0x00 at pci2 dev 0 function 0 not configured > ppb2 at pci0 dev 28 function 2 "Intel 9 Series PCIE" rev 0xe3: msi > pci3 at ppb2 bus 3 > "Broadcom BCM43602" rev 0x01 at pci3 dev 0 function 0 not configured > ppb3 at pci0 dev 28 function 4 "Intel 9 Series PCIE" rev 0xe3: msi > pci4 at ppb3 bus 5 > ppb4 at pci4 dev 0 function 0 "Intel DSL5520 Thunderbolt" rev 0x00 > pci5 at ppb4 bus 6 > ppb5 at pci5 dev 0 function 0 "Intel DSL5520 Thunderbolt" rev 0x00: msi > pci6 at ppb5 bus 7 > "Intel DSL5520 Thunderbolt" rev 0x00 at pci6 dev 0 function 0 not > configured > ppb6 at pci5 dev 3 function 0 "Intel DSL5520 Thunderbolt" rev 0x00: msi > pci7 at ppb6 bus 8 > ppb7 at pci5 dev 4 function 0 "Intel DSL5520 Thunderbolt" rev 0x00: msi > pci8 at ppb7 bus 57 > ppb8 at pci5 dev 5 function 0 "Intel DSL5520 Thunderbolt" rev 0x00: msi > pci9 at ppb8 bus 58 > ppb9 at pci5 dev 6 function 0 "Intel DSL5520 Thunderbolt" rev 0x00: msi > pci10 at ppb9 bus 107 > ppb10 at pci0 dev 28 function 5 "Intel 9 Series PCIE" rev 0xe3: msi > pci11 at ppb10 bus 4 > ahci0 at pci11 dev 0 function 0 "Samsung SM951 AHCI" rev 0x01: apic 2 > int > 16, AHCI 1.3 > ahci0: port 0: 6.0Gb/s > scsibus0 at ahci0: 32 targets > sd0 at scsibus0 targ 0 lun 0: <ATA, APPLE SSD SM0256, BXW1> SCSI3 0/ > direct > fixed naa.5002538900000000 > sd0: 239372MB, 512 bytes/sector, 490234752 sectors, thin > "Intel 9 Series LPC" rev 0x03 at pci0 dev 31 function 0 not configured > "Intel 9 Series SMBus" rev 0x03 at pci0 dev 31 function 3 not configured > "Intel 9 Series Thermal" rev 0x03 at pci0 dev 31 function 6 not > configured > isa0 at mainbus0 > com0 at isa0 port 0x3f8/8 irq 4: ns8250, no fifo > efifb0 at mainbus0: 2560x1600, 32bpp > wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation) > urtwn0 at uhub0 port 1 configuration 1 interface 0 "Realtek 802.11n WLAN > Adapter" rev 2.00/2.00 addr 2 > urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address 74:da:38:e7:f3:a9 > umass0 at uhub0 port 2 configuration 1 interface 0 "PNY USB 2.0 FD" rev > 2.00/1.00 addr 3 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd1 at scsibus1 targ 1 lun 0: <PNY, USB 2.0 FD, 8.07> SCSI2 0/direct > removable > sd1: 15360MB, 512 bytes/sector, 31457280 sectors > uhidev0 at uhub0 port 3 configuration 1 interface 0 "Broadcom Corp. > Bluetooth USB Host Controller" rev 2.01/1.61 addr 4 > uhidev0: iclass 3/1, 1 report id > ukbd0 at uhidev0 reportid 1 > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > uhidev1 at uhub0 port 3 configuration 1 interface 1 "Broadcom Corp. > Bluetooth USB Host Controller" rev 2.01/1.61 addr 4 > uhidev1: iclass 3/1, 2 report ids > uhid at uhidev1 reportid 2 not configured > "Broadcom Corp. Bluetooth USB Host Controller" rev 2.01/1.61 addr 4 at > uhub0 port 3 configuration 1 not configured > uhidev2 at uhub0 port 5 configuration 1 interface 0 "Apple Inc. Apple > Internal Keyboard / Trackpad" rev 2.00/6.22 addr 5 > uhidev2: iclass 3/0, 224 report ids > uhid at uhidev2 reportid 224 not configured > uhidev3 at uhub0 port 5 configuration 1 interface 1 "Apple Inc. Apple > Internal Keyboard / Trackpad" rev 2.00/6.22 addr 5 > uhidev3: iclass 3/1, 63 report ids > ukbd1 at uhidev3 reportid 1 > wskbd1 at ukbd1 mux 1 > wskbd1: connecting to wsdisplay0 > uhid at uhidev3 reportid 9 not configured > uhid at uhidev3 reportid 63 not configured > uhidev4 at uhub0 port 5 configuration 1 interface 2 "Apple Inc. Apple > Internal Keyboard / Trackpad" rev 2.00/6.22 addr 5 > uhidev4: iclass 3/1, 68 report ids > uhid at uhidev4 reportid 2 not configured > uhid at uhidev4 reportid 63 not configured > uhid at uhidev4 reportid 68 not configured > uhidev5 at uhub0 port 5 configuration 1 interface 3 "Apple Inc. Apple > Internal Keyboard / Trackpad" rev 2.00/6.22 addr 5 > uhidev5: iclass 3/0, 83 report ids > uhid at uhidev5 reportid 63 not configured > uhid at uhidev5 reportid 83 not configured > uhidev6 at uhub0 port 5 configuration 1 interface 4 "Apple Inc. Apple > Internal Keyboard / Trackpad" rev 2.00/6.22 addr 5 > uhidev6: iclass 3/0, 192 report ids > uhid at uhidev6 reportid 192 not configured > umass1 at uhub0 port 14 configuration 1 interface 0 "Apple Card Reader" > rev > 3.00/8.20 addr 6 > umass1: using SCSI over Bulk-Only > scsibus2 at umass1: 2 targets, initiator 0 > sd2 at scsibus2 targ 1 lun 0: <APPLE, SD Card Reader, 3.00> SCSI4 0/ > direct > removable serial.05ac8406000000000820 > softraid0 at root > scsibus3 at softraid0: 256 targets > root on rd0a swap on rd0b dump on rd0b > syncing disks... > OpenBSD 6.4 (GENERIC.MP) #364: Thu Oct 11 13:30:23 MDT 2018 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 8469352448 (8077MB) > avail mem = 8203403264 (7823MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x8afac000 (32 entries) > bios0: vendor Apple Inc. version "MBP121.88Z.0177.B00.1806051659" date > 06/05/2018 > bios0: Apple Inc. MacBookPro12,1 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP HPET APIC SBST ECDT SSDT SSDT SSDT SSDT SSDT > SSDT > SSDT SSDT DMAR MCFG > acpi0: wakeup devices PEG0(S3) EC__(S3) HDEF(S3) RP01(S3) RP02(S3) > RP03(S4) > ARPT(S4) RP05(S3) RP06(S3) SPIT(S3) XHC1(S3) ADP1(S3) LID0(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-5257U CPU @ 2.70GHz, 2600.45 MHz, 06-3d-04 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS- > CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM, > 3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 100MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i5-5257U CPU @ 2.70GHz, 2600.01 MHz, 06-3d-04 > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS- > CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM, > 3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 1 (application processor) > cpu2: Intel(R) Core(TM) i5-5257U CPU @ 2.70GHz, 2600.01 MHz, 06-3d-04 > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS- > CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM, > 3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 1, core 0, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) i5-5257U CPU @ 2.70GHz, 2600.01 MHz, 06-3d-04 > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS- > CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM, > 3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 1, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins > acpiec0 at acpi0 > acpimcfg0 at acpi0 > acpimcfg0: addr 0xe0000000, bus 0-155 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PEG0) > acpiprt2 at acpi0: bus 1 (RP01) > acpiprt3 at acpi0: bus 2 (RP02) > acpiprt4 at acpi0: bus 3 (RP03) > acpiprt5 at acpi0: bus 5 (RP05) > acpiprt6 at acpi0: bus 4 (RP06) > acpicpu0 at acpi0: C3(200@530 mwait.1@0x60), C2(200@148 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C3(200@530 mwait.1@0x60), C2(200@148 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C3(200@530 mwait.1@0x60), C2(200@148 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C3(200@530 mwait.1@0x60), C2(200@148 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpisbs0 at acpi0: SBS0 model "bq20z451" serial 22651 type LION oem "DP" > acpicmos0 at acpi0 > "APP0001" at acpi0 not configured > "ACPI0008" at acpi0 not configured > "ACPI0001" at acpi0 not configured > "APP000D" at acpi0 not configured > acpiac0 at acpi0: AC unit offline > acpibtn0 at acpi0: LID0 > acpibtn1 at acpi0: PWRB > "APP0002" at acpi0 not configured > acpibtn2 at acpi0: SLPB > acpivideo0 at acpi0: IGPU > acpivout0 at acpivideo0: DD01 > cpu0: Enhanced SpeedStep 2600 MHz: speeds: 2701, 2700, 2600, 2300, 2000, > 1800, 1600, 1400, 1200, 900, 700, 500 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09 > inteldrm0 at pci0 dev 2 function 0 "Intel Iris Graphics 6100" rev 0x09 > drm0 at inteldrm0 > inteldrm0: msi > inteldrm0: 2560x1600, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi > xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi, > xHCI > 1.0 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > "Intel 9 Series DMA" rev 0x03 at pci0 dev 21 function 0 not configured > "Intel 9 Series SPI" rev 0x03 at pci0 dev 21 function 4 not configured > "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured > azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: > msi > azalia1: codecs: Cirrus Logic CS4208 > audio0 at azalia1 > ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3 > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi > pci2 at ppb1 bus 2 > "Broadcom BCM15700A2" rev 0x00 at pci2 dev 0 function 0 not configured > ppb2 at pci0 dev 28 function 2 "Intel 9 Series PCIE" rev 0xe3: msi > pci3 at ppb2 bus 3 > bwfm0 at pci3 dev 0 function 0 "Broadcom BCM43602" rev 0x01: msi > ppb3 at pci0 dev 28 function 4 "Intel 9 Series PCIE" rev 0xe3: msi > pci4 at ppb3 bus 5 > ppb4 at pci4 dev 0 function 0 "Intel DSL5520 Thunderbolt" rev 0x00 > pci5 at ppb4 bus 6 > ppb5 at pci5 dev 0 function 0 "Intel DSL5520 Thunderbolt" rev 0x00: msi > pci6 at ppb5 bus 7 > "Intel DSL5520 Thunderbolt" rev 0x00 at pci6 dev 0 function 0 not > configured > ppb6 at pci5 dev 3 function 0 "Intel DSL5520 Thunderbolt" rev 0x00: msi > pci7 at ppb6 bus 8 > ppb7 at pci5 dev 4 function 0 "Intel DSL5520 Thunderbolt" rev 0x00: msi > pci8 at ppb7 bus 57 > ppb8 at pci5 dev 5 function 0 "Intel DSL5520 Thunderbolt" rev 0x00: msi > pci9 at ppb8 bus 58 > ppb9 at pci5 dev 6 function 0 "Intel DSL5520 Thunderbolt" rev 0x00: msi > pci10 at ppb9 bus 107 > ppb10 at pci0 dev 28 function 5 "Intel 9 Series PCIE" rev 0xe3: msi > pci11 at ppb10 bus 4 > ahci0 at pci11 dev 0 function 0 "Samsung SM951 AHCI" rev 0x01: apic 2 > int > 16, AHCI 1.3 > ahci0: port 0: 6.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, APPLE SSD SM0256, BXW1> SCSI3 0/ > direct > fixed naa.5002538900000000 > sd0: 239372MB, 512 bytes/sector, 490234752 sectors, thin > pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03 > ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic > 2 > int 18 > iic0 at ichiic0 > iic0: addr 0x26 00=01 12=80 16=75 26=0f 29=01 2c=ff 2d=90 2e=f0 2f=9f > 31=01 > 3e=09 3f=1f 42=84 50=03 51=d1 52=26 54=05 58=08 60=88 63=88 f0=04 f1=0a > f2=01 f3=84 words 00=0100 01=0000 02=0000 03=0000 04=0000 05=0000 > 06=0000 > 07=0000 > pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns8250, no fifo > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > asmc0 at isa0 port 0x300/32: rev 2.28f628, 670 keys > vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation) > efifb at mainbus0 not configured > urtwn0 at uhub0 port 1 configuration 1 interface 0 "Realtek 802.11n WLAN > Adapter" rev 2.00/2.00 addr 2 > urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address 74:da:38:e7:f3:a9 > uhidev0 at uhub0 port 3 configuration 1 interface 0 "Broadcom Corp. > Bluetooth USB Host Controller" rev 2.01/1.61 addr 3 > uhidev0: iclass 3/1, 1 report id > ukbd0 at uhidev0 reportid 1: 8 variable keys, 6 key codes > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > uhidev1 at uhub0 port 3 configuration 1 interface 1 "Broadcom Corp. > Bluetooth USB Host Controller" rev 2.01/1.61 addr 3 > uhidev1: iclass 3/1, 2 report ids > ums0 at uhidev1 reportid 2: 3 buttons > wsmouse0 at ums0 mux 0 > ugen0 at uhub0 port 3 configuration 1 "Broadcom Corp. Bluetooth USB Host > Controller" rev 2.01/1.61 addr 3 > uhidev2 at uhub0 port 5 configuration 1 interface 0 "Apple Inc. Apple > Internal Keyboard / Trackpad" rev 2.00/6.22 addr 4 > uhidev2: iclass 3/0, 224 report ids > uhid0 at uhidev2 reportid 224: input=4, output=0, feature=0 > uhidev3 at uhub0 port 5 configuration 1 interface 1 "Apple Inc. Apple > Internal Keyboard / Trackpad" rev 2.00/6.22 addr 4 > uhidev3: iclass 3/1, 63 report ids > ukbd1 at uhidev3 reportid 1: 8 variable keys, 6 key codes, country code > 13 > wskbd1 at ukbd1 mux 1 > wskbd1: connecting to wsdisplay0 > uhid1 at uhidev3 reportid 9: input=0, output=0, feature=3 > uhid2 at uhidev3 reportid 63: input=64, output=0, feature=0 > ubcmtp0 at uhub0 port 5 configuration 1 interface 2 "Apple Inc. Apple > Internal Keyboard / Trackpad" rev 2.00/6.22 addr 4 > wsmouse1 at ubcmtp0 mux 0 > uhidev4 at uhub0 port 5 configuration 1 interface 3 "Apple Inc. Apple > Internal Keyboard / Trackpad" rev 2.00/6.22 addr 4 > uhidev4: iclass 3/0, 83 report ids > uhid3 at uhidev4 reportid 63: input=15, output=0, feature=0 > uhid4 at uhidev4 reportid 83: input=0, output=63, feature=0 > uhidev5 at uhub0 port 5 configuration 1 interface 4 "Apple Inc. Apple > Internal Keyboard / Trackpad" rev 2.00/6.22 addr 4 > uhidev5: iclass 3/0, 192 report ids > uhid5 at uhidev5 reportid 192: input=107, output=0, feature=0 > umass0 at uhub0 port 14 configuration 1 interface 0 "Apple Card Reader" > rev > 3.00/8.20 addr 5 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd1 at scsibus2 targ 1 lun 0: <APPLE, SD Card Reader, 3.00> SCSI4 0/ > direct > removable serial.05ac8406000000000820 > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > root on sd0a (746d71ef9e51161b.a) swap on sd0b dump on sd0b > bwfm0: failed loadfirmware of file brcmfmac43602-pcie.bin > umass1 at uhub0 port 2 configuration 1 interface 0 "Generic Mass > Storage" > rev 2.00/1.05 addr 6 > umass1: using SCSI over Bulk-Only > scsibus5 at umass1: 2 targets, initiator 0 > sd2 at scsibus5 targ 1 lun 0: <Generic, Flash Disk, 8.07> SCSI2 0/direct > removable > sd2: 5347MB, 512 bytes/sector, 10950758 sectors > sd3 at scsibus5 targ 1 lun 1: <Generic, Flash Disk, 8.07> SCSI2 0/direct > removable > sd3: 1336MB, 512 bytes/sector, 2737690 sectors, readonly > > > > -- > Manuel Solis
